| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix use-after-free in nf_tables_addchain()
nf_tables_addchain() publishes the chain to table->chains via
list_add_tail_rcu() (in nft_chain_add()) before registering hooks.
If nf_tables_register_hook() then fails, the error path calls
nft_chain_del() (list_del_rcu()) followed by nf_tables_chain_destroy()
with no RCU grace period in between.
This creates two use-after-free conditions:
1) Control-plane: nf_tables_dump_chains() traverses table->chains
under rcu_read_lock(). A concurrent dump can still be walking
the chain when the error path frees it.
2) Packet path: for NFPROTO_INET, nf_register_net_hook() briefly
installs the IPv4 hook before IPv6 registration fails. Packets
entering nft_do_chain() via the transient IPv4 hook can still be
dereferencing chain->blob_gen_X when the error path frees the
chain.
Add synchronize_rcu() between nft_chain_del() and the chain destroy
so that all RCU readers -- both dump threads and in-flight packet
evaluation -- have finished before the chain is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cached_fid bitfields to avoid shared-byte RMW races
is_open, has_lease and on_list are stored in the same bitfield byte in
struct cached_fid but are updated in different code paths that may run
concurrently. Bitfield assignments generate byte read–modify–write
operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can
restore stale values of the others.
A possible interleaving is:
CPU1: load old byte (has_lease=1, on_list=1)
CPU2: clear both flags (store 0)
CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits
To avoid this class of races, convert these flags to separate bool
fields. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add chann_lock to protect ksmbd_chann_list xarray
ksmbd_chann_list xarray lacks synchronization, allowing use-after-free in
multi-channel sessions (between lookup_chann_list() and ksmbd_chann_del).
Adds rw_semaphore chann_lock to struct ksmbd_session and protects
all xa_load/xa_store/xa_erase accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/mmcid: Don't assume CID is CPU owned on mode switch
Shinichiro reported a KASAN UAF, which is actually an out of bounds access
in the MMCID management code.
CPU0 CPU1
T1 runs in userspace
T0: fork(T4) -> Switch to per CPU CID mode
fixup() set MM_CID_TRANSIT on T1/CPU1
T4 exit()
T3 exit()
T2 exit()
T1 exit() switch to per task mode
---> Out of bounds access.
As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the
TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in
the task and drops the CID, but it does not touch the per CPU storage.
That's functionally correct because a CID is only owned by the CPU when
the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag.
Now sched_mm_cid_exit() assumes that the CID is CPU owned because the
prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the
not set ONCPU bit and then invokes clear_bit() with an insanely large
bit number because TRANSIT is set (bit 29).
Prevent that by actually validating that the CID is CPU owned in
mm_drop_cid_on_cpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix UAF issue for file-backed mounts w/ directio option
[ 9.269940][ T3222] Call trace:
[ 9.269948][ T3222] ext4_file_read_iter+0xac/0x108
[ 9.269979][ T3222] vfs_iocb_iter_read+0xac/0x198
[ 9.269993][ T3222] erofs_fileio_rq_submit+0x12c/0x180
[ 9.270008][ T3222] erofs_fileio_submit_bio+0x14/0x24
[ 9.270030][ T3222] z_erofs_runqueue+0x834/0x8ac
[ 9.270054][ T3222] z_erofs_read_folio+0x120/0x220
[ 9.270083][ T3222] filemap_read_folio+0x60/0x120
[ 9.270102][ T3222] filemap_fault+0xcac/0x1060
[ 9.270119][ T3222] do_pte_missing+0x2d8/0x1554
[ 9.270131][ T3222] handle_mm_fault+0x5ec/0x70c
[ 9.270142][ T3222] do_page_fault+0x178/0x88c
[ 9.270167][ T3222] do_translation_fault+0x38/0x54
[ 9.270183][ T3222] do_mem_abort+0x54/0xac
[ 9.270208][ T3222] el0_da+0x44/0x7c
[ 9.270227][ T3222] el0t_64_sync_handler+0x5c/0xf4
[ 9.270253][ T3222] el0t_64_sync+0x1bc/0x1c0
EROFS may encounter above panic when enabling file-backed mount w/
directio mount option, the root cause is it may suffer UAF in below
race condition:
- z_erofs_read_folio wq s_dio_done_wq
- z_erofs_runqueue
- erofs_fileio_submit_bio
- erofs_fileio_rq_submit
- vfs_iocb_iter_read
- ext4_file_read_iter
- ext4_dio_read_iter
- iomap_dio_rw
: bio was submitted and return -EIOCBQUEUED
- dio_aio_complete_work
- dio_complete
- dio->iocb->ki_complete (erofs_fileio_ki_complete())
- kfree(rq)
: it frees iocb, iocb.ki_filp can be UAF in file_accessed().
- file_accessed
: access NULL file point
Introduce a reference count in struct erofs_fileio_rq, and initialize it
as two, both erofs_fileio_ki_complete() and erofs_fileio_rq_submit() will
decrease reference count, the last one decreasing the reference count
to zero will free rq. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix UAF in xchk_btree_check_block_owner
We cannot dereference bs->cur when trying to determine if bs->cur
aliases bs->sc->sa.{bno,rmap}_cur after the latter has been freed.
Fix this by sampling before type before any freeing could happen.
The correct temporal ordering was broken when we removed xfs_btnum_t. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly
The existing allocation of scatterlists in omap_crypto_copy_sg_lists()
was allocating an array of scatterlist pointers, not scatterlist objects,
resulting in a 4x too small allocation.
Use sizeof(*new_sg) to get the correct object size. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: fix use-after-free in driver_override_show()
The driver_override_show() function reads the driver_override string
without holding the device_lock. However, driver_override_store() uses
driver_set_override(), which modifies and frees the string while holding
the device_lock.
This can result in a concurrent use-after-free if the string is freed
by the store function while being read by the show function.
Fix this by holding the device_lock around the read operation. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix bsg_done() causing double free
Kernel panic observed on system,
[5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000
[5353358.825194] #PF: supervisor write access in kernel mode
[5353358.825195] #PF: error_code(0x0002) - not-present page
[5353358.825196] PGD 100006067 P4D 0
[5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI
[5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1
[5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025
[5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10
[5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246
[5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000
[5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000
[5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000
[5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090
[5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000
[5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000
[5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0
[5353358.825221] PKRU: 55555554
[5353358.825222] Call Trace:
[5353358.825223] <TASK>
[5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825232] ? sg_copy_buffer+0xc8/0x110
[5353358.825236] ? __die_body.cold+0x8/0xd
[5353358.825238] ? page_fault_oops+0x134/0x170
[5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110
[5353358.825244] ? exc_page_fault+0xa8/0x150
[5353358.825247] ? asm_exc_page_fault+0x22/0x30
[5353358.825252] ? memcpy_erms+0x6/0x10
[5353358.825253] sg_copy_buffer+0xc8/0x110
[5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx]
[5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx]
Most routines in qla_bsg.c call bsg_done() only for success cases.
However a few invoke it for failure case as well leading to a double
free. Validate before calling bsg_done(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add
The driver does not set hw->sta_data_size, which causes mac80211 to
allocate insufficient space for driver private station data in
__sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of
struct rtl8xxxu_sta_info through sta->drv_priv, this results in a
slab-out-of-bounds write.
KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter:
BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346
Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12
Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during
probe, similar to how hw->vif_data_size is configured. This ensures
mac80211 allocates sufficient space for the driver's per-station
private data.
Tested on StarFive VisionFive 2 v1.2A board. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: iaa - Fix out-of-bounds index in find_empty_iaa_compression_mode
The local variable 'i' is initialized with -EINVAL, but the for loop
immediately overwrites it and -EINVAL is never returned.
If no empty compression mode can be found, the function would return the
out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid
array access in add_iaa_compression_mode().
Fix both issues by returning either a valid index or -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0). |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix unlikely race in gdlm_put_lock
In gdlm_put_lock(), there is a small window of time in which the
DFL_UNMOUNT flag has been set but the lockspace hasn't been released,
yet. In that window, dlm may still call gdlm_ast() and gdlm_bast().
To prevent it from dereferencing freed glock objects, only free the
glock if the lockspace has actually been released. |
| In the Linux kernel, the following vulnerability has been resolved:
fork: defer linking file vma until vma is fully initialized
Thorvald reported a WARNING [1]. And the root cause is below race:
CPU 1 CPU 2
fork hugetlbfs_fallocate
dup_mmap hugetlbfs_punch_hole
i_mmap_lock_write(mapping);
vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree.
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem!
i_mmap_lock_write(mapping);
hugetlb_vmdelete_list
vma_interval_tree_foreach
hugetlb_vma_trylock_write -- Vma_lock is cleared.
tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem!
hugetlb_vma_unlock_write -- Vma_lock is assigned!!!
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside
i_mmap_rwsem lock while vma lock can be used in the same time. Fix this
by deferring linking file vma until vma is fully initialized. Those vmas
should be initialized first before they can be used. |
| Flatpak is a Linux application sandboxing and distribution framework. Prior to 1.16.4, the Flatpak portal accepts paths in the sandbox-expose options which can be app-controlled symlinks pointing at arbitrary paths. Flatpak run mounts the resolved host path in the sandbox. This gives apps access to all host files and can be used as a primitive to gain code execution in the host context. This vulnerability is fixed in 1.16.4. |
| Improper authentication in Azure SRE Agent allows an unauthorized attacker to disclose information over a network. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on BSD and Solaris platforms. This vulnerability is fixed in 1.43.0. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.12, a path traversal issue in toSSG() allows files to be written outside the configured output directory during static site generation. When using dynamic route parameters via ssgParams, specially crafted values can cause generated file paths to escape the intended output directory. This vulnerability is fixed in 4.12.12. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.1 and 6.5.4, unauthenticated remote attackers were able to access the getting started endpoint to get access to sensitive internal entity data, even after the system setup was completed. This vulnerability is fixed in 7.0.1 and 6.5.4. |
