| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix data race on CQP request done
KCSAN detects a data race on cqp_request->request_done memory location
which is accessed locklessly in irdma_handle_cqp_op while being
updated in irdma_cqp_ce_handler.
Annotate lockless intent with READ_ONCE/WRITE_ONCE to avoid any
compiler optimizations like load fusing and/or KCSAN warning.
[222808.417128] BUG: KCSAN: data-race in irdma_cqp_ce_handler [irdma] / irdma_wait_event [irdma]
[222808.417532] write to 0xffff8e44107019dc of 1 bytes by task 29658 on cpu 5:
[222808.417610] irdma_cqp_ce_handler+0x21e/0x270 [irdma]
[222808.417725] cqp_compl_worker+0x1b/0x20 [irdma]
[222808.417827] process_one_work+0x4d1/0xa40
[222808.417835] worker_thread+0x319/0x700
[222808.417842] kthread+0x180/0x1b0
[222808.417852] ret_from_fork+0x22/0x30
[222808.417918] read to 0xffff8e44107019dc of 1 bytes by task 29688 on cpu 1:
[222808.417995] irdma_wait_event+0x1e2/0x2c0 [irdma]
[222808.418099] irdma_handle_cqp_op+0xae/0x170 [irdma]
[222808.418202] irdma_cqp_cq_destroy_cmd+0x70/0x90 [irdma]
[222808.418308] irdma_puda_dele_rsrc+0x46d/0x4d0 [irdma]
[222808.418411] irdma_rt_deinit_hw+0x179/0x1d0 [irdma]
[222808.418514] irdma_ib_dealloc_device+0x11/0x40 [irdma]
[222808.418618] ib_dealloc_device+0x2a/0x120 [ib_core]
[222808.418823] __ib_unregister_device+0xde/0x100 [ib_core]
[222808.418981] ib_unregister_device+0x22/0x40 [ib_core]
[222808.419142] irdma_ib_unregister_device+0x70/0x90 [irdma]
[222808.419248] i40iw_close+0x6f/0xc0 [irdma]
[222808.419352] i40e_client_device_unregister+0x14a/0x180 [i40e]
[222808.419450] i40iw_remove+0x21/0x30 [irdma]
[222808.419554] auxiliary_bus_remove+0x31/0x50
[222808.419563] device_remove+0x69/0xb0
[222808.419572] device_release_driver_internal+0x293/0x360
[222808.419582] driver_detach+0x7c/0xf0
[222808.419592] bus_remove_driver+0x8c/0x150
[222808.419600] driver_unregister+0x45/0x70
[222808.419610] auxiliary_driver_unregister+0x16/0x30
[222808.419618] irdma_exit_module+0x18/0x1e [irdma]
[222808.419733] __do_sys_delete_module.constprop.0+0x1e2/0x310
[222808.419745] __x64_sys_delete_module+0x1b/0x30
[222808.419755] do_syscall_64+0x39/0x90
[222808.419763] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[222808.419829] value changed: 0x01 -> 0x03 |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: imx: disable Ageing Timer interrupt request irq
There maybe pending USR interrupt before requesting irq, however
uart_add_one_port has not executed, so there will be kernel panic:
[ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre
ss 0000000000000080
[ 0.802701] Mem abort info:
[ 0.805367] ESR = 0x0000000096000004
[ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.814033] SET = 0, FnV = 0
[ 0.816950] EA = 0, S1PTW = 0
[ 0.819950] FSC = 0x04: level 0 translation fault
[ 0.824617] Data abort info:
[ 0.827367] ISV = 0, ISS = 0x00000004
[ 0.831033] CM = 0, WnR = 0
[ 0.833866] [0000000000000080] user address but active_mm is swapper
[ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 0.845953] Modules linked in:
[ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1
[ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT)
[ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0
[ 0.872283] lr : imx_uart_int+0xf8/0x1ec
The issue only happends in the inmate linux when Jailhouse hypervisor
enabled. The test procedure is:
while true; do
jailhouse enable imx8mp.cell
jailhouse cell linux xxxx
sleep 10
jailhouse cell destroy 1
jailhouse disable
sleep 5
done
And during the upper test, press keys to the 2nd linux console.
When `jailhouse cell destroy 1`, the 2nd linux has no chance to put
the uart to a quiese state, so USR1/2 may has pending interrupts. Then
when `jailhosue cell linux xx` to start 2nd linux again, the issue
trigger.
In order to disable irqs before requesting them, both UCR1 and UCR2 irqs
should be disabled, so here fix that, disable the Ageing Timer interrupt
in UCR2 as UCR1 does. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace
A received TKIP key may be up to 32 bytes because it may contain
MIC rx/tx keys too. These are not used by iwl and copying these
over overflows the iwl_keyinfo.key field.
Add a check to not copy more data to iwl_keyinfo.key then will fit.
This fixes backtraces like this one:
memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16)
WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017
RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Call Trace:
<TASK>
iwl_set_dynamic_key+0x1f0/0x220 [iwldvm]
iwlagn_mac_set_key+0x1e4/0x280 [iwldvm]
drv_set_key+0xa4/0x1b0 [mac80211]
ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211]
ieee80211_key_replace+0x22d/0x8e0 [mac80211]
<snip> |
| The JWT secret key is embedded in the egOS WebGUI backend and is readable to the default user. An unauthenticated remote attacker can generate valid HS256 tokens and bypass authentication/authorization due to the use of hard-coded cryptographic key. |
| In the Linux kernel, the following vulnerability has been resolved:
media: av7110: prevent underflow in write_ts_to_decoder()
The buf[4] value comes from the user via ts_play(). It is a value in
the u8 range. The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative. It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.
With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Address KCSAN report on bpf_lru_list
KCSAN reported a data-race when accessing node->ref.
Although node->ref does not have to be accurate,
take this chance to use a more common READ_ONCE() and WRITE_ONCE()
pattern instead of data_race().
There is an existing bpf_lru_node_is_ref() and bpf_lru_node_set_ref().
This patch also adds bpf_lru_node_clear_ref() to do the
WRITE_ONCE(node->ref, 0) also.
==================================================================
BUG: KCSAN: data-race in __bpf_lru_list_rotate / __htab_lru_percpu_map_update_elem
write to 0xffff888137038deb of 1 bytes by task 11240 on cpu 1:
__bpf_lru_node_move kernel/bpf/bpf_lru_list.c:113 [inline]
__bpf_lru_list_rotate_active kernel/bpf/bpf_lru_list.c:149 [inline]
__bpf_lru_list_rotate+0x1bf/0x750 kernel/bpf/bpf_lru_list.c:240
bpf_lru_list_pop_free_to_local kernel/bpf/bpf_lru_list.c:329 [inline]
bpf_common_lru_pop_free kernel/bpf/bpf_lru_list.c:447 [inline]
bpf_lru_pop_free+0x638/0xe20 kernel/bpf/bpf_lru_list.c:499
prealloc_lru_pop kernel/bpf/hashtab.c:290 [inline]
__htab_lru_percpu_map_update_elem+0xe7/0x820 kernel/bpf/hashtab.c:1316
bpf_percpu_hash_update+0x5e/0x90 kernel/bpf/hashtab.c:2313
bpf_map_update_value+0x2a9/0x370 kernel/bpf/syscall.c:200
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1687
bpf_map_do_batch+0x2d9/0x3d0 kernel/bpf/syscall.c:4534
__sys_bpf+0x338/0x810
__do_sys_bpf kernel/bpf/syscall.c:5096 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5094 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5094
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888137038deb of 1 bytes by task 11241 on cpu 0:
bpf_lru_node_set_ref kernel/bpf/bpf_lru_list.h:70 [inline]
__htab_lru_percpu_map_update_elem+0x2f1/0x820 kernel/bpf/hashtab.c:1332
bpf_percpu_hash_update+0x5e/0x90 kernel/bpf/hashtab.c:2313
bpf_map_update_value+0x2a9/0x370 kernel/bpf/syscall.c:200
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1687
bpf_map_do_batch+0x2d9/0x3d0 kernel/bpf/syscall.c:4534
__sys_bpf+0x338/0x810
__do_sys_bpf kernel/bpf/syscall.c:5096 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5094 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5094
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11241 Comm: syz-executor.3 Not tainted 6.3.0-rc7-syzkaller-00136-g6a66fdd29ea1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
================================================================== |
| OpenSSL 3.0.0 through 3.3.2 on the PowerPC architecture is vulnerable to a Minerva attack, exploitable by measuring the time of signing of random messages using the EVP_DigestSign API, and then using the private key to extract the K value (nonce) from the signatures. Next, based on the bit size of the extracted nonce, one can compare the signing time of full-sized nonces to signatures that used smaller nonces, via statistical tests. There is a side-channel in the P-364 curve that allows private key extraction (also, there is a dependency between the bit size of K and the size of the side channel). NOTE: This CVE is disputed because the OpenSSL security policy explicitly notes that any side channels which require same physical system to be detected are outside of the threat model for the software. The timing signal is so small that it is infeasible to be detected without having the attacking process running on the same physical system. |
| A low privileged local attacker can interact with the affected service although user-interaction should not be allowed. |
| Description
In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input.
Specifically, an application is vulnerable when all the following are true:
* The header is prepared with org.springframework.http.ContentDisposition.
* The filename is set via ContentDisposition.Builder#filename(String, Charset).
* The value for the filename is derived from user-supplied input.
* The application does not sanitize the user-supplied input.
* The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details).
An application is not vulnerable if any of the following is true:
* The application does not set a “Content-Disposition” response header.
* The header is not prepared with org.springframework.http.ContentDisposition.
* The filename is set via one of: * ContentDisposition.Builder#filename(String), or
* ContentDisposition.Builder#filename(String, ASCII)
* The filename is not derived from user-supplied input.
* The filename is derived from user-supplied input but sanitized by the application.
* The attacker cannot inject malicious content in the downloaded content of the response.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.7
* 6.1.0 - 6.1.20
* 6.0.5 - 6.0.28
* Older, unsupported versions are not affected
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. |
| thread-amount is a tool that gets the amount of threads in the current process. Prior to version 0.2.2, there are resource leaks when querying thread counts on Windows and Apple platforms. In Windows platforms, the thread_amount function calls CreateToolhelp32Snapshot but fails to close the returned HANDLE using CloseHandle. Repeated calls to this function will cause the handle count of the process to grow indefinitely, eventually leading to system instability or process termination when the handle limit is reached. In Apple platforms, the thread_amount function calls task_threads (via Mach kernel APIs) which allocates memory for the thread list. The function fails to deallocate this memory using vm_deallocate. Repeated calls will result in a steady memory leak, eventually causing the process to be killed by the OOM (Out of Memory) killer. This issue has been patched in version 0.2.2. |
| A vulnerability in Cisco Catalyst Center Virtual Appliance could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected system.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to perform unauthorized modifications to the system, including creating new user accounts or elevating their own privileges on an affected system. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. |
| The Sparkle framework includes a helper tool Autoupdate. Due to lack of authentication of connecting clients a local unprivileged attacker can request installation of crafted malicious PKG file by racing to connect to the daemon when other app spawns it as root. This results in local privilege escalation to root privileges. It is worth noting that it is possible to spawn Autopudate manually via Installer XPC service. However this requires the victim to enter credentials upon system authorization dialog creation that can be modified by the attacker.
This issue was fixed in version 2.7.2 |
| A flaw exists in the SAML signature validation method within the Keycloak XMLSignatureUtil class. The method incorrectly determines whether a SAML signature is for the full document or only for specific assertions based on the position of the signature in the XML document, rather than the Reference element used to specify the signed element. This flaw allows attackers to create crafted responses that can bypass the validation, potentially leading to privilege escalation or impersonation attacks. |
| The Community by PeepSo – Download from PeepSo.com plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘filter’ parameter in all versions up to, and including, 7.0.3.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| A token is created using the username, current date/time, and a fixed
AES-128 encryption key, which is the same across all installations. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net
Commit f5f9d4a314da ("nfsd: move reply cache initialization into nfsd
startup") moved the initialization of the reply cache into nfsd startup,
but didn't account for the stats counters, which can be accessed before
nfsd is ever started. The result can be a NULL pointer dereference when
someone accesses /proc/fs/nfsd/reply_cache_stats while nfsd is still
shut down.
This is a regression and a user-triggerable oops in the right situation:
- non-x86_64 arch
- /proc/fs/nfsd is mounted in the namespace
- nfsd is not started in the namespace
- unprivileged user calls "cat /proc/fs/nfsd/reply_cache_stats"
Although this is easy to trigger on some arches (like aarch64), on
x86_64, calling this_cpu_ptr(NULL) evidently returns a pointer to the
fixed_percpu_data. That struct looks just enough like a newly
initialized percpu var to allow nfsd_reply_cache_stats_show to access
it without Oopsing.
Move the initialization of the per-net+per-cpu reply-cache counters
back into nfsd_init_net, while leaving the rest of the reply cache
allocations to be done at nfsd startup time.
Kudos to Eirik who did most of the legwork to track this down. |
| In some specific scenarios with chained redirects, Reactor Netty HTTP client leaks credentials. In order for this to happen, the HTTP client must have been explicitly configured to follow redirects. |
| Spring Security 6.4.0 - 6.4.3 may not correctly locate method security annotations on parameterized types or methods. This may cause an authorization bypass.
You are not affected if you are not using @EnableMethodSecurity, or
you do not have method security annotations on parameterized types or methods, or all method security annotations are attached to target methods |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: Remove calls to drm_put_dev()
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd
should be done by devres.
However, drm_put_dev() is still in the probe error and device remove
paths. When the driver fails to probe warnings like the following are
shown because devres is trying to drm_put_dev() after the driver
already did it.
[ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22
[ 5.649605] ------------[ cut here ]------------
[ 5.649607] refcount_t: underflow; use-after-free.
[ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
(cherry picked from commit 3eb8c0b4c091da0a623ade0d3ee7aa4a93df1ea4) |
| In the Linux kernel, the following vulnerability has been resolved:
s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
As reported by Luiz Capitulino enabling HVO on s390 leads to reproducible
crashes. The problem is that kernel page tables are modified without
flushing corresponding TLB entries.
Even if it looks like the empty flush_tlb_all() implementation on s390 is
the problem, it is actually a different problem: on s390 it is not allowed
to replace an active/valid page table entry with another valid page table
entry without the detour over an invalid entry. A direct replacement may
lead to random crashes and/or data corruption.
In order to invalidate an entry special instructions have to be used
(e.g. ipte or idte). Alternatively there are also special instructions
available which allow to replace a valid entry with a different valid
entry (e.g. crdte or cspg).
Given that the HVO code currently does not provide the hooks to allow for
an implementation which is compliant with the s390 architecture
requirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which is
basically a revert of the original patch which enabled it. |
