| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix a memory leak in tpm2_load_cmd
'tpm2_load_cmd' allocates a tempoary blob indirectly via 'tpm2_key_decode'
but it is not freed in the failure paths. Address this by wrapping the blob
into with a cleanup helper. |
| Storybook is a frontend workshop for building user interface components and pages in isolation. Prior to versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10, the WebSocket functionality in Storybook's dev server, used to create and update stories, is vulnerable to WebSocket hijacking. This vulnerability only affects the Storybook dev server; production builds are not impacted. Exploitation requires a developer to visit a malicious website while their local Storybook dev server is running. Because the WebSocket connection does not validate the origin of incoming connections, a malicious site can silently send WebSocket messages to the local instance without any further user interaction. If the Storybook dev server is intentionally exposed publicly (e.g. for design reviews or stakeholder demos) the risk is higher, as no malicious site visit is required. Any unauthenticated attacker can send WebSocket messages to it directly. The vulnerability affects the WebSocket message handlers for creating and saving stories. Both are vulnerable to injection via unsanitized input in the componentFilePath field, which can be exploited to achieve persistent XSS or Remote Code Execution (RCE). Versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10 contain a fix for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix leaked ct in error paths
There are some situations where ct might be leaked as error paths are
skipping the refcounted check and return immediately. In order to solve
it make sure that the check is always called. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: phy: isp1301: fix non-OF device reference imbalance
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, the restoreConfig function in vikunja/pkg/modules/dump/restore.go of the go-vikunja/vikunja repository fails to sanitize file paths within the provided ZIP archive. A maliciously crafted ZIP can bypass the intended extraction directory to overwrite arbitrary files on the host system. Additionally, we’ve discovered that a malformed archive triggers a runtime panic, crashing the process immediately after the database has been wiped permanently. The application trusts the metadata in the ZIP archive. It uses the Name attribute of the zip.File struct directly in os.OpenFile calls without validation, allowing files to be written outside the intended directory. The restoration logic assumes a specific directory structure within the ZIP. When provided with a "minimalist" malicious ZIP, the application fails to validate the length of slices derived from the archive contents. Specifically, at line 154, the code attempts to access an index of len(ms)-2 on an insufficiently populated slice, triggering a panic. Version 2.0.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
| TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. A vulnerability in versions prior to 2.01 allows unauthenticated remote attackers to bypass the web server's CGI parameter security controls. Depending on the server configuration and the specific CGI executable in use, the impact is either source code disclosure or remote code execution (RCE). Anyone hosting CGI scripts (particularly interpreted languages like PHP) using vulnerable versions of TinyWeb is impacted. The problem has been patched in version 2.01. If upgrading is not immediately possible, ensure `STRICT_CGI_PARAMS` is enabled (it is defined by default in `define.inc`) and/or do not use CGI executables that natively accept dangerous command-line flags (such as `php-cgi.exe`). If hosting PHP, consider placing the server behind a Web Application Firewall (WAF) that explicitly blocks URL query string parameters that begin with a hyphen (`-`) or contain encoded double quotes (`%22`). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: always drop device refcount in ib_del_sub_device_and_put()
Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add
support to add/delete a sub IB device through netlink") grabs a reference
using ib_device_get_by_index() before calling ib_del_sub_device_and_put(),
we need to drop that reference before returning -EOPNOTSUPP error. |
| n8n is an open source workflow automation platform. Prior to versions 2.2.0 and 1.123.8, an authenticated user with permission to create or modify workflows could chain the Read/Write Files from Disk node with git operations to achieve remote code execution. By writing to specific configuration files and then triggering a git operation, the attacker could execute arbitrary shell commands on the n8n host. The issue has been fixed in n8n versions 2.2.0 and 1.123.8. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Read/Write Files from Disk node by adding `n8n-nodes-base.readWriteFile` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: ensure worker is torn down
When an IRQ worker is running, unplugging the device would cause a
crash. The sealevel hardware this driver was written for was not
hotpluggable, so I never realized it.
This change uses a spinlock to protect a list of workers, which
it tears down on disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node()
Previously, btrfs_get_or_create_delayed_node() set the delayed_node's
refcount before acquiring the root->delayed_nodes lock.
Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes")
moved refcount_set inside the critical section, which means there is
no longer a memory barrier between setting the refcount and setting
btrfs_inode->delayed_node.
Without that barrier, the stores to node->refs and
btrfs_inode->delayed_node may become visible out of order. Another
thread can then read btrfs_inode->delayed_node and attempt to
increment a refcount that hasn't been set yet, leading to a
refcounting bug and a use-after-free warning.
The fix is to move refcount_set back to where it was to take
advantage of the implicit memory barrier provided by lock
acquisition.
Because the allocations now happen outside of the lock's critical
section, they can use GFP_NOFS instead of GFP_ATOMIC. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: avoid chain re-validation if possible
Hamza Mahfooz reports cpu soft lock-ups in
nft_chain_validate():
watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547]
[..]
RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables]
[..]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_table_validate+0x6b/0xb0 [nf_tables]
nf_tables_validate+0x8b/0xa0 [nf_tables]
nf_tables_commit+0x1df/0x1eb0 [nf_tables]
[..]
Currently nf_tables will traverse the entire table (chain graph), starting
from the entry points (base chains), exploring all possible paths
(chain jumps). But there are cases where we could avoid revalidation.
Consider:
1 input -> j2 -> j3
2 input -> j2 -> j3
3 input -> j1 -> j2 -> j3
Then the second rule does not need to revalidate j2, and, by extension j3,
because this was already checked during validation of the first rule.
We need to validate it only for rule 3.
This is needed because chain loop detection also ensures we do not exceed
the jump stack: Just because we know that j2 is cycle free, its last jump
might now exceed the allowed stack size. We also need to update all
reachable chains with the new largest observed call depth.
Care has to be taken to revalidate even if the chain depth won't be an
issue: chain validation also ensures that expressions are not called from
invalid base chains. For example, the masquerade expression can only be
called from NAT postrouting base chains.
Therefore we also need to keep record of the base chain context (type,
hooknum) and revalidate if the chain becomes reachable from a different
hook location. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: disable recursive forward error correction
There are two problems with the recursive correction:
1. It may cause denial-of-service. In fec_read_bufs, there is a loop that
has 253 iterations. For each iteration, we may call verity_hash_for_block
recursively. There is a limit of 4 nested recursions - that means that
there may be at most 253^4 (4 billion) iterations. Red Hat QE team
actually created an image that pushes dm-verity to this limit - and this
image just makes the udev-worker process get stuck in the 'D' state.
2. It doesn't work. In fec_read_bufs we store data into the variable
"fio->bufs", but fio bufs is shared between recursive invocations, if
"verity_hash_for_block" invoked correction recursively, it would
overwrite partially filled fio->bufs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: avoid kernel-infoleak from struct iw_point
struct iw_point has a 32bit hole on 64bit arches.
struct iw_point {
void __user *pointer; /* Pointer to the data (in user space) */
__u16 length; /* number of fields or size in bytes */
__u16 flags; /* Optional params */
};
Make sure to zero the structure to avoid disclosing 32bits of kernel data
to user space. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could inject arbitrary scripts into pages rendered by the n8n application using different techniques on various nodes (Form Trigger node, Chat Trigger node, Send & Wait node, Webhook Node, and Chat Node). Scripts injected by a malicious workflow execute in the browser of any user who visits the affected page, enabling session hijacking and account takeover. The issues have been fixed in n8n versions 2.10.1 and 1.123.21. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Webhook node by adding `n8n-nodes-base.webhook` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, additional exploits in the expression evaluation of n8n have been identified and patched following CVE-2025-68613. An authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| Web Ofisi Emlak V2 contains multiple SQL injection vulnerabilities in the endpoint that allow unauthenticated attackers to manipulate database queries through GET parameters. Attackers can inject SQL code into parameters like emlak_durumu, emlak_tipi, il, ilce, kelime, and semt to extract sensitive database information or perform time-based blind SQL injection attacks. |
| Web Ofisi Platinum E-Ticaret v5 contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the 'q' GET parameter. Attackers can send requests to the arama endpoint with malicious 'q' values using time-based SQL injection techniques to extract sensitive database information. |
| Web Ofisi Platinum E-Ticaret v5 contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the 'q' parameter. Attackers can send POST requests to the ajax/productsFilterSearch endpoint with malicious 'q' values using time-based blind SQL injection techniques to extract sensitive database information. |
| bleon-ethical/api-gateway-deploy provides API gateway deployment. Version 1.0.0 is vulnerable to an attack chain involving OS Command Injection and Privilege Escalation. This allows an attacker to execute arbitrary commands with root privileges within the container, potentially leading to a container escape and unauthorized infrastructure modifications. This is fixed in version 1.0.1 by implementing strict input sanitization and secure delimiters in entrypoint.sh, enforcing a non-root user (appuser) in the Dockerfile, and establishing mandatory security quality gates. |
