Export limit exceeded: 344767 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17601 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40050 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifier currently calls check_reg_arg() and adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations. However, if the destination register holds a pointer, these scalar adjustments are unnecessary and potentially incorrect. This patch adds a check to skip the adjustment logic when the destination register contains a pointer. | ||||
| CVE-2025-40051 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: vringh: Modify the return value check The return value of copy_from_iter and copy_to_iter can't be negative, check whether the copied lengths are equal. | ||||
| CVE-2025-40056 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: vringh: Fix copy_to_iter return value check The return value of copy_to_iter can't be negative, check whether the copied length is equal to the requested length instead of checking for negative values. | ||||
| CVE-2025-40061 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race in do_task() when draining When do_task() exhausts its iteration budget (!ret), it sets the state to TASK_STATE_IDLE to reschedule, without a secondary check on the current task->state. This can overwrite the TASK_STATE_DRAINING state set by a concurrent call to rxe_cleanup_task() or rxe_disable_task(). While state changes are protected by a spinlock, both rxe_cleanup_task() and rxe_disable_task() release the lock while waiting for the task to finish draining in the while(!is_done(task)) loop. The race occurs if do_task() hits its iteration limit and acquires the lock in this window. The cleanup logic may then proceed while the task incorrectly reschedules itself, leading to a potential use-after-free. This bug was introduced during the migration from tasklets to workqueues, where the special handling for the draining case was lost. Fix this by restoring the original pre-migration behavior. If the state is TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to force a new loop iteration. This allows the task to finish its work, so that a subsequent iteration can reach the switch statement and correctly transition the state to TASK_STATE_DRAINED, stopping the task as intended. | ||||
| CVE-2025-40063 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: comp - Use same definition of context alloc and free ops In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation code into acomp"), the crypto_acomp_streams struct was made to rely on having the alloc_ctx and free_ctx operations defined in the same order as the scomp_alg struct. But in that same commit, the alloc_ctx and free_ctx members of scomp_alg may be randomized by structure layout randomization, since they are contained in a pure ops structure (containing only function pointers). If the pointers within scomp_alg are randomized, but those in crypto_acomp_streams are not, then the order may no longer match. This fixes the problem by removing the union from scomp_alg so that both crypto_acomp_streams and scomp_alg will share the same definition of alloc_ctx and free_ctx, ensuring they will always have the same layout. | ||||
| CVE-2025-40065 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Write hgatp register with valid mode bits According to the RISC-V Privileged Architecture Spec, when MODE=Bare is selected,software must write zero to the remaining fields of hgatp. We have detected the valid mode supported by the HW before, So using a valid mode to detect how many vmid bits are supported. | ||||
| CVE-2025-40068 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: Fix integer overflow in run_unpack() The MFT record relative to the file being opened contains its runlist, an array containing information about the file's location on the physical disk. Analysis of all Call Stack paths showed that the values of the runlist array, from which LCNs are calculated, are not validated before run_unpack function. The run_unpack function decodes the compressed runlist data format from MFT attributes (for example, $DATA), converting them into a runs_tree structure, which describes the mapping of virtual clusters (VCN) to logical clusters (LCN). The NTFS3 subsystem also has a shortcut for deleting files from MFT records - in this case, the RUN_DEALLOCATE command is sent to the run_unpack input, and the function logic provides that all data transferred to the runlist about file or directory is deleted without creating a runs_tree structure. Substituting the runlist in the $DATA attribute of the MFT record for an arbitrary file can lead either to access to arbitrary data on the disk bypassing access checks to them (since the inode access check occurs above) or to destruction of arbitrary data on the disk. Add overflow check for addition operation. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-39998 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: target_core_configfs: Add length check to avoid buffer overflow A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes). snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes. Since snprintf() returns the total number of bytes that would have been written (the length of %s/%sn ), this value may exceed the buffer length (256 bytes) passed to memcpy(), this will ultimately cause function memcpy reporting a buffer overflow error. An additional check of the return value of snprintf() can avoid this buffer overflow. | ||||
| CVE-2025-39970 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: fix input validation logic for action_meta Fix condition to check 'greater or equal' to prevent OOB dereference. | ||||
| CVE-2025-39973 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: add validation for ring_len param The `ring_len` parameter provided by the virtual function (VF) is assigned directly to the hardware memory context (HMC) without any validation. To address this, introduce an upper boundary check for both Tx and Rx queue lengths. The maximum number of descriptors supported by the hardware is 8k-32. Additionally, enforce alignment constraints: Tx rings must be a multiple of 8, and Rx rings must be a multiple of 32. | ||||
| CVE-2025-39974 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix slab-out-of-bounds in _parse_integer_limit() When config osnoise cpus by write() syscall, the following KASAN splat may be observed: BUG: KASAN: slab-out-of-bounds in _parse_integer_limit+0x103/0x130 Read of size 1 at addr ffff88810121e3a1 by task test/447 CPU: 1 UID: 0 PID: 447 Comm: test Not tainted 6.17.0-rc6-dirty #288 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x55/0x70 print_report+0xcb/0x610 kasan_report+0xb8/0xf0 _parse_integer_limit+0x103/0x130 bitmap_parselist+0x16d/0x6f0 osnoise_cpus_write+0x116/0x2d0 vfs_write+0x21e/0xcc0 ksys_write+0xee/0x1c0 do_syscall_64+0xa8/0x2a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This issue can be reproduced by below code: const char *cpulist = "1"; int fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY); write(fd, cpulist, strlen(cpulist)); Function bitmap_parselist() was called to parse cpulist, it require that the parameter 'buf' must be terminated with a '\0' or '\n'. Fix this issue by adding a '\0' to 'buf' in osnoise_cpus_write(). | ||||
| CVE-2025-39975 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix wrong index reference in smb2_compound_op() In smb2_compound_op(), the loop that processes each command's response uses wrong indices when accessing response bufferes. This incorrect indexing leads to improper handling of command results. Also, if incorrectly computed index is greather than or equal to MAX_COMPOUND, it can cause out-of-bounds accesses. | ||||
| CVE-2025-39976 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Use correct exit on failure from futex_hash_allocate_default() copy_process() uses the wrong error exit path from futex_hash_allocate_default(). After exiting from futex_hash_allocate_default(), neither tasklist_lock nor siglock has been acquired. The exit label bad_fork_core_free unlocks both of these locks which is wrong. The next exit label, bad_fork_cancel_cgroup, is the correct exit. sched_cgroup_fork() did not allocate any resources that need to freed. Use bad_fork_cancel_cgroup on error exit from futex_hash_allocate_default(). | ||||
| CVE-2025-39979 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fs, fix UAF in flow counter release Fix a kernel trace [1] caused by releasing an HWS action of a local flow counter in mlx5_cmd_hws_delete_fte(), where the HWS action refcount and mutex were not initialized and the counter struct could already be freed when deleting the rule. Fix it by adding the missing initializations and adding refcount for the local flow counter struct. [1] Kernel log: Call Trace: <TASK> dump_stack_lvl+0x34/0x48 mlx5_fs_put_hws_action.part.0.cold+0x21/0x94 [mlx5_core] mlx5_fc_put_hws_action+0x96/0xad [mlx5_core] mlx5_fs_destroy_fs_actions+0x8b/0x152 [mlx5_core] mlx5_cmd_hws_delete_fte+0x5a/0xa0 [mlx5_core] del_hw_fte+0x1ce/0x260 [mlx5_core] mlx5_del_flow_rules+0x12d/0x240 [mlx5_core] ? ttwu_queue_wakelist+0xf4/0x110 mlx5_ib_destroy_flow+0x103/0x1b0 [mlx5_ib] uverbs_free_flow+0x20/0x50 [ib_uverbs] destroy_hw_idr_uobject+0x1b/0x50 [ib_uverbs] uverbs_destroy_uobject+0x34/0x1a0 [ib_uverbs] uobj_destroy+0x3c/0x80 [ib_uverbs] ib_uverbs_run_method+0x23e/0x360 [ib_uverbs] ? uverbs_finalize_object+0x60/0x60 [ib_uverbs] ib_uverbs_cmd_verbs+0x14f/0x2c0 [ib_uverbs] ? do_tty_write+0x1a9/0x270 ? file_tty_write.constprop.0+0x98/0xc0 ? new_sync_write+0xfc/0x190 ib_uverbs_ioctl+0xd7/0x160 [ib_uverbs] __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x59/0x90 | ||||
| CVE-2025-39980 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: Forbid FDB status change while nexthop is in a group The kernel forbids the creation of non-FDB nexthop groups with FDB nexthops: # ip nexthop add id 1 via 192.0.2.1 fdb # ip nexthop add id 2 group 1 Error: Non FDB nexthop group cannot have fdb nexthops. And vice versa: # ip nexthop add id 3 via 192.0.2.2 dev dummy1 # ip nexthop add id 4 group 3 fdb Error: FDB nexthop group can only have fdb nexthops. However, as long as no routes are pointing to a non-FDB nexthop group, the kernel allows changing the type of a nexthop from FDB to non-FDB and vice versa: # ip nexthop add id 5 via 192.0.2.2 dev dummy1 # ip nexthop add id 6 group 5 # ip nexthop replace id 5 via 192.0.2.2 fdb # echo $? 0 This configuration is invalid and can result in a NPD [1] since FDB nexthops are not associated with a nexthop device: # ip route add 198.51.100.1/32 nhid 6 # ping 198.51.100.1 Fix by preventing nexthop FDB status change while the nexthop is in a group: # ip nexthop add id 7 via 192.0.2.2 dev dummy1 # ip nexthop add id 8 group 7 # ip nexthop replace id 7 via 192.0.2.2 fdb Error: Cannot change nexthop FDB status while in a group. [1] BUG: kernel NULL pointer dereference, address: 00000000000003c0 [...] Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:fib_lookup_good_nhc+0x1e/0x80 [...] Call Trace: <TASK> fib_table_lookup+0x541/0x650 ip_route_output_key_hash_rcu+0x2ea/0x970 ip_route_output_key_hash+0x55/0x80 __ip4_datagram_connect+0x250/0x330 udp_connect+0x2b/0x60 __sys_connect+0x9c/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0xa4/0x2a0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2025-39993 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: fix races with imon_disconnect() Syzbot reports a KASAN issue as below: BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline] BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465 CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 __create_pipe include/linux/usb.h:1945 [inline] send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991 vfs_write+0x2d7/0xdd0 fs/read_write.c:576 ksys_write+0x127/0x250 fs/read_write.c:631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The iMON driver improperly releases the usb_device reference in imon_disconnect without coordinating with active users of the device. Specifically, the fields usbdev_intf0 and usbdev_intf1 are not protected by the users counter (ictx->users). During probe, imon_init_intf0 or imon_init_intf1 increments the usb_device reference count depending on the interface. However, during disconnect, usb_put_dev is called unconditionally, regardless of actual usage. As a result, if vfd_write or other operations are still in progress after disconnect, this can lead to a use-after-free of the usb_device pointer. Thread 1 vfd_write Thread 2 imon_disconnect ... if usb_put_dev(ictx->usbdev_intf0) else usb_put_dev(ictx->usbdev_intf1) ... while send_packet if pipe = usb_sndintpipe( ictx->usbdev_intf0) UAF else pipe = usb_sndctrlpipe( ictx->usbdev_intf0, 0) UAF Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by checking ictx->disconnected in all writer paths. Add early return with -ENODEV in send_packet(), vfd_write(), lcd_write() and display_open() if the device is no longer present. Set and read ictx->disconnected under ictx->lock to ensure memory synchronization. Acquire the lock in imon_disconnect() before setting the flag to synchronize with any ongoing operations. Ensure writers exit early and safely after disconnect before the USB core proceeds with cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2025-39994 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: tuner: xc5000: Fix use-after-free in xc5000_release The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv. A typical race condition is illustrated below: CPU 0 (release thread) | CPU 1 (delayed work callback) xc5000_release() | xc5000_do_timer_sleep() cancel_delayed_work() | hybrid_tuner_release_state(priv) | kfree(priv) | | priv = container_of() // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the timer_sleep is properly canceled before the xc5000_priv memory is deallocated. A deadlock concern was considered: xc5000_release() is called in a process context and is not holding any locks that the timer_sleep work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was initially identified through static analysis. [hverkuil: fix typo in Subject: tunner -> tuner] | ||||
| CVE-2025-43079 | 3 Linux, Qualys, Qualys Inc | 4 Linux, Cloud Agent, Cloud Agent For Linux and 1 more | 2026-04-15 | 6.3 Medium |
| The Qualys Cloud Agent included a bundled uninstall script (qagent_uninstall.sh), specific to Mac and Linux supported versions that invoked multiple system commands without using absolute paths and without sanitizing the $PATH environment. If the uninstall script is executed with elevated privileges (e.g., via sudo) in an environment where $PATH has been manipulated, an attacker with root/sudo privileges could cause malicious executables to be run in place of the intended system binaries. This behavior can be leveraged for local privilege escalation and arbitrary command execution under elevated privileges. | ||||
| CVE-2025-37186 | 2 Hp, Linux | 2 Aruba Virtual Intranet Access, Linux | 2026-04-15 | 7.8 High |
| A local privilege-escalation vulnerability has been discovered in the HPE Aruba Networking Virtual Intranet Access (VIA) client. Successful exploitation of this vulnerability could allow a local attacker to achieve arbitrary code execution with root privileges. | ||||
| CVE-2023-53693 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: Fix the memory leak in raw_gadget driver Currently, increasing raw_dev->count happens before invoke the raw_queue_event(), if the raw_queue_event() return error, invoke raw_release() will not trigger the dev_free() to be called. [ 268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event [ 268.912053][ T5067] udc dummy_udc.0: failed to start USB Raw Gadget: -12 [ 268.918885][ T5067] raw-gadget.0: probe of gadget.0 failed with error -12 [ 268.925956][ T5067] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy [ 268.934657][ T5067] misc raw-gadget: fail, usb_gadget_register_driver returned -16 BUG: memory leak [<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [<ffffffff8347eb55>] kmalloc include/linux/slab.h:582 [inline] [<ffffffff8347eb55>] kzalloc include/linux/slab.h:703 [inline] [<ffffffff8347eb55>] dev_new drivers/usb/gadget/legacy/raw_gadget.c:191 [inline] [<ffffffff8347eb55>] raw_open+0x45/0x110 drivers/usb/gadget/legacy/raw_gadget.c:385 [<ffffffff827d1d09>] misc_open+0x1a9/0x1f0 drivers/char/misc.c:165 [<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [<ffffffff8347cd2f>] kmalloc include/linux/slab.h:582 [inline] [<ffffffff8347cd2f>] raw_ioctl_init+0xdf/0x410 drivers/usb/gadget/legacy/raw_gadget.c:460 [<ffffffff8347dfe9>] raw_ioctl+0x5f9/0x1120 drivers/usb/gadget/legacy/raw_gadget.c:1250 [<ffffffff81685173>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [<ffffffff833ecc6a>] kmalloc include/linux/slab.h:582 [inline] [<ffffffff833ecc6a>] kzalloc include/linux/slab.h:703 [inline] [<ffffffff833ecc6a>] dummy_alloc_request+0x5a/0xe0 drivers/usb/gadget/udc/dummy_hcd.c:665 [<ffffffff833e9132>] usb_ep_alloc_request+0x22/0xd0 drivers/usb/gadget/udc/core.c:196 [<ffffffff8347f13d>] gadget_bind+0x6d/0x370 drivers/usb/gadget/legacy/raw_gadget.c:292 This commit therefore invoke kref_get() under the condition that raw_queue_event() return success. | ||||