| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Certain HP OfficeJet Pro printers may expose information if Cross‑Origin Resource Sharing (CORS) is misconfigured, potentially allowing unauthorized web origins to access device resource.
CORS is disabled by default on Pro‑class devices and can only be enabled by an administrator through the Embedded Web Server (EWS). Keeping CORS disabled unless explicitly required helps ensure that only trusted solutions can interact with the device. |
| A Cross-Origin Resource Sharing (CORS) misconfiguration vulnerability exists in Dify v1.9.1 in the /console/api/setup endpoint. The endpoint implements an insecure CORS policy that reflects any Origin header and enables Access-Control-Allow-Credentials: true, permitting arbitrary external domains to make authenticated requests. NOTE: the Supplier disputes this because the endpoint configuration is intentional to support bootstrap. |
| Windows Enroll Engine Security Feature Bypass Vulnerability |
| Cosign provides code signing and transparency for containers and binaries. Prior to versions 2.6.2 and 3.0.4, Cosign bundle can be crafted to successfully verify an artifact even if the embedded Rekor entry does not reference the artifact's digest, signature or public key. When verifying a Rekor entry, Cosign verifies the Rekor entry signature, and also compares the artifact's digest, the user's public key from either a Fulcio certificate or provided by the user, and the artifact signature to the Rekor entry contents. Without these comparisons, Cosign would accept any response from Rekor as valid. A malicious actor that has compromised a user's identity or signing key could construct a valid Cosign bundle by including any arbitrary Rekor entry, thus preventing the user from being able to audit the signing event. This issue has been patched in versions 2.6.2 and 3.0.4. |
| React Router is a router for React. In @remix-run/server-runtime version prior to 2.17.3. and react-router 7.0.0 through 7.11.0, React Router (or Remix v2) is vulnerable to CSRF attacks on document POST requests to UI routes when using server-side route action handlers in Framework Mode, or when using React Server Actions in the new unstable RSC modes. There is no impact if Declarative Mode (<BrowserRouter>) or Data Mode (createBrowserRouter/<RouterProvider>) is being used. This issue has been patched in @remix-run/server-runtime version 2.17.3 and react-router version 7.12.0. |
| Origin validation error vulnerability in BeeDrive in Synology BeeDrive for desktop before 1.4.3-13973 allows local users to write arbitrary files with non-sensitive information via unspecified vectors. |
| Issue summary: The 'openssl dgst' command-line tool silently truncates input
data to 16MB when using one-shot signing algorithms and reports success instead
of an error.
Impact summary: A user signing or verifying files larger than 16MB with
one-shot algorithms (such as Ed25519, Ed448, or ML-DSA) may believe the entire
file is authenticated while trailing data beyond 16MB remains unauthenticated.
When the 'openssl dgst' command is used with algorithms that only support
one-shot signing (Ed25519, Ed448, ML-DSA-44, ML-DSA-65, ML-DSA-87), the input
is buffered with a 16MB limit. If the input exceeds this limit, the tool
silently truncates to the first 16MB and continues without signaling an error,
contrary to what the documentation states. This creates an integrity gap where
trailing bytes can be modified without detection if both signing and
verification are performed using the same affected codepath.
The issue affects only the command-line tool behavior. Verifiers that process
the full message using library APIs will reject the signature, so the risk
primarily affects workflows that both sign and verify with the affected
'openssl dgst' command. Streaming digest algorithms for 'openssl dgst' and
library users are unaffected.
The FIPS modules in 3.5 and 3.6 are not affected by this issue, as the
command-line tools are outside the OpenSSL FIPS module boundary.
OpenSSL 3.5 and 3.6 are vulnerable to this issue.
OpenSSL 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| An issue was discovered in Nitro PDF Pro for Windows before 14.42.0.34. In certain cases, it displays signer information from a non-verified PDF field rather than from the verified certificate subject. This could allow a document to present inconsistent signer details. The display logic was updated to ensure signer information consistently reflects the verified certificate identity. |
| A mail spoofing vulnerability in Xerox Workplace Suite allows attackers to forge email headers, making it appear as though messages are sent from trusted sources. |
| Insufficient Verification of Data Authenticity vulnerability in TECNO Mobile com.Afmobi.Boomplayer allows Authentication Bypass.This issue affects com.Afmobi.Boomplayer: 7.4.63. |
| A Cross-Origin Resource Sharing (CORS) misconfiguration vulnerability exists in Dify v1.9.1 in the /console/api/system-features endpoint. The endpoint implements an overly permissive CORS policy that reflects arbitrary Origin headers and sets Access-Control-Allow-Credentials: true, allowing any external domain to make authenticated cross-origin requests. NOTE: the Supplier disputes this, providing the rationale of "sending requests with credentials does not provide any additional access compared to unauthenticated requests." |
| Grafana is an open source observability and data visualization platform. Versions prior to 9.1.8 and 8.5.14 are vulnerable to a bypass in the plugin signature verification. An attacker can convince a server admin to download and successfully run a malicious plugin even though unsigned plugins are not allowed. Versions 9.1.8 and 8.5.14 contain a patch for this issue. As a workaround, do not install plugins downloaded from untrusted sources. |
|
Some Honor products are affected by signature management vulnerability, successful exploitation could cause the forged system file overwrite the correct system file
|
|
Some Honor products are affected by signature management vulnerability, successful exploitation could cause the forged system file overwrite the correct system file
|
| IBM ApplinX 11.1 is vulnerable due to a privilege escalation vulnerability due to improper verification of JWT tokens. An attacker may be able to craft or modify a JSON web token in order to impersonate another user or to elevate their privileges. |
| The backup ZIPs are not signed by the application, leading to the possibility that an attacker can download a backup ZIP, modify and re-upload it. This allows the attacker to disrupt the application by configuring the services in a way that they are unable to run, making the application unusable. They can redirect traffic that is meant to be internal to their own hosted services and gathering information. |
| npm parcel 2.0.0-alpha and before has an Origin Validation Error vulnerability. Malicious websites can send XMLHTTPRequests to the application's development server and read the response to steal source code when developers visit them. |
| An Origin Validation Error vulnerability in an insufficient protected file of Juniper Networks Junos OS on EX4600 Series and QFX5000 Series allows an unauthenticated attacker with physical access to the device to create a backdoor which allows complete control of the system.
When a device isn't configured with a root password, an attacker can modify a specific file. It's contents will be added to the Junos configuration of the device without being visible. This allows for the addition of any configuration unknown
to the actual operator, which includes users, IP addresses and other configuration which could allow unauthorized access to the device.
This exploit is persistent across reboots and even zeroization.
The indicator of compromise is a modified /etc/config/<platform>-defaults[-flex].conf file. Review that file for unexpected configuration statements, or compare it to an unmodified version which can be extracted from the original Juniper software image file. For details on the extraction procedure please contact Juniper Technical Assistance Center (JTAC).
To restore the device to a trusted initial configuration the system needs to be reinstalled from physical media.
This issue affects Junos OS on EX4600 Series and QFX5000 Series:
* All versions before 21.4R3,
* 22.2 versions before 22.2R3-S3. |
| The AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. Users who use IAM OIDC custom resource provider package will download CA Thumbprints as part of the custom resource workflow. However, the current `tls.connect` method will always set `rejectUnauthorized: false` which is a potential security concern. CDK should follow the best practice and set `rejectUnauthorized: true`. However, this could be a breaking change for existing CDK applications and we should fix this with a feature flag. Note that this is marked as low severity Security advisory because the issuer url is provided by CDK users who define the CDK application. If they insist on connecting to a unauthorized OIDC provider, CDK should not disallow this. Additionally, the code block is run in a Lambda environment which mitigate the MITM attack. The patch is in progress. To mitigate, upgrade to CDK v2.177.0 (Expected release date 2025-02-22). Once upgraded, users should make sure the feature flag '@aws-cdk/aws-iam:oidcRejectUnauthorizedConnections' is set to true in `cdk.context.json` or `cdk.json`. There are no known workarounds for this vulnerability. |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 1.93, the server uses the Origin value from the request headers as the email link baseUrl without validation. If an attacker controls the Origin, password reset / email verification links in emails can be generated pointing to the attacker’s domain, causing authentication tokens to be exposed and potentially leading to account takeover. This vulnerability is fixed in 1.93. |
