| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: make j1939_session_activate() fail if device is no longer registered
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit 93a27b5891b8 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.
Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: remove spin_lock() in rust_shrink_free_page()
When forward-porting Rust Binder to 6.18, I neglected to take commit
fb56fdf8b9a2 ("mm/list_lru: split the lock to per-cgroup scope") into
account, and apparently I did not end up running the shrinker callback
when I sanity tested the driver before submission. This leads to crashes
like the following:
============================================
WARNING: possible recursive locking detected
6.18.0-mainline-maybe-dirty #1 Tainted: G IO
--------------------------------------------
kswapd0/68 is trying to acquire lock:
ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: lock_list_lru_of_memcg+0x128/0x230
but task is already holding lock:
ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&l->lock);
lock(&l->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kswapd0/68:
#0: ffffffff90d2e260 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x597/0x1160
#1: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20
#2: ffffffff90cf3680 (rcu_read_lock){....}-{1:2}, at: lock_list_lru_of_memcg+0x2d/0x230
To fix this, remove the spin_lock() call from rust_shrink_free_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: exynos-clkout: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuset: fix warning when disabling remote partition
A warning was triggered as follows:
WARNING: kernel/cgroup/cpuset.c:1651 at remote_partition_disable+0xf7/0x110
RIP: 0010:remote_partition_disable+0xf7/0x110
RSP: 0018:ffffc90001947d88 EFLAGS: 00000206
RAX: 0000000000007fff RBX: ffff888103b6e000 RCX: 0000000000006f40
RDX: 0000000000006f00 RSI: ffffc90001947da8 RDI: ffff888103b6e000
RBP: ffff888103b6e000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88810b2e2728 R12: ffffc90001947da8
R13: 0000000000000000 R14: ffffc90001947da8 R15: ffff8881081f1c00
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f55c8bbe0b2 CR3: 000000010b14c000 CR4: 00000000000006f0
Call Trace:
<TASK>
update_prstate+0x2d3/0x580
cpuset_partition_write+0x94/0xf0
kernfs_fop_write_iter+0x147/0x200
vfs_write+0x35d/0x500
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f55c8cd4887
Reproduction steps (on a 16-CPU machine):
# cd /sys/fs/cgroup/
# mkdir A1
# echo +cpuset > A1/cgroup.subtree_control
# echo "0-14" > A1/cpuset.cpus.exclusive
# mkdir A1/A2
# echo "0-14" > A1/A2/cpuset.cpus.exclusive
# echo "root" > A1/A2/cpuset.cpus.partition
# echo 0 > /sys/devices/system/cpu/cpu15/online
# echo member > A1/A2/cpuset.cpus.partition
When CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUs
remain available for the top_cpuset, forcing partitions to share CPUs with
the top_cpuset. In this scenario, disabling the remote partition triggers
a warning stating that effective_xcpus is not a subset of
subpartitions_cpus. Partitions should be invalidated in this case to
inform users that the partition is now invalid(cpus are shared with
top_cpuset).
To fix this issue:
1. Only emit the warning only if subpartitions_cpus is not empty and the
effective_xcpus is not a subset of subpartitions_cpus.
2. During the CPU hotplug process, invalidate partitions if
subpartitions_cpus is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tilcdc: Fix removal actions in case of failed probe
The drm_kms_helper_poll_fini() and drm_atomic_helper_shutdown() helpers
should only be called when the device has been successfully registered.
Currently, these functions are called unconditionally in tilcdc_fini(),
which causes warnings during probe deferral scenarios.
[ 7.972317] WARNING: CPU: 0 PID: 23 at drivers/gpu/drm/drm_atomic_state_helper.c:175 drm_atomic_helper_crtc_duplicate_state+0x60/0x68
...
[ 8.005820] drm_atomic_helper_crtc_duplicate_state from drm_atomic_get_crtc_state+0x68/0x108
[ 8.005858] drm_atomic_get_crtc_state from drm_atomic_helper_disable_all+0x90/0x1c8
[ 8.005885] drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x90/0x144
[ 8.005911] drm_atomic_helper_shutdown from tilcdc_fini+0x68/0xf8 [tilcdc]
[ 8.005957] tilcdc_fini [tilcdc] from tilcdc_pdev_probe+0xb0/0x6d4 [tilcdc]
Fix this by rewriting the failed probe cleanup path using the standard
goto error handling pattern, which ensures that cleanup functions are
only called on successfully initialized resources. Additionally, remove
the now-unnecessary is_registered flag. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Use spinlock for context list protection lock
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/kexec: fix IMA when allocation happens in CMA area
*** Bug description ***
When I tested kexec with the latest kernel, I ran into the following warning:
[ 40.712410] ------------[ cut here ]------------
[ 40.712576] WARNING: CPU: 2 PID: 1562 at kernel/kexec_core.c:1001 kimage_map_segment+0x144/0x198
[...]
[ 40.816047] Call trace:
[ 40.818498] kimage_map_segment+0x144/0x198 (P)
[ 40.823221] ima_kexec_post_load+0x58/0xc0
[ 40.827246] __do_sys_kexec_file_load+0x29c/0x368
[...]
[ 40.855423] ---[ end trace 0000000000000000 ]---
*** How to reproduce ***
This bug is only triggered when the kexec target address is allocated in
the CMA area. If no CMA area is reserved in the kernel, use the "cma="
option in the kernel command line to reserve one.
*** Root cause ***
The commit 07d24902977e ("kexec: enable CMA based contiguous
allocation") allocates the kexec target address directly on the CMA area
to avoid copying during the jump. In this case, there is no IND_SOURCE
for the kexec segment. But the current implementation of
kimage_map_segment() assumes that IND_SOURCE pages exist and map them
into a contiguous virtual address by vmap().
*** Solution ***
If IMA segment is allocated in the CMA area, use its page_address()
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Add missing NULL pointer check for pingpong interface
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Patchwork: https://patchwork.freedesktop.org/patch/693860/ |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"
This patch ensures that the RX ring size (rx_pending) is not
set below the permitted length. This avoids UBSAN
shift-out-of-bounds errors when users passes small or zero
ring sizes via ethtool -G. |
| In the Linux kernel, the following vulnerability has been resolved:
media: adv7842: Avoid possible out-of-bounds array accesses in adv7842_cp_log_status()
It's possible for cp_read() and hdmi_read() to return -EIO. Those
values are further used as indexes for accessing arrays.
Fix that by checking return values where it's needed.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt()
The variable mddev->private is first assigned to conf and then checked:
conf = mddev->private;
if (!conf) ...
If conf is NULL, then mddev->private is also NULL. In this case,
null-pointer dereferences can occur when calling raid5_quiesce():
raid5_quiesce(mddev, true);
raid5_quiesce(mddev, false);
since mddev->private is assigned to conf again in raid5_quiesce(), and conf
is dereferenced in several places, for example:
conf->quiesce = 0;
wake_up(&conf->wait_for_quiescent);
To fix this issue, the function should unlock mddev and return before
invoking raid5_quiesce() when conf is NULL, following the existing pattern
in raid5_change_consistency_policy(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: change all pageblocks migrate type on coalescing
When a page is freed it coalesces with a buddy into a higher order page
while possible. When the buddy page migrate type differs, it is expected
to be updated to match the one of the page being freed.
However, only the first pageblock of the buddy page is updated, while the
rest of the pageblocks are left unchanged.
That causes warnings in later expand() and other code paths (like below),
since an inconsistency between migration type of the list containing the
page and the page-owned pageblocks migration types is introduced.
[ 308.986589] ------------[ cut here ]------------
[ 308.987227] page type is 0, passed migratetype is 1 (nr=256)
[ 308.987275] WARNING: CPU: 1 PID: 5224 at mm/page_alloc.c:812 expand+0x23c/0x270
[ 308.987293] Modules linked in: algif_hash(E) af_alg(E) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) s390_trng(E) vfio_ccw(E) mdev(E) vfio_iommu_type1(E) vfio(E) sch_fq_codel(E) drm(E) i2c_core(E) drm_panel_orientation_quirks(E) loop(E) nfnetlink(E) vsock_loopback(E) vmw_vsock_virtio_transport_common(E) vsock(E) ctcm(E) fsm(E) diag288_wdt(E) watchdog(E) zfcp(E) scsi_transport_fc(E) ghash_s390(E) prng(E) aes_s390(E) des_generic(E) des_s390(E) libdes(E) sha3_512_s390(E) sha3_256_s390(E) sha_common(E) paes_s390(E) crypto_engine(E) pkey_cca(E) pkey_ep11(E) zcrypt(E) rng_core(E) pkey_pckmo(E) pkey(E) autofs4(E)
[ 308.987439] Unloaded tainted modules: hmac_s390(E):2
[ 308.987650] CPU: 1 UID: 0 PID: 5224 Comm: mempig_verify Kdump: loaded Tainted: G E 6.18.0-gcc-bpf-debug #431 PREEMPT
[ 308.987657] Tainted: [E]=UNSIGNED_MODULE
[ 308.987661] Hardware name: IBM 3906 M04 704 (z/VM 7.3.0)
[ 308.987666] Krnl PSW : 0404f00180000000 00000349976fa600 (expand+0x240/0x270)
[ 308.987676] R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 308.987682] Krnl GPRS: 0000034980000004 0000000000000005 0000000000000030 000003499a0e6d88
[ 308.987688] 0000000000000005 0000034980000005 000002be803ac000 0000023efe6c8300
[ 308.987692] 0000000000000008 0000034998d57290 000002be00000100 0000023e00000008
[ 308.987696] 0000000000000000 0000000000000000 00000349976fa5fc 000002c99b1eb6f0
[ 308.987708] Krnl Code: 00000349976fa5f0: c020008a02f2 larl %r2,000003499883abd4
00000349976fa5f6: c0e5ffe3f4b5 brasl %r14,0000034997378f60
#00000349976fa5fc: af000000 mc 0,0
>00000349976fa600: a7f4ff4c brc 15,00000349976fa498
00000349976fa604: b9040026 lgr %r2,%r6
00000349976fa608: c0300088317f larl %r3,0000034998800906
00000349976fa60e: c0e5fffdb6e1 brasl %r14,00000349976b13d0
00000349976fa614: af000000 mc 0,0
[ 308.987734] Call Trace:
[ 308.987738] [<00000349976fa600>] expand+0x240/0x270
[ 308.987744] ([<00000349976fa5fc>] expand+0x23c/0x270)
[ 308.987749] [<00000349976ff95e>] rmqueue_bulk+0x71e/0x940
[ 308.987754] [<00000349976ffd7e>] __rmqueue_pcplist+0x1fe/0x2a0
[ 308.987759] [<0000034997700966>] rmqueue.isra.0+0xb46/0xf40
[ 308.987763] [<0000034997703ec8>] get_page_from_freelist+0x198/0x8d0
[ 308.987768] [<0000034997706fa8>] __alloc_frozen_pages_noprof+0x198/0x400
[ 308.987774] [<00000349977536f8>] alloc_pages_mpol+0xb8/0x220
[ 308.987781] [<0000034997753bf6>] folio_alloc_mpol_noprof+0x26/0xc0
[ 308.987786] [<0000034997753e4c>] vma_alloc_folio_noprof+0x6c/0xa0
[ 308.987791] [<0000034997775b22>] vma_alloc_anon_folio_pmd+0x42/0x240
[ 308.987799] [<000003499777bfea>] __do_huge_pmd_anonymous_page+0x3a/0x210
[ 308.987804] [<00000349976cb0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: avoid invalid read in irdma_net_event
irdma_net_event() should not dereference anything from "neigh" (alias
"ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE.
Other events come with different structures pointed to by "ptr" and they
may be smaller than struct neighbour.
Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case.
The bug is mostly harmless, but it triggers KASAN on debug kernels:
BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma]
Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554
CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1
Hardware name: [...]
Workqueue: events rt6_probe_deferred
Call Trace:
<IRQ>
dump_stack_lvl+0x60/0xb0
print_address_description.constprop.0+0x2c/0x3f0
print_report+0xb4/0x270
kasan_report+0x92/0xc0
irdma_net_event+0x32e/0x3b0 [irdma]
notifier_call_chain+0x9e/0x180
atomic_notifier_call_chain+0x5c/0x110
rt6_do_redirect+0xb91/0x1080
tcp_v6_err+0xe9b/0x13e0
icmpv6_notify+0x2b2/0x630
ndisc_redirect_rcv+0x328/0x530
icmpv6_rcv+0xc16/0x1360
ip6_protocol_deliver_rcu+0xb84/0x12e0
ip6_input_finish+0x117/0x240
ip6_input+0xc4/0x370
ipv6_rcv+0x420/0x7d0
__netif_receive_skb_one_core+0x118/0x1b0
process_backlog+0xd1/0x5d0
__napi_poll.constprop.0+0xa3/0x440
net_rx_action+0x78a/0xba0
handle_softirqs+0x2d4/0x9c0
do_softirq+0xad/0xe0
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
smc91x: fix broken irq-context in PREEMPT_RT
When smc91x.c is built with PREEMPT_RT, the following splat occurs
in FVP_RevC:
[ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106]
[ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work
[ 13.062266] C
** replaying previous printk message **
[ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)}
[ 13.062353] Hardware name: , BIOS
[ 13.062382] Workqueue: mld mld_ifc_work
[ 13.062469] Call trace:
[ 13.062494] show_stack+0x24/0x40 (C)
[ 13.062602] __dump_stack+0x28/0x48
[ 13.062710] dump_stack_lvl+0x7c/0xb0
[ 13.062818] dump_stack+0x18/0x34
[ 13.062926] process_scheduled_works+0x294/0x450
[ 13.063043] worker_thread+0x260/0x3d8
[ 13.063124] kthread+0x1c4/0x228
[ 13.063235] ret_from_fork+0x10/0x20
This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT,
but smc_special_unlock() does not restore IRQs on PREEMPT_RT.
The reason is that smc_special_unlock() calls spin_unlock_irqrestore(),
and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke
rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero.
To address this issue, replace smc_special_trylock() with spin_trylock_irqsave(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Zero-initialize the eb.vma array in i915_gem_do_execbuffer
Initialize the eb.vma array with values of 0 when the eb structure is
first set up. In particular, this sets the eb->vma[i].vma pointers to
NULL, simplifying cleanup and getting rid of the bug described below.
During the execution of eb_lookup_vmas(), the eb->vma array is
successively filled up with struct eb_vma objects. This process includes
calling eb_add_vma(), which might fail; however, even in the event of
failure, eb->vma[i].vma is set for the currently processed buffer.
If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which
prompts a call to eb_release_vmas() to clean up the mess. Since
eb_lookup_vmas() might fail during processing any (possibly not first)
buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know
at what point did the lookup function fail.
In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper
function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is
set to NULL in case i915_gem_object_userptr_submit_init() fails; the
current one needs to be cleaned up by eb_release_vmas() at this point,
so the next one is set. If eb_add_vma() fails, neither the current nor
the next vma is set to NULL, which is a source of a NULL deref bug
described in the issue linked in the Closes tag.
When entering eb_lookup_vmas(), the vma pointers are set to the slab
poison value, instead of NULL. This doesn't matter for the actual
lookup, since it gets overwritten anyway, however the eb_release_vmas()
function only recognizes NULL as the stopping value, hence the pointers
are being set to NULL as they go in case of intermediate failure. This
patch changes the approach to filling them all with NULL at the start
instead, rather than handling that manually during failure.
(cherry picked from commit 08889b706d4f0b8d2352b7ca29c2d8df4d0787cd) |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Sign extend kfunc call arguments
The kfunc calls are native calls so they should follow LoongArch calling
conventions. Sign extend its arguments properly to avoid kernel panic.
This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()
helper performs extension in place meaning a value already store in the
target register (Note: this is different from the existing sign_extend()
helper and thus we can't reuse it). |
| In the Linux kernel, the following vulnerability has been resolved:
erspan: Initialize options_len before referencing options.
The struct ip_tunnel_info has a flexible array member named
options that is protected by a counted_by(options_len)
attribute.
The compiler will use this information to enforce runtime bounds
checking deployed by FORTIFY_SOURCE string helpers.
As laid out in the GCC documentation, the counter must be
initialized before the first reference to the flexible array
member.
After scanning through the files that use struct ip_tunnel_info
and also refer to options or options_len, it appears the normal
case is to use the ip_tunnel_info_opts_set() helper.
Said helper would initialize options_len properly before copying
data into options, however in the GRE ERSPAN code a partial
update is done, preventing the use of the helper function.
Before this change the handling of ERSPAN traffic in GRE tunnels
would cause a kernel panic when the kernel is compiled with
GCC 15+ and having FORTIFY_SOURCE configured:
memcpy: detected buffer overflow: 4 byte write of buffer size 0
Call Trace:
<IRQ>
__fortify_panic+0xd/0xf
erspan_rcv.cold+0x68/0x83
? ip_route_input_slow+0x816/0x9d0
gre_rcv+0x1b2/0x1c0
gre_rcv+0x8e/0x100
? raw_v4_input+0x2a0/0x2b0
ip_protocol_deliver_rcu+0x1ea/0x210
ip_local_deliver_finish+0x86/0x110
ip_local_deliver+0x65/0x110
? ip_rcv_finish_core+0xd6/0x360
ip_rcv+0x186/0x1a0
Reported-at: https://launchpad.net/bugs/2129580 |
