| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 detection engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.
This vulnerability is due to incomplete error checking when parsing remote procedure call (RPC) data. An attacker could exploit this vulnerability by sending crafted RPC packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts. |
| A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should be denied through an affected device.
This vulnerability is due to improper error handling when an affected device that is joining a cluster runs out of memory while replicating access control rules. An attacker could exploit this vulnerability by sending traffic that should be blocked through the device. A successful exploit could allow the attacker to bypass access controls and reach devices in protected networks. |
| A vulnerability in the Remote Access SSL VPN functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker with a valid VPN connection to exhaust device memory resulting in a denial of service (DoS) condition.This does not affect the management or MUS interfaces.
This vulnerability is due to trusting user input without validation. An attacker could exploit this vulnerability by sending crafted packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco Secure FTD Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. To exploit this vulnerability, the attacker must have valid administrative credentials on an affected device.
This vulnerability is due to insufficient input validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input for a specific CLI command. A successful exploit could allow the attacker to execute commands on the underlying operating system as root. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 detection engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.
This vulnerability is due to incomplete error checking when parsing the Multicast DNS fields of the HTTP header. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts. |
| Langchain Helm Charts are Helm charts for deploying Langchain applications on Kubernetes. Prior to langchain-ai/helm version 0.12.71, a URL parameter injection vulnerability existed in LangSmith Studio that could allow unauthorized access to user accounts through stolen authentication tokens. The vulnerability affected both LangSmith Cloud and self-hosted deployments. Authenticated LangSmith users who clicked on a specially crafted malicious link would have their bearer token, user ID, and workspace ID transmitted to an attacker-controlled server. With this stolen token, an attacker could impersonate the victim and access any LangSmith resources or perform any actions the user was authorized to perform within their workspace. The attack required social engineering (phishing, malicious links in emails or chat applications) to convince users to click the crafted URL. The stolen tokens expired after 5 minutes, though repeated attacks against the same user were possible if they could be convinced to click malicious links multiple times. The fix in version 0.12.71 implements validation requiring user-defined allowed origins for the baseUrl parameter, preventing tokens from being sent to unauthorized servers. No known workarounds are available. Self-hosted customers must upgrade to the patched version. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In version 0.24.6, by generating a combined traffic pattern of high-frequency publishes and rapid reconnect/kick-out using the same ClientID and massive subscribe/unsubscribe jitter, it is possible to reliably trigger heap memory corruption in the Broker process, causing it to exit immediately with SIGABRT due to free(): invalid pointer. As of time of publication, no known patched versions are available. |
| The XWiki blog application allows users of the XWiki platform to create and manage blog posts. Versions prior to 9.15.7 are vulnerable to Stored Cross-Site Scripting (XSS) via the Blog Post Title. The vulnerability arises because the post title is injected directly into the HTML <title> tag without proper escaping. An attacker with permissions to create or edit blog posts can inject malicious JavaScript into the title field. This script will execute in the browser of any user (including administrators) who views the blog post. This leads to potential session hijacking or privilege escalation. The vulnerability has been patched in the blog application version 9.15.7 by adding missing escaping. No known workarounds are available. |
| Open OnDemand is an open-source high-performance computing portal. The Files application in OnDemand versions prior to 4.0.9 and 4.1.3 is susceptible to malicious input when navigating to a directory. This has been patched in versions 4.0.9 and 4.1.3. Versions below this remain susceptible. |
| Zerobyte is a backup automation tool Zerobyte versions prior to 0.18.5 and 0.19.0 contain an authentication bypass vulnerability where authentication middleware is not properly applied to API endpoints. This results in certain API endpoints being accessible without valid session credentials. This is dangerous for those who have exposed Zerobyte to be used outside of their internal network. A fix has been applied in both version 0.19.0 and 0.18.5. If immediate upgrade is not possible, restrict network access to the Zerobyte instance to trusted networks only using firewall rules or network segmentation. This is only a temporary mitigation; upgrading is strongly recommended. |
| A vulnerability was detected in Mayan EDMS up to 4.10.1. The affected element is an unknown function of the file /authentication/. The manipulation results in cross site scripting. The attack may be performed from remote. The exploit is now public and may be used. Upgrading to version 4.10.2 is sufficient to fix this issue. You should upgrade the affected component. The vendor confirms that this is "[f]ixed in version 4.10.2". Furthermore, that "[b]ackports for older versions in process and will be out as soon as their respective CI pipelines complete." |
| A flaw has been found in Mayan EDMS up to 4.10.1. The impacted element is an unknown function of the file /authentication/. This manipulation causes open redirect. It is possible to initiate the attack remotely. The exploit has been published and may be used. Upgrading to version 4.10.2 is sufficient to resolve this issue. The affected component should be upgraded. The vendor confirms that this is "[f]ixed in version 4.10.2". Furthermore, that "[b]ackports for older versions in process and will be out as soon as their respective CI pipelines complete." |
| MyHoard is a daemon for creating, managing and restoring MySQL backups. Starting in version 1.0.1 and prior to version 1.3.0, in some cases, myhoard logs the whole backup info, including the encryption key. Version 1.3.0 fixes the issue. As a workaround, direct logs into /dev/null. |
| TP-Link Archer C50 V3 devices before Build 200318 Rel. 62209 allows remote attackers to cause a denial of service via a crafted HTTP Header containing an unexpected Referer field. |
| FastAPI Users allows users to quickly add a registration and authentication system to their FastAPI project. Prior to version 15.0.2, the OAuth login state tokens are completely stateless and carry no per-request entropy or any data that could link them to the session that initiated the OAuth flow. `generate_state_token()` is always called with an empty `state_data` dict, so the resulting JWT only contains the fixed audience claim plus an expiration timestamp. On callback, the library merely checks that the JWT verifies under `state_secret` and is unexpired; there is no attempt to match the state value to the browser that initiated the OAuth request, no correlation cookie, and no server-side cache. Any attacker can hit `/authorize`, capture the server-generated state, finish the upstream OAuth flow with their own provider account, and then trick a victim into loading `.../callback?code=<attacker_code>&state=<attacker_state>`. Because the state JWT is valid for any client for \~1 hour, the victim’s browser will complete the flow. This leads to login CSRF. Depending on the app’s logic, the login CSRF can lead to an account takeover of the victim account or to the victim user getting logged in to the attacker's account. Version 15.0.2 contains a patch for the issue. |
| A vulnerability was determined in Yalantis uCrop 2.2.11. This affects the function UCropActivity of the file AndroidManifest.xml. Executing manipulation can lead to improper export of android application components. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Yalantis uCrop 2.2.11. Affected by this issue is the function downloadFile of the file com.yalantis.ucrop.task.BitmapLoadTask.java of the component URL Handler. Performing manipulation results in server-side request forgery. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| 2N Access Commander application version 3.4.2 and prior returns HTTP 500 Internal Server Error responses when receiving malformed or manipulated requests, indicating improper handling of invalid input and potential security or availability impacts. |
| Enterprise Cloud Database developed by Ragic has a Arbitrary File Read vulnerability, allowing unauthenticated remote attackers to exploit Relative Path Traversal to download arbitrary system files. |
| Enterprise Cloud Database developed by Ragic has a Hard-coded Cryptographic Key vulnerability, allowing unauthenticated remote attackers to exploit the fixed key to generate verification information and log into the system as any user. |
