| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode
Stop adjusting the horizontal timing values based on the
compression ratio in command mode. Bspec seems to be telling
us to do this only in video mode, and this is also how the
Windows driver does things.
This should also fix a div-by-zero on some machines because
the adjusted htotal ends up being so small that we end up with
line_time_us==0 when trying to determine the vtotal value in
command mode.
Note that this doesn't actually make the display on the
Huawei Matebook E work, but at least the kernel no longer
explodes when the driver loads.
(cherry picked from commit 0b475e91ecc2313207196c6d7fd5c53e1a878525) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/xe_pagefault: Disallow writes to read-only VMAs
The page fault handler should reject write/atomic access to read only
VMAs. Add code to handle this in xe_pagefault_service after the VMA
lookup.
v2:
- Apply max line length (Matthew)
(cherry picked from commit 714ee6754ac5fa3dc078856a196a6b124cd797a0) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption
When decrypting data that is not in-place (src != dst), there is
no need to save the high-order sequence bits in dst as it could
simply be re-copied from the source.
However, the data to be hashed need to be rearranged accordingly.
Thanks, |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix potential double free of skb
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_backlog_rcv() {
...
queued = x25_process_rx_frame(sk, skb);
...
if (!queued)
kfree_skb(skb);
} |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails
When hci_cmd_sync_queue_once() returns with error, the destroy callback
will not be called.
Fix leaking references / memory on these failures. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ignore explicit helper on new expectations
Use the existing master conntrack helper, anything else is not really
supported and it just makes validation more complicated, so just ignore
what helper userspace suggests for this expectation.
This was uncovered when validating CTA_EXPECT_CLASS via different helper
provided by userspace than the existing master conntrack helper:
BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0
Read of size 4 at addr ffff8880043fe408 by task poc/102
Call Trace:
nf_ct_expect_related_report+0x2479/0x27c0
ctnetlink_create_expect+0x22b/0x3b0
ctnetlink_new_expect+0x4bd/0x5c0
nfnetlink_rcv_msg+0x67a/0x950
netlink_rcv_skb+0x120/0x350
Allowing to read kernel memory bytes off the expectation boundary.
CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace
via netlink dump. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix regsafe() for pointers to packet
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets
When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.
The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: pn533: bound the UART receive buffer
pn532_receive_buf() appends every incoming byte to dev->recv_skb and
only resets the buffer after pn532_uart_rx_is_frame() recognizes a
complete frame. A continuous stream of bytes without a valid PN532 frame
header therefore keeps growing the skb until skb_put_u8() hits the tail
limit.
Drop the accumulated partial frame once the fixed receive buffer is full
so malformed UART traffic cannot grow the skb past
PN532_UART_SKB_BUFF_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: set backing store type from query type
bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the
firmware response in ctxm->type and later uses that value to index
fixed backing-store metadata arrays such as ctx_arr[] and
bnxt_bstore_to_trace[].
ctxm->type is fixed by the current backing-store query type and matches
the array index of ctx->ctx_arr. Set ctxm->type from the current loop
variable instead of depending on resp->type.
Also update the loop to advance type from next_valid_type in the for
statement, which keeps the control flow simpler for non-valid and
unchanged entries. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak
When building netlink messages, tc_chain_fill_node() never initializes
the tcm_info field of struct tcmsg. Since the allocation is not zeroed,
kernel heap memory is leaked to userspace through this 4-byte field.
The fix simply zeroes tcm_info alongside the other fields that are
already initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak
When processing Router Advertisements with user options the kernel
builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct
has three padding fields that are never zeroed and can leak kernel data
The fix is simple, just zeroes the padding fields. |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: add seqcount to protect the platform_label{,s} pair
The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have
an inconsistent view of platform_labels vs platform_label in case of a
concurrent resize (resize_platform_label_table, under
platform_mutex). This can lead to OOB accesses.
This patch adds a seqcount, so that we get a consistent snapshot.
Note that mpls_label_ok is also susceptible to this, so the check
against RTA_DST in rtm_to_route_config, done outside platform_mutex,
is not sufficient. This value gets passed to mpls_label_ok once more
in both mpls_route_add and mpls_route_del, so there is no issue, but
that additional check must not be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix error handling in mshv_region_pin
The current error handling has two issues:
First, pin_user_pages_fast() can return a short pin count (less than
requested but greater than zero) when it cannot pin all requested pages.
This is treated as success, leading to partially pinned regions being
used, which causes memory corruption.
Second, when an error occurs mid-loop, already pinned pages from the
current batch are not properly accounted for before calling
mshv_region_invalidate_pages(), causing a page reference leak.
Treat short pins as errors and fix partial batch accounting before
cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: me4000: Fix potential overrun of firmware buffer
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmware loading was totally broken before commit ac584af59945
("staging: comedi: me4000: fix firmware downloading"), but that is the
most sensible target for this fix. |
