| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| D-Link DI-8300 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| D-Link DI-8300 v16.07.26A1 was discovered to contain a buffer overflow via the fx parameter in the jingx_asp function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the iface parameter in the /wan_line_detection.asp endpoint. |
| A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the s parameter in the /web_list_opt.asp endpoint. |
| A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 and DI-8003G 19.12.10A1 due to improper handling of the wan_ping parameter in the /wan_ping.asp endpoint. |
| A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of parameters in the /xwgl_bwr.asp endpoint. An attacker can exploit this vulnerability by sending a crafted HTTP GET request in the name, qq, and time parameters. |
| A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of parameters in the /yyxz_dlink.asp endpoint. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Transient DOS when receiving a service data frame with excessive length during device matching over a neighborhood awareness network protocol connection. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION
Use sb->s_uuid for a proper volume identifier as the primary choice.
For filesystems that do not provide a UUID, fall back to stfs.f_fsid
obtained from vfs_statfs(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix out-of-bounds memset in command slot handling
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Prevent ubuf size overflow
The ubuf size calculation may overflow, resulting in an undersized
allocation and possible memory corruption.
Use check_add_overflow() helpers to validate the size calculation before
allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| OpenSSH before 10.3 mishandles the authorized_keys principals option in uncommon scenarios involving a principals list in conjunction with a Certificate Authority that makes certain use of comma characters. |
| A flaw was found in the GNU Binutils BFD library, a widely used component for handling binary files such as object files and executables. The issue occurs when processing specially crafted XCOFF object files, where a relocation type value is not properly validated before being used. This can cause the program to read memory outside of intended bounds. As a result, affected tools may crash or expose unintended memory contents, leading to denial-of-service or limited information disclosure risks. |
| PraisonAI is a multi-agent teams system. Prior to version 4.5.90, MCPToolIndex.search_tools() compiles a caller-supplied string directly as a Python regular expression with no validation, sanitization, or timeout. A crafted regex causes catastrophic backtracking in the re engine, blocking the Python thread for hundreds of seconds and causing a complete service outage. This issue has been patched in version 4.5.90. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8, the select-usb-device event callback did not validate the chosen device ID against the filtered list that was presented to the handler. An app whose handler could be influenced to select a device ID outside the filtered set would grant access to a device that did not match the renderer's requested filters or was listed in exclusionFilters. The WebUSB security blocklist remained enforced regardless, so security-sensitive devices on the blocklist were not affected. The practical impact is limited to apps with unusual device-selection logic. This issue has been patched in versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.3, 40.8.3, and 41.0.3, apps that register custom protocol handlers via protocol.handle() / protocol.registerSchemesAsPrivileged() or modify response headers via webRequest.onHeadersReceived may be vulnerable to HTTP response header injection if attacker-controlled input is reflected into a response header name or value. An attacker who can influence a header value may be able to inject additional response headers, affecting cookies, content security policy, or cross-origin access controls. Apps that do not reflect external input into response headers are not affected. This issue has been patched in versions 38.8.6, 39.8.3, 40.8.3, and 41.0.3. |
