| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
If ctx->steps is zero, the loop processing ECC steps is skipped,
and the variable ret remains uninitialized. It is later checked
and returned, which leads to undefined behavior and may cause
unpredictable results in user space or kernel crashes.
This scenario can be triggered in edge cases such as misconfigured
geometry, ECC engine misuse, or if ctx->steps is not validated
after initialization.
Initialize ret to zero before the loop to ensure correct and safe
behavior regardless of the ctx->steps value.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid __bpf_prog_ret0_warn when jit fails
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1). |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: Relax constraint in draining guard
The active reference lifecycle provides the break/unbreak mechanism but
the active reference is not truly active after unbreak -- callers don't
use it afterwards but it's important for proper pairing of kn->active
counting. Assuming this mechanism is in place, the WARN check in
kernfs_should_drain_open_files() is too sensitive -- it may transiently
catch those (rightful) callers between
kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen
Ridong:
kernfs_remove_by_name_ns kernfs_get_active // active=1
__kernfs_remove // active=0x80000002
kernfs_drain ...
wait_event
//waiting (active == 0x80000001)
kernfs_break_active_protection
// active = 0x80000001
// continue
kernfs_unbreak_active_protection
// active = 0x80000002
...
kernfs_should_drain_open_files
// warning occurs
kernfs_put_active
To avoid the false positives (mind panic_on_warn) remove the check altogether.
(This is meant as quick fix, I think active reference break/unbreak may be
simplified with larger rework.) |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value
is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8).
This seems correct and aligns with the PTP interrupt status register
(PTP_INT_STS) specifications.
However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with
only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index:
lan743x_ptp_io_event_clock_get(..., u8 channel,...)
{
...
/* Update Local timestamp */
extts = &ptp->extts[channel];
extts->ts.tv_sec = sec;
...
}
To avoid an out-of-bounds write and utilize all the supported GPIO
inputs, set LAN743X_PTP_N_EXTTS to 8.
Detected using the static analysis tool - Svace. |
| In the Linux kernel, the following vulnerability has been resolved:
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
syzkaller reported a null-ptr-deref in sock_omalloc() while allocating
a CALIPSO option. [0]
The NULL is of struct sock, which was fetched by sk_to_full_sk() in
calipso_req_setattr().
Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"),
reqsk->rsk_listener could be NULL when SYN Cookie is returned to its
client, as hinted by the leading SYN Cookie log.
Here are 3 options to fix the bug:
1) Return 0 in calipso_req_setattr()
2) Return an error in calipso_req_setattr()
3) Alaways set rsk_listener
1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie
for CALIPSO. 3) is also no go as there have been many efforts to reduce
atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35
("tcp/dccp: do not touch listener sk_refcnt under synflood").
As of the blamed commit, SYN Cookie already did not need refcounting,
and no one has stumbled on the bug for 9 years, so no CALIPSO user will
care about SYN Cookie.
Let's return an error in calipso_req_setattr() and calipso_req_delattr()
in the SYN Cookie case.
This can be reproduced by [1] on Fedora and now connect() of nc times out.
[0]:
TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline]
RIP: 0010:sock_net include/net/sock.h:655 [inline]
RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806
Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
RSP: 0018:ffff88811af89038 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400
RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030
RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e
R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000
R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050
FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<IRQ>
ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288
calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204
calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597
netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249
selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342
selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551
security_inet_conn_request+0x50/0xa0 security/security.c:4945
tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825
tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275
tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328
tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781
tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667
tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904
ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436
ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:469 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netf
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Do not double dequeue a configuration request
Some of our devices crash in tb_cfg_request_dequeue():
general protection fault, probably for non-canonical address 0xdead000000000122
CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65
RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0
Call Trace:
<TASK>
? tb_cfg_request_dequeue+0x2d/0xa0
tb_cfg_request_work+0x33/0x80
worker_thread+0x386/0x8f0
kthread+0xed/0x110
ret_from_fork+0x38/0x50
ret_from_fork_asm+0x1b/0x30
The circumstances are unclear, however, the theory is that
tb_cfg_request_work() can be scheduled twice for a request:
first time via frame.callback from ring_work() and second
time from tb_cfg_request(). Both times kworkers will execute
tb_cfg_request_dequeue(), which results in double list_del()
from the ctl->request_queue (the list poison deference hints
at it: 0xdead000000000122).
Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE
bit set. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARN() in get_bpf_raw_tp_regs
syzkaller reported an issue:
WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
__bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
__bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
__traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
__do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
__mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
__mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
__bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: at91: Fix possible out-of-boundary access
at91_gpio_probe() doesn't check that given OF alias is not available or
something went wrong when trying to get it. This might have consequences
when accessing gpio_chips array with that value as an index. Note, that
BUG() can be compiled out and hence won't actually perform the required
checks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath11k_core_halt() only
reinitializes the "arvifs" list head. This will cause the
list node immediately following the list head to become an
invalid list node. Because the prev of that node still points
to the list head "arvifs", but the next of the list head "arvifs"
no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif
removal, and it happens before the spin_lock_bh(&ar->data_lock)
in ath11k_mac_op_remove_interface(), list_del() will detect the
previously mentioned situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the
list head "arvifs" during WLAN halt. The reinitialization is to make
the list nodes valid, ensuring that the list_del() in
ath11k_mac_op_remove_interface() can execute normally.
Call trace:
__list_del_entry_valid_or_report+0xb8/0xd0
ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k]
drv_remove_interface+0x48/0x194 [mac80211]
ieee80211_do_stop+0x6e0/0x844 [mac80211]
ieee80211_stop+0x44/0x17c [mac80211]
__dev_close_many+0xac/0x150
__dev_change_flags+0x194/0x234
dev_change_flags+0x24/0x6c
devinet_ioctl+0x3a0/0x670
inet_ioctl+0x200/0x248
sock_do_ioctl+0x60/0x118
sock_ioctl+0x274/0x35c
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x114
...
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: fix /proc/net/atm/lec handling
/proc/net/atm/lec must ensure safety against dev_lec[] changes.
It appears it had dev_put() calls without prior dev_hold(),
leading to imbalance and UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix invalid pointer access in debugfs
If the memory allocation in gpiolib_seq_start() fails, the s->private
field remains uninitialized and is later dereferenced without checking
in gpiolib_seq_stop(). Initialize s->private to NULL before calling
kzalloc() and check it before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Disable AFBC support on Mediatek DRM driver
Commit c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM
driver") added AFBC support to Mediatek DRM and enabled the
32x8/split/sparse modifier.
However, this is currently broken on Mediatek MT8188 (Genio 700 EVK
platform); tested using upstream Kernel and Mesa (v25.2.1), AFBC is used by
default since Mesa v25.0.
Kernel trace reports vblank timeouts constantly, and the render is garbled:
```
[CRTC:62:crtc-0] vblank wait timed out
WARNING: CPU: 7 PID: 70 at drivers/gpu/drm/drm_atomic_helper.c:1835 drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
[...]
Hardware name: MediaTek Genio-700 EVK (DT)
Workqueue: events_unbound commit_work
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
lr : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
sp : ffff80008337bca0
x29: ffff80008337bcd0 x28: 0000000000000061 x27: 0000000000000000
x26: 0000000000000001 x25: 0000000000000000 x24: ffff0000c9dcc000
x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c66f2f80
x20: ffff0000c0d7d880 x19: 0000000000000000 x18: 000000000000000a
x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000
x14: 0000000000000000 x13: 74756f2064656d69 x12: 742074696177206b
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082396a70
x8 : 0000000000057fa8 x7 : 0000000000000cce x6 : ffff8000823eea70
x5 : ffff0001fef5f408 x4 : ffff80017ccee000 x3 : ffff0000c12cb480
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c12cb480
Call trace:
drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c (P)
drm_atomic_helper_commit_tail_rpm+0x64/0x80
commit_tail+0xa4/0x1a4
commit_work+0x14/0x20
process_one_work+0x150/0x290
worker_thread+0x2d0/0x3ec
kthread+0x12c/0x210
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
```
Until this gets fixed upstream, disable AFBC support on this platform, as
it's currently broken with upstream Mesa. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: Remove calls to drm_put_dev()
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd
should be done by devres.
However, drm_put_dev() is still in the probe error and device remove
paths. When the driver fails to probe warnings like the following are
shown because devres is trying to drm_put_dev() after the driver
already did it.
[ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22
[ 5.649605] ------------[ cut here ]------------
[ 5.649607] refcount_t: underflow; use-after-free.
[ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
(cherry picked from commit 3eb8c0b4c091da0a623ade0d3ee7aa4a93df1ea4) |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Ensure XFD state on signal delivery
Sean reported [1] the following splat when running KVM tests:
WARNING: CPU: 232 PID: 15391 at xfd_validate_state+0x65/0x70
Call Trace:
<TASK>
fpu__clear_user_states+0x9c/0x100
arch_do_signal_or_restart+0x142/0x210
exit_to_user_mode_loop+0x55/0x100
do_syscall_64+0x205/0x2c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Chao further identified [2] a reproducible scenario involving signal
delivery: a non-AMX task is preempted by an AMX-enabled task which
modifies the XFD MSR.
When the non-AMX task resumes and reloads XSTATE with init values,
a warning is triggered due to a mismatch between fpstate::xfd and the
CPU's current XFD state. fpu__clear_user_states() does not currently
re-synchronize the XFD state after such preemption.
Invoke xfd_update_state() which detects and corrects the mismatch if
there is a dynamic feature.
This also benefits the sigreturn path, as fpu__restore_sig() may call
fpu__clear_user_states() when the sigframe is inaccessible.
[ dhansen: minor changelog munging ] |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: Fix deadlock in memory allocation under spinlock
Fix a AA deadlock in refill_skbs() where memory allocation while holding
skb_pool->lock can trigger a recursive lock acquisition attempt.
The deadlock scenario occurs when the system is under severe memory
pressure:
1. refill_skbs() acquires skb_pool->lock (spinlock)
2. alloc_skb() is called while holding the lock
3. Memory allocator fails and calls slab_out_of_memory()
4. This triggers printk() for the OOM warning
5. The console output path calls netpoll_send_udp()
6. netpoll_send_udp() attempts to acquire the same skb_pool->lock
7. Deadlock: the lock is already held by the same CPU
Call stack:
refill_skbs()
spin_lock_irqsave(&skb_pool->lock) <- lock acquired
__alloc_skb()
kmem_cache_alloc_node_noprof()
slab_out_of_memory()
printk()
console_flush_all()
netpoll_send_udp()
skb_dequeue()
spin_lock_irqsave(&skb_pool->lock) <- deadlock attempt
This bug was exposed by commit 248f6571fd4c51 ("netpoll: Optimize skb
refilling on critical path") which removed refill_skbs() from the
critical path (where nested printk was being deferred), letting nested
printk being called from inside refill_skbs()
Refactor refill_skbs() to never allocate memory while holding
the spinlock.
Another possible solution to fix this problem is protecting the
refill_skbs() from nested printks, basically calling
printk_deferred_{enter,exit}() in refill_skbs(), then, any nested
pr_warn() would be deferred.
I prefer this approach, given I _think_ it might be a good idea to move
the alloc_skb() from GFP_ATOMIC to GFP_KERNEL in the future, so, having
the alloc_skb() outside of the lock will be necessary step.
There is a possible TOCTOU issue when checking for the pool length, and
queueing the new allocated skb, but, this is not an issue, given that
an extra SKB in the pool is harmless and it will be eventually used. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: Do not dereference NULL pointer in plane reset
The plane state in __drm_gem_reset_shadow_plane() can be NULL. Do not
deref that pointer, but forward NULL to the other plane-reset helpers.
Clears plane->state to NULL.
v2:
- fix typo in commit description (Javier) |
| In the Linux kernel, the following vulnerability has been resolved:
sysfs: check visibility before changing group attribute ownership
Since commit 0c17270f9b92 ("net: sysfs: Implement is_visible for
phys_(port_id, port_name, switch_id)"), __dev_change_net_namespace() can
hit WARN_ON() when trying to change owner of a file that isn't visible.
See the trace below:
WARNING: CPU: 6 PID: 2938 at net/core/dev.c:12410 __dev_change_net_namespace+0xb89/0xc30
CPU: 6 UID: 0 PID: 2938 Comm: incusd Not tainted 6.17.1-1-mainline #1 PREEMPT(full) 4b783b4a638669fb644857f484487d17cb45ed1f
Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.07 02/19/2025
RIP: 0010:__dev_change_net_namespace+0xb89/0xc30
[...]
Call Trace:
<TASK>
? if6_seq_show+0x30/0x50
do_setlink.isra.0+0xc7/0x1270
? __nla_validate_parse+0x5c/0xcc0
? security_capable+0x94/0x1a0
rtnl_newlink+0x858/0xc20
? update_curr+0x8e/0x1c0
? update_entity_lag+0x71/0x80
? sched_balance_newidle+0x358/0x450
? psi_task_switch+0x113/0x2a0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x346/0x3e0
? sched_clock+0x10/0x30
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x59/0x110
netlink_unicast+0x285/0x3c0
? __alloc_skb+0xdb/0x1a0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x39f/0x3d0
? import_iovec+0x2f/0x40
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x81/0x970
? __sys_bind+0xe3/0x110
? syscall_exit_work+0x143/0x1b0
? do_syscall_64+0x244/0x970
? sock_alloc_file+0x63/0xc0
? syscall_exit_work+0x143/0x1b0
? do_syscall_64+0x244/0x970
? alloc_fd+0x12e/0x190
? put_unused_fd+0x2a/0x70
? do_sys_openat2+0xa2/0xe0
? syscall_exit_work+0x143/0x1b0
? do_syscall_64+0x244/0x970
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
Fix this by checking is_visible() before trying to touch the attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix GEM free for imported dma-bufs
Imported dma-bufs also have obj->resv != &obj->_resv. So we should
check both this condition in addition to flags for handling the
_NO_SHARE case.
Fixes this splat that was reported with IRIS video playback:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 2040 at drivers/gpu/drm/msm/msm_gem.c:1127 msm_gem_free_object+0x1f8/0x264 [msm]
CPU: 3 UID: 1000 PID: 2040 Comm: .gnome-shell-wr Not tainted 6.17.0-rc7 #1 PREEMPT
pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : msm_gem_free_object+0x1f8/0x264 [msm]
lr : msm_gem_free_object+0x138/0x264 [msm]
sp : ffff800092a1bb30
x29: ffff800092a1bb80 x28: ffff800092a1bce8 x27: ffffbc702dbdbe08
x26: 0000000000000008 x25: 0000000000000009 x24: 00000000000000a6
x23: ffff00083c72f850 x22: ffff00083c72f868 x21: ffff00087e69f200
x20: ffff00087e69f330 x19: ffff00084d157ae0 x18: 0000000000000000
x17: 0000000000000000 x16: ffffbc704bd46b80 x15: 0000ffffd0959540
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: ffffbc702e6cdb48 x10: 0000000000000000 x9 : 000000000000003f
x8 : ffff800092a1ba90 x7 : 0000000000000000 x6 : 0000000000000020
x5 : ffffbc704bd46c40 x4 : fffffdffe102cf60 x3 : 0000000000400032
x2 : 0000000000020000 x1 : ffff00087e6978e8 x0 : ffff00087e6977e8
Call trace:
msm_gem_free_object+0x1f8/0x264 [msm] (P)
drm_gem_object_free+0x1c/0x30 [drm]
drm_gem_object_handle_put_unlocked+0x138/0x150 [drm]
drm_gem_object_release_handle+0x5c/0xcc [drm]
drm_gem_handle_delete+0x68/0xbc [drm]
drm_gem_close_ioctl+0x34/0x40 [drm]
drm_ioctl_kernel+0xc0/0x130 [drm]
drm_ioctl+0x360/0x4e0 [drm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
Patchwork: https://patchwork.freedesktop.org/patch/676273/ |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add bpf_prog_run_data_pointers()
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba459202 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end. |
| In the Linux kernel, the following vulnerability has been resolved:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate(). |
