| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In guix-daemon in GNU Guix before 1618ca7, a content-addressed-mirrors file can be written to create a setuid program that allows a regular user to gain the privileges of the build user that runs it (even after the build has ended). |
| Click Studios Passwordstate before 9.9 Build 9972 has a potential authentication bypass for Passwordstate emergency access. By using a crafted URL while on the Emergency Access web page, an unauthorized person can gain access to the Passwordstate Administration section. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/amd: flush any delayed gfxoff on suspend entry"
commit ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring
callbacks") caused GFXOFF control to be used more heavily and the
codepath that was removed from commit 0dee72639533 ("drm/amd: flush any
delayed gfxoff on suspend entry") now can be exercised at suspend again.
Users report that by using GNOME to suspend the lockscreen trigger will
cause SDMA traffic and the system can deadlock.
This reverts commit 0dee726395333fea833eaaf838bc80962df886c8. |
| In One Identity OneLogin before 2025.3.0, a request returns the OIDC client secret with GET Apps API v2 (even though this secret should only be returned when an App is first created), |
| A vulnerability in the Hot Standby Router Protocol (HSRP) subsystem of Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to receive potentially sensitive information from an affected device. The vulnerability is due to insufficient memory initialization. An attacker could exploit this vulnerability by receiving HSRPv2 traffic from an adjacent HSRP member. A successful exploit could allow the attacker to receive potentially sensitive information from the adjacent device. |
| D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix crash when replugging CSR fake controllers
It seems fake CSR 5.0 clones can cause the suspend notifier to be
registered twice causing the following kernel panic:
[ 71.986122] Call Trace:
[ 71.986124] <TASK>
[ 71.986125] blocking_notifier_chain_register+0x33/0x60
[ 71.986130] hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da]
[ 71.986154] btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477]
[ 71.986159] ? __pm_runtime_set_status+0x1a9/0x300
[ 71.986162] ? ktime_get_mono_fast_ns+0x3e/0x90
[ 71.986167] usb_probe_interface+0xe3/0x2b0
[ 71.986171] really_probe+0xdb/0x380
[ 71.986174] ? pm_runtime_barrier+0x54/0x90
[ 71.986177] __driver_probe_device+0x78/0x170
[ 71.986180] driver_probe_device+0x1f/0x90
[ 71.986183] __device_attach_driver+0x89/0x110
[ 71.986186] ? driver_allows_async_probing+0x70/0x70
[ 71.986189] bus_for_each_drv+0x8c/0xe0
[ 71.986192] __device_attach+0xb2/0x1e0
[ 71.986195] bus_probe_device+0x92/0xb0
[ 71.986198] device_add+0x422/0x9a0
[ 71.986201] ? sysfs_merge_group+0xd4/0x110
[ 71.986205] usb_set_configuration+0x57a/0x820
[ 71.986208] usb_generic_driver_probe+0x4f/0x70
[ 71.986211] usb_probe_device+0x3a/0x110
[ 71.986213] really_probe+0xdb/0x380
[ 71.986216] ? pm_runtime_barrier+0x54/0x90
[ 71.986219] __driver_probe_device+0x78/0x170
[ 71.986221] driver_probe_device+0x1f/0x90
[ 71.986224] __device_attach_driver+0x89/0x110
[ 71.986227] ? driver_allows_async_probing+0x70/0x70
[ 71.986230] bus_for_each_drv+0x8c/0xe0
[ 71.986232] __device_attach+0xb2/0x1e0
[ 71.986235] bus_probe_device+0x92/0xb0
[ 71.986237] device_add+0x422/0x9a0
[ 71.986239] ? _dev_info+0x7d/0x98
[ 71.986242] ? blake2s_update+0x4c/0xc0
[ 71.986246] usb_new_device.cold+0x148/0x36d
[ 71.986250] hub_event+0xa8a/0x1910
[ 71.986255] process_one_work+0x1c4/0x380
[ 71.986259] worker_thread+0x51/0x390
[ 71.986262] ? rescuer_thread+0x3b0/0x3b0
[ 71.986264] kthread+0xdb/0x110
[ 71.986266] ? kthread_complete_and_exit+0x20/0x20
[ 71.986268] ret_from_fork+0x1f/0x30
[ 71.986273] </TASK>
[ 71.986274] ---[ end trace 0000000000000000 ]---
[ 71.986284] btusb: probe of 2-1.6:1.0 failed with error -17 |
| TorchServe is a flexible and easy-to-use tool for serving and scaling PyTorch models in production. In affected versions the two gRPC ports 7070 and 7071, are not bound to [localhost](http://localhost/) by default, so when TorchServe is launched, these two interfaces are bound to all interfaces. Customers using PyTorch inference Deep Learning Containers (DLC) through Amazon SageMaker and EKS are not affected. This issue in TorchServe has been fixed in PR #3083. TorchServe release 0.11.0 includes the fix to address this vulnerability. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Moby is an open source container framework that is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. In 26.0.0, IPv6 is not disabled on network interfaces, including those belonging to networks where `--ipv6=false`. An container with an `ipvlan` or `macvlan` interface will normally be configured to share an external network link with the host machine. Because of this direct access, (1) Containers may be able to communicate with other hosts on the local network over link-local IPv6 addresses, (2) if router advertisements are being broadcast over the local network, containers may get SLAAC-assigned addresses, and (3) the interface will be a member of IPv6 multicast groups. This means interfaces in IPv4-only networks present an unexpectedly and unnecessarily increased attack surface. The issue is patched in 26.0.2. To completely disable IPv6 in a container, use `--sysctl=net.ipv6.conf.all.disable_ipv6=1` in the `docker create` or `docker run` command. Or, in the service configuration of a `compose` file. |
| Uninitialized data in endianness conversion in the XEvent handling of the X.Org X Server before 2017-06-19 allowed authenticated malicious users to access potentially privileged data from the X server. |
| A flaw was found in the way xserver memory was not properly initialized. This could leak parts of server memory to the X client. In cases where Xorg server runs with elevated privileges, this could result in possible ASLR bypass. Xorg-server before version 1.20.9 is vulnerable. |
| Improper initialization in some Intel(R) Power Gadget software for Windwos all versions may allow an authenticated user to potentially enable denial of service via local access. |
| Iterator failure issue in the multi-mode input module.
Impact: Successful exploitation of this vulnerability may cause iterator failures and affect availability. |
| Improper initialization in the Linux kernel-mode driver for some Intel(R) I350 Series Ethernet before version 5.19.2 may allow an authenticated user to potentially enable Information disclosure via data exposure. |
| Softing Secure Integration Server Exposure of Resource to Wrong Sphere Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Softing Secure Integration Server. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the handling of OPC FileDirectory namespaces. The issue results from the lack of proper validation of user-supplied data before using it to create a server object. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-20547. |
| After initial configuration, the Ruggedcom Discovery Protocol (RCDP) is still able to write to the device under certain conditions.
This could allow an attacker located in the adjacent network of the targeted device to perform unauthorized administrative actions. |
| MantisBT is an open source bug tracker. Due to insufficient access-level checks on the Wiki redirection page, any user can reveal private Projects' names, by accessing wiki.php with sequentially incremented IDs. This issue has been addressed in commit `65c44883f` which has been included in release `2.25.8`. Users are advised to upgrade. Users unable to upgrade should disable wiki integration ( `$g_wiki_enable = OFF;`). |
| Parallels Desktop Updater Improper Initialization Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop. An attacker must first obtain the ability to execute low-privileged code on the target host system in order to exploit this vulnerability.
The specific flaw exists within the Updater service. The issue results from the lack of proper initialization of environment variables. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root.
. Was ZDI-CAN-18229. |
| Parallels Desktop Service Improper Initialization Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop. An attacker must first obtain the ability to execute low-privileged code on the target host system in order to exploit this vulnerability.
The specific flaw exists within the Parallels Service. The issue results from the lack of proper initialization of environment variables. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-17751. |
| Parallels Desktop Updater Improper Initialization Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop. An attacker must first obtain the ability to execute low-privileged code on the target host system in order to exploit this vulnerability.
The specific flaw exists within the Updater service. The issue results from the lack of proper initialization of environment variables. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root.
. Was ZDI-CAN-18253. |
