| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: make sure the first directory block is not a hole
The syzbot constructs a directory that has no dirblock but is non-inline,
i.e. the first directory block is a hole. And no errors are reported when
creating files in this directory in the following flow.
ext4_mknod
...
ext4_add_entry
// Read block 0
ext4_read_dirblock(dir, block, DIRENT)
bh = ext4_bread(NULL, inode, block, 0)
if (!bh && (type == INDEX || type == DIRENT_HTREE))
// The first directory block is a hole
// But type == DIRENT, so no error is reported.
After that, we get a directory block without '.' and '..' but with a valid
dentry. This may cause some code that relies on dot or dotdot (such as
make_indexed_dir()) to crash.
Therefore when ext4_read_dirblock() finds that the first directory block
is a hole report that the filesystem is corrupted and return an error to
avoid loading corrupted data from disk causing something bad. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Update log->page_{mask,bits} if log->page_size changed
If an NTFS file system is mounted to another system with different
PAGE_SIZE from the original system, log->page_size will change in
log_replay(), but log->page_{mask,bits} don't change correspondingly.
This will cause a panic because "u32 bytes = log->page_size - page_off"
will get a negative value in the later read_log_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to don't dirty inode for readonly filesystem
syzbot reports f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:933!
RIP: 0010:f2fs_evict_inode+0x1576/0x1590 fs/f2fs/inode.c:933
Call Trace:
evict+0x2a4/0x620 fs/inode.c:664
dispose_list fs/inode.c:697 [inline]
evict_inodes+0x5f8/0x690 fs/inode.c:747
generic_shutdown_super+0x9d/0x2c0 fs/super.c:675
kill_block_super+0x44/0x90 fs/super.c:1667
kill_f2fs_super+0x303/0x3b0 fs/f2fs/super.c:4894
deactivate_locked_super+0xc1/0x130 fs/super.c:484
cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256
task_work_run+0x24a/0x300 kernel/task_work.c:180
ptrace_notify+0x2cd/0x380 kernel/signal.c:2399
ptrace_report_syscall include/linux/ptrace.h:411 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:473 [inline]
syscall_exit_work kernel/entry/common.c:251 [inline]
syscall_exit_to_user_mode_prepare kernel/entry/common.c:278 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x15c/0x280 kernel/entry/common.c:296
do_syscall_64+0x50/0x110 arch/x86/entry/common.c:88
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The root cause is:
- do_sys_open
- f2fs_lookup
- __f2fs_find_entry
- f2fs_i_depth_write
- f2fs_mark_inode_dirty_sync
- f2fs_dirty_inode
- set_inode_flag(inode, FI_DIRTY_INODE)
- umount
- kill_f2fs_super
- kill_block_super
- generic_shutdown_super
- sync_filesystem
: sb is readonly, skip sync_filesystem()
- evict_inodes
- iput
- f2fs_evict_inode
- f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE))
: trigger kernel panic
When we try to repair i_current_depth in readonly filesystem, let's
skip dirty inode to avoid panic in later f2fs_evict_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.
It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.
So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Add a per-VF limit on number of FDIR filters
While the iavf driver adds a s/w limit (128) on the number of FDIR
filters that the VF can request, a malicious VF driver can request more
than that and exhaust the resources for other VFs.
Add a similar limit in ice. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/imx-irqsteer: Handle runtime power management correctly
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a segment issue when downgrading gso_size
Linearize the skb when downgrading gso_size because it may trigger a
BUG_ON() later when the skb is segmented as described in [1,2]. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: add missing condition check for existence of mapped data
nvme_map_data() is called when request has physical segments, hence
the nvme_unmap_data() should have same condition to avoid dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid
mkdir /mnt/test/comp
f2fs_io setflags compression /mnt/test/comp
dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1
truncate --size 13 /mnt/test/comp/testfile
In the above scenario, we can get a BUG_ON.
kernel BUG at fs/f2fs/segment.c:3589!
Call Trace:
do_write_page+0x78/0x390 [f2fs]
f2fs_outplace_write_data+0x62/0xb0 [f2fs]
f2fs_do_write_data_page+0x275/0x740 [f2fs]
f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs]
f2fs_write_multi_pages+0x1e5/0xae0 [f2fs]
f2fs_write_cache_pages+0xab1/0xc60 [f2fs]
f2fs_write_data_pages+0x2d8/0x330 [f2fs]
do_writepages+0xcf/0x270
__writeback_single_inode+0x44/0x350
writeback_sb_inodes+0x242/0x530
__writeback_inodes_wb+0x54/0xf0
wb_writeback+0x192/0x310
wb_workfn+0x30d/0x400
The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the
page was set the gcing flag by set_cluster_dirty(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don't BUG() the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mos7840: fix crash on resume
Since commit c49cfa917025 ("USB: serial: use generic method if no
alternative is provided in usb serial layer"), USB serial core calls the
generic resume implementation when the driver has not provided one.
This can trigger a crash on resume with mos7840 since support for
multiple read URBs was added back in 2011. Specifically, both port read
URBs are now submitted on resume for open ports, but the context pointer
of the second URB is left set to the core rather than mos7840 port
structure.
Fix this by implementing dedicated suspend and resume functions for
mos7840.
Tested with Delock 87414 USB 2.0 to 4x serial adapter.
[ johan: analyse crash and rewrite commit message; set busy flag on
resume; drop bulk-in check; drop unnecessary usb_kill_urb() ] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Fix scv instruction crash with kexec
kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.
Change the kexec sequence to disable AIL after other CPUs have been
brought down.
As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-switch, Create ingress ACL when needed
Currently, ingress acl is used for three features. It is created only
when vport metadata match and prio tag are enabled. But active-backup
lag mode also uses it. It is independent of vport metadata match and
prio tag. And vport metadata match can be disabled using the
following devlink command:
# devlink dev param set pci/0000:08:00.0 name esw_port_metadata \
value false cmode runtime
If ingress acl is not created, will hit panic when creating drop rule
for active-backup lag mode. If always create it, there will be about
5% performance degradation.
Fix it by creating ingress acl when needed. If esw_port_metadata is
true, ingress acl exists, then create drop rule using existing
ingress acl. If esw_port_metadata is false, create ingress acl and
then create drop rule. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot
Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:
BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA6390.
The commit is to fix a use-after-free issue within qca_serdev_shutdown()
by adding condition to avoid the serdev is flushed or wrote after closed
but also introduces this regression issue regarding above steps since the
VSC is not sent to reset controller during warm reboot.
Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled, and the use-after-free issue is also fixed by
this change since the serdev is still opened before it is flushed or wrote.
Verified by the reported machine Dell XPS 13 9310 laptop over below two
kernel commits:
commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of bluetooth-next tree.
commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of linus mainline tree. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/lima: fix shared irq handling on driver remove
lima uses a shared interrupt, so the interrupt handlers must be prepared
to be called at any time. At driver removal time, the clocks are
disabled early and the interrupts stay registered until the very end of
the remove process due to the devm usage.
This is potentially a bug as the interrupts access device registers
which assumes clocks are enabled. A crash can be triggered by removing
the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled.
This patch frees the interrupts at each lima device finishing callback
so that the handlers are already unregistered by the time we fully
disable clocks. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt.
nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel
crash when invoked during real mode interrupt handling (e.g. early HMI/MCE
interrupt handler) if percpu allocation comes from vmalloc area.
Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI()
wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when
percpu allocation is from the embedded first chunk. However with
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu
allocation can come from the vmalloc area.
With kernel command line "percpu_alloc=page" we can force percpu allocation
to come from vmalloc area and can see kernel crash in machine_check_early:
[ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110
[ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0
[ 1.215719] --- interrupt: 200
[ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable)
[ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0
[ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8
Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu
first chunk is not embedded. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedf: Make qedf_execute_tmf() non-preemptible
Stop calling smp_processor_id() from preemptible code in
qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel.
[ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646
[ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip finding free audio for unknown engine_id
[WHY]
ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it
also means it is uninitialized and does not need free audio.
[HOW]
Skip and return NULL.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx()
The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.
[74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526
[74412.556784] caller is netif_rx_internal+0x42/0x130
[74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5
[74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024
[74412.581699] Call Trace:
[74412.584514] <TASK>
[74412.586933] dump_stack_lvl+0x55/0x70
[74412.591129] check_preemption_disabled+0xc8/0xf0
[74412.596374] netif_rx_internal+0x42/0x130
[74412.600957] __netif_rx+0x20/0xd0
[74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev]
[74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport]
[74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport]
[74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd]
[74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd]
[74412.634046] irq_thread_fn+0x21/0x60
[74412.638134] ? irq_thread+0xa8/0x290
[74412.642218] irq_thread+0x1a0/0x290
[74412.646212] ? __pfx_irq_thread_fn+0x10/0x10
[74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10
[74412.656117] ? __pfx_irq_thread+0x10/0x10
[74412.660686] kthread+0x100/0x130
[74412.664384] ? __pfx_kthread+0x10/0x10
[74412.668639] ret_from_fork+0x31/0x50
[74412.672716] ? __pfx_kthread+0x10/0x10
[74412.676978] ret_from_fork_asm+0x1a/0x30
[74412.681457] </TASK>
The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.
While the following commit changed from netif_rx() to __netif_rx(),
baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."),
the change should've been a noop instead. However, the code precedes this
fix should've been using netif_rx_ni() or netif_rx_any_context(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: unconditionally flush pending work before notifier
syzbot reports:
KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831
KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530
KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45
[..]
Workqueue: events nf_tables_trans_destroy_work
Call Trace:
nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline]
nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline]
nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Problem is that the notifier does a conditional flush, but its possible
that the table-to-be-removed is still referenced by transactions being
processed by the worker, so we need to flush unconditionally.
We could make the flush_work depend on whether we found a table to delete
in nf-next to avoid the flush for most cases.
AFAICS this problem is only exposed in nf-next, with
commit e169285f8c56 ("netfilter: nf_tables: do not store nft_ctx in transaction objects"),
with this commit applied there is an unconditional fetch of
table->family which is whats triggering the above splat. |
