| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate response sizes in ipc_validate_msg()
ipc_validate_msg() computes the expected message size for each
response type by adding (or multiplying) attacker-controlled fields
from the daemon response to a fixed struct size in unsigned int
arithmetic. Three cases can overflow:
KSMBD_EVENT_RPC_REQUEST:
msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz;
KSMBD_EVENT_SHARE_CONFIG_REQUEST:
msg_sz = sizeof(struct ksmbd_share_config_response) +
resp->payload_sz;
KSMBD_EVENT_LOGIN_REQUEST_EXT:
msg_sz = sizeof(struct ksmbd_login_response_ext) +
resp->ngroups * sizeof(gid_t);
resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition
can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes
signed and size_t, so a negative ngroups is converted to SIZE_MAX
before the multiply. A wrapped value of msg_sz that happens to
equal entry->msg_sz bypasses the size check on the next line, and
downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz,
kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the
unverified length.
Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST
paths to detect integer overflow without constraining functional
payload size; userspace ksmbd-tools grows NDR responses in 4096-byte
chunks for calls like NetShareEnumAll, so a hard transport cap is
unworkable on the response side. For LOGIN_REQUEST_EXT, reject
resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and
report the error from ipc_validate_msg() so it fires at the IPC
boundary; with that bound the subsequent multiplication and addition
stay well below UINT_MAX. The now-redundant ngroups check and
pr_err in ksmbd_alloc_user() are removed.
This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix
integer overflows on 32 bit systems"), which hardened the request
side. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate the whole DACL before rewriting it in cifsacl
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix dir separator in SMB1 UNIX mounts
When calling cifs_mount_get_tcon() with SMB1 UNIX mounts,
@cifs_sb->mnt_cifs_flags needs to be read or updated only after
calling reset_cifs_unix_caps(), otherwise it might end up with missing
CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits.
This fixes the wrong dir separator used in paths caused by the missing
CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid memory leak in f2fs_rename()
syzbot reported a f2fs bug as below:
BUG: memory leak
unreferenced object 0xffff888127f70830 (size 16):
comm "syz.0.23", pid 6144, jiffies 4294943712
hex dump (first 16 bytes):
3c af 57 72 5b e6 8f ad 6e 8e fd 33 42 39 03 ff <.Wr[...n..3B9..
backtrace (crc 925f8a80):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4520 [inline]
slab_alloc_node mm/slub.c:4844 [inline]
__do_kmalloc_node mm/slub.c:5237 [inline]
__kmalloc_noprof+0x3bd/0x560 mm/slub.c:5250
kmalloc_noprof include/linux/slab.h:954 [inline]
fscrypt_setup_filename+0x15e/0x3b0 fs/crypto/fname.c:364
f2fs_setup_filename+0x52/0xb0 fs/f2fs/dir.c:143
f2fs_rename+0x159/0xca0 fs/f2fs/namei.c:961
f2fs_rename2+0xd5/0xf20 fs/f2fs/namei.c:1308
vfs_rename+0x7ff/0x1250 fs/namei.c:6026
filename_renameat2+0x4f4/0x660 fs/namei.c:6144
__do_sys_renameat2 fs/namei.c:6173 [inline]
__se_sys_renameat2 fs/namei.c:6168 [inline]
__x64_sys_renameat2+0x59/0x80 fs/namei.c:6168
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in commit 40b2d55e0452 ("f2fs: fix to create selinux
label during whiteout initialization"), we added a call to
f2fs_setup_filename() without a matching call to f2fs_free_filename(),
fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: reject zero-length fixed buffer import
validate_fixed_range() admits buf_addr at the exact end of the
registered region when len is zero, because the check uses strict
greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed()
then computes offset == imu->len, which causes the bvec skip logic
to advance past the last bio_vec entry and read bv_offset from
out-of-bounds slab memory.
Return early from io_import_fixed() when len is zero. A zero-length
import has no data to transfer and should not walk the bvec array
at all.
BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0
Read of size 4 at addr ffff888002bcc254 by task poc/103
Call Trace:
io_import_reg_buf+0x697/0x7f0
io_write_fixed+0xd9/0x250
__io_issue_sqe+0xad/0x710
io_issue_sqe+0x7d/0x1100
io_submit_sqes+0x86a/0x23c0
__do_sys_io_uring_enter+0xa98/0x1590
Allocated by task 103:
The buggy address is located 12 bytes to the right of
allocated 584-byte region [ffff888002bcc000, ffff888002bcc248) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
syzbot reported use-after-free of AF_UNIX socket's sk->sk_socket
in sk_psock_verdict_data_ready(). [0]
In unix_stream_sendmsg(), the peer socket's ->sk_data_ready() is
called after dropping its unix_state_lock().
Although the sender socket holds the peer's refcount, it does not
prevent the peer's sock_orphan(), and the peer's sk_socket might
be freed after one RCU grace period.
Let's fetch the peer's sk->sk_socket and sk->sk_socket->ops under
RCU in sk_psock_verdict_data_ready().
[0]:
BUG: KASAN: slab-use-after-free in sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278
Read of size 8 at addr ffff8880594da860 by task syz.4.1842/11013
CPU: 1 UID: 0 PID: 11013 Comm: syz.4.1842 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278
unix_stream_sendmsg+0x8a3/0xe80 net/unix/af_unix.c:2482
sock_sendmsg_nosec net/socket.c:721 [inline]
__sock_sendmsg net/socket.c:736 [inline]
____sys_sendmsg+0x972/0x9f0 net/socket.c:2585
___sys_sendmsg+0x2a5/0x360 net/socket.c:2639
__sys_sendmsg net/socket.c:2671 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2674
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7facf899c819
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007facf9827028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007facf8c15fa0 RCX: 00007facf899c819
RDX: 0000000000000000 RSI: 0000200000000500 RDI: 0000000000000004
RBP: 00007facf8a32c91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007facf8c16038 R14: 00007facf8c15fa0 R15: 00007ffd41b01c78
</TASK>
Allocated by task 11013:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
unpoison_slab_object mm/kasan/common.c:340 [inline]
__kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366
kasan_slab_alloc include/linux/kasan.h:253 [inline]
slab_post_alloc_hook mm/slub.c:4538 [inline]
slab_alloc_node mm/slub.c:4866 [inline]
kmem_cache_alloc_lru_noprof+0x2b8/0x640 mm/slub.c:4885
sock_alloc_inode+0x28/0xc0 net/socket.c:316
alloc_inode+0x6a/0x1b0 fs/inode.c:347
new_inode_pseudo include/linux/fs.h:3003 [inline]
sock_alloc net/socket.c:631 [inline]
__sock_create+0x12d/0x9d0 net/socket.c:1562
sock_create net/socket.c:1656 [inline]
__sys_socketpair+0x1c4/0x560 net/socket.c:1803
__do_sys_socketpair net/socket.c:1856 [inline]
__se_sys_socketpair net/socket.c:1853 [inline]
__x64_sys_socketpair+0x9b/0xb0 net/socket.c:1853
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 15:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2685 [inline]
slab_free mm/slub.c:6165 [inline]
kmem_cache_free+0x187/0x630 mm/slub.c:6295
rcu_do_batch kernel/rcu/tree.c:
---truncated--- |
| A weakness has been identified in itsourcecode Courier Management System 1.0. This affects an unknown function of the file /edit_staff.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. |
| A security vulnerability has been detected in libssh2 up to 1.11.1. The impacted element is the function userauth_password of the file src/userauth.c. Such manipulation of the argument username_len/password_len leads to integer overflow. The attack may be launched remotely. The name of the patch is 256d04b60d80bf1190e96b0ad1e91b2174d744b1. A patch should be applied to remediate this issue. |
| A vulnerability was identified in itsourcecode Electronic Judging System 1.0. This affects an unknown part of the file /intrams/login.php. Such manipulation of the argument Username leads to sql injection. The attack can be launched remotely. The exploit is publicly available and might be used. |
| A security vulnerability has been detected in Totolink NR1800X 9.1.0u.6279_B20210910. The impacted element is the function find_host_ip of the component lighttpd. Such manipulation of the argument Host leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. |
| A flaw has been found in Open5GS up to 2.7.7. This issue affects the function amf_namf_callback_handle_sdm_data_change_notify of the file /namf-callback/v1/{id}/sdmsubscription-notify of the component AMF SBI Endpoint. This manipulation of the argument changeItem.newValue causes denial of service. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in nextlevelbuilder GoClaw and GoClaw Lite up to 3.8.5. This affects an unknown function of the component RPC Handler. This manipulation causes improper authorization. The attack may be initiated remotely. The exploit has been published and may be used. Upgrading to version 3.9.0 mitigates this issue. Patch name: 406022e79f4a18b3070a446712080571eff11e30. You should upgrade the affected component. |
| HKUDS OpenHarness contains a remote code execution vulnerability in the /bridge slash command that allows remote senders accepted by configuration to execute arbitrary operating system commands. Attackers can invoke the /bridge spawn command with attacker-controlled command text that is forwarded to the bridge session manager and executed through the shared shell subprocess helper, allowing them to spawn shell sessions as the OpenHarness process user and access local files, credentials, workspace state, and repository contents. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is an authentication bypass vulnerability in Traefik's ForwardAuth middleware when trustForwardHeader=false is configured and Traefik is deployed behind a trusted upstream proxy. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2. |
| A vulnerability was found in mem0ai mem0 up to 1.0.11. This affects the function pickle.load/pickle.dump of the file mem0/vector_stores/faiss.py. Performing a manipulation results in deserialization. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The patch is named 62dca096f9236010ca15fea9ba369ba740b86b7a. Applying a patch is the recommended action to fix this issue. |
| NSauditor 3.1.2.0 contains a buffer overflow vulnerability in the SNMP Auditor Community field that allows local attackers to crash the application by supplying an excessively long string. Attackers can paste a large payload into the Community field and trigger the Walk function to cause a denial of service condition. |
| Nsauditor 3.2.3 contains a denial of service vulnerability in the registration code input field that allows attackers to crash the application. Attackers can paste a large buffer of 256 repeated characters into the 'Key' field to trigger an application crash. |
| A flaw was found in rust-rpm-sequoia. An attacker can exploit this vulnerability by providing a specially crafted Red Hat Package Manager (RPM) file. During the RPM signature verification process, this crafted file can trigger an error in the OpenPGP signature parsing code, leading to an unconditional termination of the rpm process. This issue results in an application level denial of service, making the system unable to process RPM files for signature verification. |
