Export limit exceeded: 346814 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (346814 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23435 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86: Move event pointer setup earlier in x86_pmu_enable() A production AMD EPYC system crashed with a NULL pointer dereference in the PMU NMI handler: BUG: kernel NULL pointer dereference, address: 0000000000000198 RIP: x86_perf_event_update+0xc/0xa0 Call Trace: <NMI> amd_pmu_v2_handle_irq+0x1a6/0x390 perf_event_nmi_handler+0x24/0x40 The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0, corresponding to the `if (unlikely(!hwc->event_base))` check in x86_perf_event_update() where hwc = &event->hw and event is NULL. drgn inspection of the vmcore on CPU 106 showed a mismatch between cpuc->active_mask and cpuc->events[]: active_mask: 0x1e (bits 1, 2, 3, 4) events[1]: 0xff1100136cbd4f38 (valid) events[2]: 0x0 (NULL, but active_mask bit 2 set) events[3]: 0xff1100076fd2cf38 (valid) events[4]: 0xff1100079e990a90 (valid) The event that should occupy events[2] was found in event_list[2] with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run (which clears hw.state and sets active_mask) but events[2] was never populated. Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH), showing it was stopped when the PMU rescheduled events, confirming the throttle-then-reschedule sequence occurred. The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") which moved the cpuc->events[idx] assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(), after the PERF_HES_ARCH check. This broke any path that calls pmu->start() without going through x86_pmu_enable() -- specifically the unthrottle path: perf_adjust_freq_unthr_events() -> perf_event_unthrottle_group() -> perf_event_unthrottle() -> event->pmu->start(event, 0) -> x86_pmu_start() // sets active_mask but not events[] The race sequence is: 1. A group of perf events overflows, triggering group throttle via perf_event_throttle_group(). All events are stopped: active_mask bits cleared, events[] preserved (x86_pmu_stop no longer clears events[] after commit 7e772a93eb61). 2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs due to other scheduling activity. Stopped events that need to move counters get PERF_HES_ARCH set and events[old_idx] cleared. In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events to be skipped -- events[new_idx] is never set. 3. The timer tick unthrottles the group via pmu->start(). Since commit 7e772a93eb61 removed the events[] assignment from x86_pmu_start(), active_mask[new_idx] is set but events[new_idx] remains NULL. 4. A PMC overflow NMI fires. The handler iterates active counters, finds active_mask[2] set, reads events[2] which is NULL, and crashes dereferencing it. Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to before the PERF_HES_ARCH check, so that events[] is populated even for events that are not immediately started. This ensures the unthrottle path via pmu->start() always finds a valid event pointer. | ||||
| CVE-2026-23436 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: shaper: protect from late creation of hierarchy We look up a netdev during prep of Netlink ops (pre- callbacks) and take a ref to it. Then later in the body of the callback we take its lock or RCU which are the actual protections. The netdev may get unregistered in between the time we take the ref and the time we lock it. We may allocate the hierarchy after flush has already run, which would lead to a leak. Take the instance lock in pre- already, this saves us from the race and removes the need for dedicated lock/unlock callbacks completely. After all, if there's any chance of write happening concurrently with the flush - we're back to leaking the hierarchy. We may take the lock for devices which don't support shapers but we're only dealing with SET operations here, not taking the lock would be optimizing for an error case. | ||||
| CVE-2026-23438 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: guard flow control update with global_tx_fc in buffer switching mvpp2_bm_switch_buffers() unconditionally calls mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and shared buffer pool modes. This function programs CM3 flow control registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference priv->cm3_base without any NULL check. When the CM3 SRAM resource is not present in the device tree (the third reg entry added by commit 60523583b07c ("dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains NULL and priv->global_tx_fc is false. Any operation that triggers mvpp2_bm_switch_buffers(), for example an MTU change that crosses the jumbo frame threshold, will crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits pc : readl+0x0/0x18 lr : mvpp2_cm3_read.isra.0+0x14/0x20 Call trace: readl+0x0/0x18 mvpp2_bm_pool_update_fc+0x40/0x12c mvpp2_bm_pool_update_priv_fc+0x94/0xd8 mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0 mvpp2_change_mtu+0x140/0x380 __dev_set_mtu+0x1c/0x38 dev_set_mtu_ext+0x78/0x118 dev_set_mtu+0x48/0xa8 dev_ifsioc+0x21c/0x43c dev_ioctl+0x2d8/0x42c sock_ioctl+0x314/0x378 Every other flow control call site in the driver already guards hardware access with either priv->global_tx_fc or port->tx_fc. mvpp2_bm_switch_buffers() is the only place that omits this check. Add the missing priv->global_tx_fc guard to both the disable and re-enable calls in mvpp2_bm_switch_buffers(), consistent with the rest of the driver. | ||||
| CVE-2026-23439 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0 (success) without actually creating a socket. Callers such as fou_create() then proceed to dereference the uninitialized socket pointer, resulting in a NULL pointer dereference. The captured NULL deref crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764) [...] Call Trace: <TASK> genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209) [...] netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1)) __sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1)) __x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130) This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so callers correctly take their error paths. There is only one caller of the vulnerable function and only privileged users can trigger it. | ||||
| CVE-2026-23441 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent concurrent access to IPSec ASO context The query or updating IPSec offload object is through Access ASO WQE. The driver uses a single mlx5e_ipsec_aso struct for each PF, which contains a shared DMA-mapped context for all ASO operations. A race condition exists because the ASO spinlock is released before the hardware has finished processing WQE. If a second operation is initiated immediately after, it overwrites the shared context in the DMA area. When the first operation's completion is processed later, it reads this corrupted context, leading to unexpected behavior and incorrect results. This commit fixes the race by introducing a private context within each IPSec offload object. The shared ASO context is now copied to this private context while the ASO spinlock is held. Subsequent processing uses this saved, per-object context, ensuring its integrity is maintained. | ||||
| CVE-2026-23443 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix previous acpi_processor_errata_piix4() fix After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()"), device pointers may be dereferenced after dropping references to the device objects pointed to by them, which may cause a use-after-free to occur. Moreover, debug messages about enabling the errata may be printed if the errata flags corresponding to them are unset. Address all of these issues by moving message printing to the points in the code where the errata flags are set. | ||||
| CVE-2026-23446 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: aqc111: Do not perform PM inside suspend callback syzbot reports "task hung in rpm_resume" This is caused by aqc111_suspend calling the PM variant of its write_cmd routine. The simplified call trace looks like this: rpm_suspend() usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING aqc111_suspend() - called for the usb device interface aqc111_write32_cmd() usb_autopm_get_interface() pm_runtime_resume_and_get() rpm_resume() - here we call rpm_resume() on our parent rpm_resume() - Here we wait for a status change that will never happen. At this point we block another task which holds rtnl_lock and locks up the whole networking stack. Fix this by replacing the write_cmd calls with their _nopm variants | ||||
| CVE-2026-23447 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check The same bounds-check bug fixed for NDP16 in the previous patch also exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated against the total skb length without accounting for ndpoffset, allowing out-of-bounds reads when the NDP32 is placed near the end of the NTB. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. Compile-tested only. | ||||
| CVE-2025-0186 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 10.6 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed an authenticated user to cause denial of service under certain conditions by exhausting server resources by making crafted requests to a discussions endpoint. | ||||
| CVE-2025-3922 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.4 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed an authenticated user to cause denial of service by overwhelming system resources under certain conditions due to insufficient resource allocation limits in the GraphQL API. | ||||
| CVE-2025-6016 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 9.2 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed an authenticated user to cause denial of service due to insufficient resource allocation limits when retrieving notes under certain conditions. | ||||
| CVE-2025-9957 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 2.7 Low |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 11.2 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that under certain conditions could have allowed an authenticated user with project owner permissions to bypass group fork prevention settings due to improper authorization checks. | ||||
| CVE-2026-1660 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.3 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that under certain conditions could have allowed an authenticated user to cause denial of service when importing issues due to improper input validation. | ||||
| CVE-2026-6290 | 1 Rapid7 | 1 Velociraptor | 2026-04-23 | 8 High |
| Velociraptor versions prior to 0.76.3 contain a vulnerability in the query() plugin which allows access to all orgs with the user's current ACL token. This allows an authenticated GUI user with access in one org, to use the query() plugin, in a notebook cell, to run VQL queries on other orgs which they may not have access to. The user's permissions in the other org are the same as the permissions they have in the org containing the notebook. | ||||
| CVE-2026-3254 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 3.5 Low |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.11 before 18.11.1 that under certain conditions could have allowed an authenticated user to load unauthorized content into another user's browser due to improper input validation in the Mermaid sandbox. | ||||
| CVE-2026-5262 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 8 High |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.1.0 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that under certain conditions could have allowed an unauthenticated user to access tokens in the Storybook development environment due to improper input validation. | ||||
| CVE-2026-5377 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 4.3 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.11 before 18.11.1 that could have allowed an authenticated user to access titles of confidential or private issues in public projects due to improper access control in the issue description rendering process. | ||||
| CVE-2026-5816 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 8 High |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.10 before 18.10.4 and 18.11 before 18.11.1 that could have allowed an unauthenticated user to execute arbitrary JavaScript in a user's browser session due to improper path validation under certain conditions. | ||||
| CVE-2019-25709 | 2 Codefuture, Scripteen | 2 Image Hosting Script, Free Image Hosting Script | 2026-04-23 | 9.8 Critical |
| CF Image Hosting Script 1.6.5 allows unauthenticated attackers to download and decode the application database by accessing the imgdb.db file in the upload/data directory. Attackers can extract delete IDs stored in plaintext from the deserialized database and use them to delete all pictures via the d parameter. | ||||
| CVE-2026-6515 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 5.4 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.2 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed a user to use invalidated or incorrectly scoped credentials to access Virtual Registries under certain conditions. | ||||