| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Harden userspace-supplied xdp_desc validation
Turned out certain clearly invalid values passed in xdp_desc from
userspace can pass xp_{,un}aligned_validate_desc() and then lead
to UBs or just invalid frames to be queued for xmit.
desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_len
can cause positive integer overflow and wraparound, the same way low
enough desc->addr with a non-zero pool->tx_metadata_len can cause
negative integer overflow. Both scenarios can then pass the
validation successfully.
This doesn't happen with valid XSk applications, but can be used
to perform attacks.
Always promote desc->len to ``u64`` first to exclude positive
overflows of it. Use explicit check_{add,sub}_overflow() when
validating desc->addr (which is ``u64`` already).
bloat-o-meter reports a little growth of the code size:
add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44)
Function old new delta
xskq_cons_peek_desc 299 330 +31
xsk_tx_peek_release_desc_batch 973 1002 +29
xsk_generic_xmit 3148 3132 -16
but hopefully this doesn't hurt the performance much. |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
The usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit()
path is very broken.
sys_prlimit64() does get_task_struct(tsk) but this only protects task_struct
itself. If tsk != current and tsk is not a leader, this process can exit/exec
and task_lock(tsk->group_leader) may use the already freed task_struct.
Another problem is that sys_prlimit64() can race with mt-exec which changes
->group_leader. In this case do_prlimit() may take the wrong lock, or (worse)
->group_leader may change between task_lock() and task_unlock().
Change sys_prlimit64() to take tasklist_lock when necessary. This is not
nice, but I don't see a better fix for -stable. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_objref: validate objref and objrefmap expressions
Referencing a synproxy stateful object from OUTPUT hook causes kernel
crash due to infinite recursive calls:
BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12)
[...]
Call Trace:
__find_rr_leaf+0x99/0x230
fib6_table_lookup+0x13b/0x2d0
ip6_pol_route+0xa4/0x400
fib6_rule_lookup+0x156/0x240
ip6_route_output_flags+0xc6/0x150
__nf_ip6_route+0x23/0x50
synproxy_send_tcp_ipv6+0x106/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
nft_synproxy_do_eval+0x263/0x310
nft_do_chain+0x5a8/0x5f0 [nf_tables
nft_do_chain_inet+0x98/0x110
nf_hook_slow+0x43/0xc0
__ip6_local_out+0xf0/0x170
ip6_local_out+0x17/0x70
synproxy_send_tcp_ipv6+0x1a2/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
[...]
Implement objref and objrefmap expression validate functions.
Currently, only NFT_OBJECT_SYNPROXY object type requires validation.
This will also handle a jump to a chain using a synproxy object from the
OUTPUT hook.
Now when trying to reference a synproxy object in the OUTPUT hook, nft
will produce the following error:
synproxy_crash.nft: Error: Could not process rule: Operation not supported
synproxy name mysynproxy
^^^^^^^^^^^^^^^^^^^^^^^^ |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix softlockup in ftrace_module_enable
A soft lockup was observed when loading amdgpu module.
If a module has a lot of tracable functions, multiple calls
to kallsyms_lookup can spend too much time in RCU critical
section and with disabled preemption, causing kernel panic.
This is the same issue that was fixed in
commit d0b24b4e91fc ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY
kernels") and commit 42ea22e754ba ("ftrace: Add cond_resched() to
ftrace_graph_set_hash()").
Fix it the same way by adding cond_resched() in ftrace_module_enable. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: clear extent cache after moving/defragmenting extents
The extent map cache can become stale when extents are moved or
defragmented, causing subsequent operations to see outdated extent flags.
This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().
The problem occurs when:
1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED
2. ioctl(FITRIM) triggers ocfs2_move_extents()
3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)
4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent()
which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)
5. The extent map cache is not invalidated after the move
6. Later write() operations read stale cached flags (0x2) but disk has
updated flags (0x0), causing a mismatch
7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers
Fix by clearing the extent map cache after each extent move/defrag
operation in __ocfs2_move_extents_range(). This ensures subsequent
operations read fresh extent data from disk. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
If fs_info->super_copy or fs_info->super_for_commit allocated failed in
btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info().
Otherwise btrfs_check_leaked_roots() would access NULL pointer because
fs_info->allocated_roots had not been initialised.
syzkaller reported the following information:
------------[ cut here ]------------
BUG: unable to handle page fault for address: fffffffffffffbb0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...)
RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline]
RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline]
RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline]
RIP: 0010:refcount_read include/linux/refcount.h:170 [inline]
RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230
[...]
Call Trace:
<TASK>
btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280
btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029
btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097
vfs_get_tree+0x98/0x320 fs/super.c:1759
do_new_mount+0x357/0x660 fs/namespace.c:3899
path_mount+0x716/0x19c0 fs/namespace.c:4226
do_mount fs/namespace.c:4239 [inline]
__do_sys_mount fs/namespace.c:4450 [inline]
__se_sys_mount fs/namespace.c:4427 [inline]
__x64_sys_mount+0x28c/0x310 fs/namespace.c:4427
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f032eaffa8d
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix improper check of dentry.stream.valid_size
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix NULL pointer dereference in VRAM logic for APU devices
Previously, APU platforms (and other scenarios with uninitialized VRAM managers)
triggered a NULL pointer dereference in `ttm_resource_manager_usage()`. The root
cause is not that the `struct ttm_resource_manager *man` pointer itself is NULL,
but that `man->bdev` (the backing device pointer within the manager) remains
uninitialized (NULL) on APUs—since APUs lack dedicated VRAM and do not fully
set up VRAM manager structures. When `ttm_resource_manager_usage()` attempts to
acquire `man->bdev->lru_lock`, it dereferences the NULL `man->bdev`, leading to
a kernel OOPS.
1. **amdgpu_cs.c**: Extend the existing bandwidth control check in
`amdgpu_cs_get_threshold_for_moves()` to include a check for
`ttm_resource_manager_used()`. If the manager is not used (uninitialized
`bdev`), return 0 for migration thresholds immediately—skipping VRAM-specific
logic that would trigger the NULL dereference.
2. **amdgpu_kms.c**: Update the `AMDGPU_INFO_VRAM_USAGE` ioctl and memory info
reporting to use a conditional: if the manager is used, return the real VRAM
usage; otherwise, return 0. This avoids accessing `man->bdev` when it is
NULL.
3. **amdgpu_virt.c**: Modify the vf2pf (virtual function to physical function)
data write path. Use `ttm_resource_manager_used()` to check validity: if the
manager is usable, calculate `fb_usage` from VRAM usage; otherwise, set
`fb_usage` to 0 (APUs have no discrete framebuffer to report).
This approach is more robust than APU-specific checks because it:
- Works for all scenarios where the VRAM manager is uninitialized (not just APUs),
- Aligns with TTM's design by using its native helper function,
- Preserves correct behavior for discrete GPUs (which have fully initialized
`man->bdev` and pass the `ttm_resource_manager_used()` check).
v4: use ttm_resource_manager_used(&adev->mman.vram_mgr.manager) instead of checking the adev->gmc.is_app_apu flag (Christian) |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: cadence: Check for the existence of cdns_pcie::ops before using it
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.
Hence, add a check to prevent NULL pointer dereference.
[mani: reworded subject and description] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: ensure no dirty metadata is written back for an fs with errors
[BUG]
During development of a minor feature (make sure all btrfs_bio::end_io()
is called in task context), I noticed a crash in generic/388, where
metadata writes triggered new works after btrfs_stop_all_workers().
It turns out that it can even happen without any code modification, just
using RAID5 for metadata and the same workload from generic/388 is going
to trigger the use-after-free.
[CAUSE]
If btrfs hits an error, the fs is marked as error, no new
transaction is allowed thus metadata is in a frozen state.
But there are some metadata modifications before that error, and they are
still in the btree inode page cache.
Since there will be no real transaction commit, all those dirty folios
are just kept as is in the page cache, and they can not be invalidated
by invalidate_inode_pages2() call inside close_ctree(), because they are
dirty.
And finally after btrfs_stop_all_workers(), we call iput() on btree
inode, which triggers writeback of those dirty metadata.
And if the fs is using RAID56 metadata, this will trigger RMW and queue
new works into rmw_workers, which is already stopped, causing warning
from queue_work() and use-after-free.
[FIX]
Add a special handling for write_one_eb(), that if the fs is already in
an error state, immediately mark the bbio as failure, instead of really
submitting them.
Then during close_ctree(), iput() will just discard all those dirty
tree blocks without really writing them back, thus no more new jobs for
already stopped-and-freed workqueues.
The extra discard in write_one_eb() also acts as an extra safenet.
E.g. the transaction abort is triggered by some extent/free space
tree corruptions, and since extent/free space tree is already corrupted
some tree blocks may be allocated where they shouldn't be (overwriting
existing tree blocks). In that case writing them back will further
corrupting the fs. |
| In the Linux kernel, the following vulnerability has been resolved:
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
There is race in amdgpu_amdkfd_device_fini_sw and interrupt.
if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and
kfree(kfd), and KGD interrupt generated.
kernel panic log:
BUG: kernel NULL pointer dereference, address: 0000000000000098
amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP
PGD d78c68067 P4D d78c68067
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
PUD 1465b8067 PMD @
Oops: @002 [#1] SMP NOPTI
kfd kfd: amdgpu: Total number of KFD nodes to be created: 4
CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K
RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40
Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc
89 c6 e8 07 38 5d
RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018
0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098
ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020
0000000000000000 R11: 0000000000000000 R12: 0900000000000002
ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00
CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033
CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0
0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu]
? amdgpu_fence_process+0xa4/0x150 [amdgpu]
kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace
amdgpu_irq_dispatch+0x165/0x210 [amdgpu]
amdgpu_ih_process+0x80/0x100 [amdgpu]
amdgpu: Virtual CRAT table created for GPU
amdgpu_irq_handler+0x1f/@x60 [amdgpu]
__handle_irq_event_percpu+0x3d/0x170
amdgpu: Topology: Add dGPU node [0x74a2:0x1002]
handle_irq_event+0x5a/@xcO
handle_edge_irq+0x93/0x240
kfd kfd: amdgpu: KFD node 1 partition @ size 49148M
asm_call_irq_on_stack+0xf/@x20
</IRQ>
common_interrupt+0xb3/0x130
asm_common_interrupt+0x1le/0x40
5.10.134-010.a1i5000.a18.x86_64 #1 |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: slimbus: fix bus_context pointer in regmap init calls
Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:
Unable to handle kernel paging request at virtual address ffff8000847cbad4
...
CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
Hardware name: Thundercomm Dragonboard 845c (DT)
...
Call trace:
slim_xfer_msg+0x24/0x1ac [slimbus] (P)
slim_read+0x48/0x74 [slimbus]
regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
_regmap_raw_read+0xe8/0x174
_regmap_bus_read+0x44/0x80
_regmap_read+0x60/0xd8
_regmap_update_bits+0xf4/0x140
_regmap_select_page+0xa8/0x124
_regmap_raw_write_impl+0x3b8/0x65c
_regmap_bus_raw_write+0x60/0x80
_regmap_write+0x58/0xc0
regmap_write+0x4c/0x80
wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
__soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
snd_pcm_hw_params+0x124/0x464 [snd_pcm]
snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
snd_pcm_ioctl+0x34/0x4c [snd_pcm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xf0
el0t_64_sync+0x198/0x19c
The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.
While at this, also correct the same argument in __regmap_init_slimbus(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential cfid UAF in smb2_query_info_compound
When smb2_query_info_compound() retries, a previously allocated cfid may
have been freed in the first attempt.
Because cfid wasn't reset on replay, later cleanup could act on a stale
pointer, leading to a potential use-after-free.
Reinitialize cfid to NULL under the replay label.
Example trace (trimmed):
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110
[...]
RIP: 0010:refcount_warn_saturate+0x9c/0x110
[...]
Call Trace:
<TASK>
smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? step_into+0x10d/0x690
? __legitimize_path+0x28/0x60
smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? kmem_cache_alloc+0x18a/0x340
? getname_flags+0x46/0x1e0
cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
statfs_by_dentry+0x67/0x90
vfs_statfs+0x16/0xd0
user_statfs+0x54/0xa0
__do_sys_statfs+0x20/0x50
do_syscall_64+0x58/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: Correctly handle Rx checksum offload errors
The stmmac_rx function would previously set skb->ip_summed to
CHECKSUM_UNNECESSARY if hardware checksum offload (CoE) was enabled
and the packet was of a known IP ethertype.
However, this logic failed to check if the hardware had actually
reported a checksum error. The hardware status, indicating a header or
payload checksum failure, was being ignored at this stage. This could
cause corrupt packets to be passed up the network stack as valid.
This patch corrects the logic by checking the `csum_none` status flag,
which is set when the hardware reports a checksum error. If this flag
is set, skb->ip_summed is now correctly set to CHECKSUM_NONE,
ensuring the kernel's network stack will perform its own validation and
properly handle the corrupt packet. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix the deadlock of enetc_mdio_lock
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Ensure XFD state on signal delivery
Sean reported [1] the following splat when running KVM tests:
WARNING: CPU: 232 PID: 15391 at xfd_validate_state+0x65/0x70
Call Trace:
<TASK>
fpu__clear_user_states+0x9c/0x100
arch_do_signal_or_restart+0x142/0x210
exit_to_user_mode_loop+0x55/0x100
do_syscall_64+0x205/0x2c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Chao further identified [2] a reproducible scenario involving signal
delivery: a non-AMX task is preempted by an AMX-enabled task which
modifies the XFD MSR.
When the non-AMX task resumes and reloads XSTATE with init values,
a warning is triggered due to a mismatch between fpstate::xfd and the
CPU's current XFD state. fpu__clear_user_states() does not currently
re-synchronize the XFD state after such preemption.
Invoke xfd_update_state() which detects and corrects the mismatch if
there is a dynamic feature.
This also benefits the sigreturn path, as fpu__restore_sig() may call
fpu__clear_user_states() when the sigframe is inaccessible.
[ dhansen: minor changelog munging ] |
| In the Linux kernel, the following vulnerability has been resolved:
ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
} |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Disable AFBC support on Mediatek DRM driver
Commit c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM
driver") added AFBC support to Mediatek DRM and enabled the
32x8/split/sparse modifier.
However, this is currently broken on Mediatek MT8188 (Genio 700 EVK
platform); tested using upstream Kernel and Mesa (v25.2.1), AFBC is used by
default since Mesa v25.0.
Kernel trace reports vblank timeouts constantly, and the render is garbled:
```
[CRTC:62:crtc-0] vblank wait timed out
WARNING: CPU: 7 PID: 70 at drivers/gpu/drm/drm_atomic_helper.c:1835 drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
[...]
Hardware name: MediaTek Genio-700 EVK (DT)
Workqueue: events_unbound commit_work
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
lr : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
sp : ffff80008337bca0
x29: ffff80008337bcd0 x28: 0000000000000061 x27: 0000000000000000
x26: 0000000000000001 x25: 0000000000000000 x24: ffff0000c9dcc000
x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c66f2f80
x20: ffff0000c0d7d880 x19: 0000000000000000 x18: 000000000000000a
x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000
x14: 0000000000000000 x13: 74756f2064656d69 x12: 742074696177206b
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082396a70
x8 : 0000000000057fa8 x7 : 0000000000000cce x6 : ffff8000823eea70
x5 : ffff0001fef5f408 x4 : ffff80017ccee000 x3 : ffff0000c12cb480
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c12cb480
Call trace:
drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c (P)
drm_atomic_helper_commit_tail_rpm+0x64/0x80
commit_tail+0xa4/0x1a4
commit_work+0x14/0x20
process_one_work+0x150/0x290
worker_thread+0x2d0/0x3ec
kthread+0x12c/0x210
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
```
Until this gets fixed upstream, disable AFBC support on this platform, as
it's currently broken with upstream Mesa. |
| In the Linux kernel, the following vulnerability has been resolved:
crash: fix crashkernel resource shrink
When crashkernel is configured with a high reservation, shrinking its
value below the low crashkernel reservation causes two issues:
1. Invalid crashkernel resource objects
2. Kernel crash if crashkernel shrinking is done twice
For example, with crashkernel=200M,high, the kernel reserves 200MB of high
memory and some default low memory (say 256MB). The reservation appears
as:
cat /proc/iomem | grep -i crash
af000000-beffffff : Crash kernel
433000000-43f7fffff : Crash kernel
If crashkernel is then shrunk to 50MB (echo 52428800 >
/sys/kernel/kexec_crash_size), /proc/iomem still shows 256MB reserved:
af000000-beffffff : Crash kernel
Instead, it should show 50MB:
af000000-b21fffff : Crash kernel
Further shrinking crashkernel to 40MB causes a kernel crash with the
following trace (x86):
BUG: kernel NULL pointer dereference, address: 0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
<snip...>
Call Trace: <TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? __release_resource+0xd/0xb0
release_resource+0x26/0x40
__crash_shrink_memory+0xe5/0x110
crash_shrink_memory+0x12a/0x190
kexec_crash_size_store+0x41/0x80
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x294/0x460
ksys_write+0x6d/0xf0
<snip...>
This happens because __crash_shrink_memory()/kernel/crash_core.c
incorrectly updates the crashk_res resource object even when
crashk_low_res should be updated.
Fix this by ensuring the correct crashkernel resource object is updated
when shrinking crashkernel memory. |
