| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: apple: avoid memory leak in apple_report_fixup()
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: Avoid releasing netdev before teardown completes
The patch cited in the Fixes tag below changed the teardown code for
OVS ports to no longer unconditionally take the RTNL. After this change,
the netdev_destroy() callback can proceed immediately to the call_rcu()
invocation if the IFF_OVS_DATAPATH flag is already cleared on the
netdev.
The ovs_netdev_detach_dev() function clears the flag before completing
the unregistration, and if it gets preempted after clearing the flag (as
can happen on an -rt kernel), netdev_destroy() can complete and the
device can be freed before the unregistration completes. This leads to a
splat like:
[ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI
[ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT
[ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025
[ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0
[ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90
[ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246
[ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000
[ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05
[ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000
[ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006
[ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000
[ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000
[ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0
[ 998.393944] PKRU: 55555554
[ 998.393946] Call Trace:
[ 998.393949] <TASK>
[ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch]
[ 998.394009] ? __die_body.cold+0x8/0x12
[ 998.394016] ? die_addr+0x3c/0x60
[ 998.394027] ? exc_general_protection+0x16d/0x390
[ 998.394042] ? asm_exc_general_protection+0x26/0x30
[ 998.394058] ? dev_set_promiscuity+0x8d/0xa0
[ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch]
[ 998.394092] dp_device_event+0x41/0x80 [openvswitch]
[ 998.394102] notifier_call_chain+0x5a/0xd0
[ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60
[ 998.394110] rtnl_dellink+0x169/0x3e0
[ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0
[ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0
[ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0
[ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 998.394132] netlink_rcv_skb+0x50/0x100
[ 998.394138] netlink_unicast+0x292/0x3f0
[ 998.394141] netlink_sendmsg+0x21b/0x470
[ 998.394145] ____sys_sendmsg+0x39d/0x3d0
[ 998.394149] ___sys_sendmsg+0x9a/0xe0
[ 998.394156] __sys_sendmsg+0x7a/0xd0
[ 998.394160] do_syscall_64+0x7f/0x170
[ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 998.394165] RIP: 0033:0x7fad61bf4724
[ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724
[ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003
[ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f
[ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
This results in the following warning splat:
WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608
[...]
RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395)
[...]
Call Trace:
<TASK>
rtnetlink_rcv_msg (net/core/rtnetlink.c:6989)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585)
___sys_sendmsg (net/socket.c:2641)
__sys_sendmsg (net/socket.c:2671)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Fix this by allocating the size dynamically using nh_nlmsg_size() and
using nlmsg_new(), this is consistent with nexthop_notify() behavior. In
addition, adjust nh_nlmsg_size_grp() so it calculates the size needed
based on flags passed. While at it, also add the size of NHA_FDB for
nexthop group size calculation as it was missing too.
This cannot be reproduced via iproute2 as the group size is currently
limited and the command fails as follows:
addattr_l ERROR: message exceeded bound of 1048 |
| In the Linux kernel, the following vulnerability has been resolved:
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
[mkl: applied manually] |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions. |
| In the Linux kernel, the following vulnerability has been resolved:
X.509: Fix out-of-bounds access when parsing extensions
Leo reports an out-of-bounds access when parsing a certificate with
empty Basic Constraints or Key Usage extension because the first byte of
the extension is read before checking its length. Fix it.
The bug can be triggered by an unprivileged user by submitting a
specially crafted certificate to the kernel through the keyrings(7) API.
Leo has demonstrated this with a proof-of-concept program responsibly
disclosed off-list. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex
MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0)
queue teardown paths. This can race request object cleanup against vb2
queue cancellation and lead to use-after-free reports.
We already serialize request queueing against STREAMON/OFF with
req_queue_mutex. Extend that serialization to REQBUFS, and also take
the same mutex in media_request_ioctl_reinit() so REINIT is in the
same exclusion domain.
This keeps request cleanup and queue cancellation from running in
parallel for request-capable devices. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix OOB write in QUERY_INFO for compound requests
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: reject mount if bigalloc with s_first_data_block != 0
bigalloc with s_first_data_block != 0 is not supported, reject mounting
it. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: publish jinode after initialization
ext4_inode_attach_jinode() publishes ei->jinode to concurrent users.
It used to set ei->jinode before jbd2_journal_init_jbd_inode(),
allowing a reader to observe a non-NULL jinode with i_vfs_inode
still unset.
The fast commit flush path can then pass this jinode to
jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and
may crash.
Below is the crash I observe:
```
BUG: unable to handle page fault for address: 000000010beb47f4
PGD 110e51067 P4D 110e51067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
RIP: 0010:xas_find_marked+0x3d/0x2e0
Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02
RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246
RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003
RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10
RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec
R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000
R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88
FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
filemap_get_folios_tag+0x87/0x2a0
__filemap_fdatawait_range+0x5f/0xd0
? srso_alias_return_thunk+0x5/0xfbef5
? __schedule+0x3e7/0x10c0
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? cap_safe_nice+0x37/0x70
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
filemap_fdatawait_range_keep_errors+0x12/0x40
ext4_fc_commit+0x697/0x8b0
? ext4_file_write_iter+0x64b/0x950
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? vfs_write+0x356/0x480
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
ext4_sync_file+0xf7/0x370
do_fsync+0x3b/0x80
? syscall_trace_enter+0x108/0x1d0
__x64_sys_fdatasync+0x16/0x20
do_syscall_64+0x62/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
```
Fix this by initializing the jbd2_inode first.
Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after
initialization. Readers use READ_ONCE() to fetch the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix folio isn't locked in softleaf_to_folio()
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments] |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix stack-out-of-bounds read in l2cap_ecred_conn_req
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner
packet 'newskb' that is being reassembled. First a zero-copy approach is
tried if it succeeds then newskb becomes non-linear.
When a subsequent fragment in the same datagram does not meet the
fast-path conditions, a memory copy is performed. It calls skb_put() to
append the data and as newskb is non-linear it triggers
SKB_LINEAR_ASSERT check.
Oops: invalid opcode: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:skb_put+0x3c/0x40
[...]
Call Trace:
<IRQ>
iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs]
iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs]
iptfs_input+0x122/0x3e0 [xfrm_iptfs]
xfrm_input+0x91e/0x1a50
xfrm4_esp_rcv+0x3a/0x110
ip_protocol_deliver_rcu+0x1d7/0x1f0
ip_local_deliver_finish+0xbe/0x1e0
__netif_receive_skb_core.constprop.0+0xb56/0x1120
__netif_receive_skb_list_core+0x133/0x2b0
netif_receive_skb_list_internal+0x1ff/0x3f0
napi_complete_done+0x81/0x220
virtnet_poll+0x9d6/0x116e [virtio_net]
__napi_poll.constprop.0+0x2b/0x270
net_rx_action+0x162/0x360
handle_softirqs+0xdc/0x510
__irq_exit_rcu+0xe7/0x110
irq_exit_rcu+0xe/0x20
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
Fix this by checking if the skb is non-linear. If it is, linearize it by
calling skb_linearize(). As the initial allocation of newskb originally
reserved enough tailroom for the entire reassembled packet we do not
need to check if we have enough tailroom or extend it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
cxl_detach_ep() is called during bottom-up removal when all CXL memory
devices beneath a switch port have been removed. For each port in the
hierarchy it locks both the port and its parent, removes the endpoint,
and if the port is now empty, marks it dead and unregisters the port
by calling delete_switch_port(). There are two places during this work
where the parent_port may be used after freeing:
First, a concurrent detach may have already processed a port by the
time a second worker finds it via bus_find_device(). Without pinning
parent_port, it may already be freed when we discover port->dead and
attempt to unlock the parent_port. In a production kernel that's a
silent memory corruption, with lock debug, it looks like this:
[]DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current())
[]WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310
[]Call Trace:
[]mutex_unlock+0xd/0x20
[]cxl_detach_ep+0x180/0x400 [cxl_core]
[]devm_action_release+0x10/0x20
[]devres_release_all+0xa8/0xe0
[]device_unbind_cleanup+0xd/0xa0
[]really_probe+0x1a6/0x3e0
Second, delete_switch_port() releases three devm actions registered
against parent_port. The last of those is unregister_port() and it
calls device_unregister() on the child port, which can cascade. If
parent_port is now also empty the device core may unregister and free
it too. So by the time delete_switch_port() returns, parent_port may
be free, and the subsequent device_unlock(&parent_port->dev) operates
on freed memory. The kernel log looks same as above, with a different
offset in cxl_detach_ep().
Both of these issues stem from the absence of a lifetime guarantee
between a child port and its parent port.
Establish a lifetime rule for ports: child ports hold a reference to
their parent device until release. Take the reference when the port
is allocated and drop it when released. This ensures the parent is
valid for the full lifetime of the child and eliminates the use after
free window in cxl_detach_ep().
This is easily reproduced with a reload of cxl_acpi in QEMU with CXL
devices present. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
