| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ** DISPUTED ** A vulnerability, which was classified as problematic, was found in Intelbras MHDX 1004, MHDX 1008, MHDX 1016, MHDX 5016, HDCVI 1008 and HDCVI 1016 up to 20240401. This affects an unknown part of the file /cap.js of the component HTTP GET Request Handler. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier VDB-258933 was assigned to this vulnerability. NOTE: The vendor explains that they do not classify the information shown as sensitive and therefore there is no vulnerability which is about to harm the user. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in appscreo Easy Social Share Buttons easy-social-share-buttons3 allows Reflected XSS.This issue affects Easy Social Share Buttons: from n/a through < 10.7.1. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix slab-out-of-bounds in _parse_integer_limit()
When config osnoise cpus by write() syscall, the following KASAN splat may
be observed:
BUG: KASAN: slab-out-of-bounds in _parse_integer_limit+0x103/0x130
Read of size 1 at addr ffff88810121e3a1 by task test/447
CPU: 1 UID: 0 PID: 447 Comm: test Not tainted 6.17.0-rc6-dirty #288 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x610
kasan_report+0xb8/0xf0
_parse_integer_limit+0x103/0x130
bitmap_parselist+0x16d/0x6f0
osnoise_cpus_write+0x116/0x2d0
vfs_write+0x21e/0xcc0
ksys_write+0xee/0x1c0
do_syscall_64+0xa8/0x2a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
const char *cpulist = "1";
int fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, cpulist, strlen(cpulist));
Function bitmap_parselist() was called to parse cpulist, it require that
the parameter 'buf' must be terminated with a '\0' or '\n'. Fix this issue
by adding a '\0' to 'buf' in osnoise_cpus_write(). |
| RemoteCall Remote Support Program (for Operator) versions prior to 5.3.0 contain an uncontrolled search path element vulnerability. If a crafted DLL is placed in the same folder with the affected product, it may cause an arbitrary code execution. |
| A vulnerability has been found in mingyuefusu 明月复苏 tushuguanlixitong 图书管理系统 up to d4836f6b49cd0ac79a4021b15ce99ff7229d4694 and classified as critical. Affected by this vulnerability is the function doFilter of the file /admin/ of the component Backend. The manipulation of the argument Request leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| React Router is a router for React. In versions on the 7.0 branch prior to version 7.5.2, it's possible to modify pre-rendered data by adding a header to the request. This allows to completely spoof its contents and modify all the values of the data object passed to the HTML. This issue has been patched in version 7.5.2. |
| XMLUnit for Java before 2.10.0, in the default configuration, might allow code execution via an untrusted stylesheet (used for an XSLT transformation), because XSLT extension functions are enabled. |
| RemoteView PC Application Console versions prior to 6.0.2 contain an uncontrolled search path element vulnerability. If a crafted DLL is placed in the same folder with the affected product, it may cause an arbitrary code execution. |
| A SQL injection in Articles Good Search extension 1.0.0 - 1.2.4.0011 for Joomla allows attackers to execute arbitrary SQL commands. |
| DbGate is cross-platform database manager. In versions 6.6.0 and below, DbGate allows unauthorized file access due to insufficient validation of file paths and types. A user with application-level access can retrieve data from arbitrary files on the system, regardless of their location or file type. The plugin fails to enforce proper checks on content type and file extension before reading a file. As a result, even sensitive files accessible only to the root user can be read through the application interface. There is currently no fix for this issue.
```
POST /runners/load-reader HTTP/1.1
Host: <REPLACE ME>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:138.0) Gecko/20100101 Firefox/138.0
Accept: */*
Accept-Language: en-US,en;q=0.5
Accept-Encoding: gzip, deflate, br
Referer: <REPLACE ME>
Content-Type: application/json
Authorization: Bearer <REPLACE ME>
Content-Length: 127
Origin: http://192.168.124.119:3000
Connection: keep-alive
Cookie: <REPLACE ME>
Priority: u=0
Cache-Control: max-age=0
{"functionName":"reader@dbgate-plugin-csv","props":{"fileName":"/etc\/shadow","limitRows":100}}
```
The request payload:
Lines of the file being returned:
 |
| React Router is a router for React. Starting in version 7.2.0 and prior to version 7.5.2, it is possible to force an application to switch to SPA mode by adding a header to the request. If the application uses SSR and is forced to switch to SPA, this causes an error that completely corrupts the page. If a cache system is in place, this allows the response containing the error to be cached, resulting in a cache poisoning that strongly impacts the availability of the application. This issue has been patched in version 7.5.2. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: add validation for ring_len param
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32. |
| A vulnerability in the DHCP client functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to exhaust available memory.
This vulnerability is due to improper validation of incoming DHCP packets. An attacker could exploit this vulnerability by repeatedly sending crafted DHCPv4 packets to an affected device. A successful exploit could allow the attacker to exhaust available memory, which would affect availability of services and prevent new processes from starting, resulting in a Denial of Service (DoS) condition that would require a manual reboot.
Note: On Cisco Secure FTD Software, this vulnerability does not affect management interfaces. |
| YoutubeDLSharp is a wrapper for the command-line video downloaders youtube-dl and yt-dlp. In versions starting from 1.0.0-beta4 and prior to 1.1.2, an unsafe conversion of arguments allows the injection of a malicious commands when starting `yt-dlp` from a commands prompt running on Windows OS with the `UseWindowsEncodingWorkaround` value defined to true (default behavior). If a user is using built-in methods from the YoutubeDL.cs file, the value is true by default and a user cannot disable it from these methods. This issue has been patched in version 1.1.2. |
| A vulnerability classified as problematic has been found in dazhouda lecms 3.0.3. This affects an unknown part of the file /index.php?my-profile-ajax-1 of the component Personal Information Page. The manipulation leads to cross-site request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. The `nimiq-network-libp2p` subcrate of nimiq/core-rs-albatross is vulnerable to a Denial of Service (DoS) attack due to uncontrolled memory allocation. Specifically, the implementation of the `Discovery` network message handling allocates a buffer based on a length value provided by the peer, without enforcing an upper bound. Since this length is a `u32`, a peer can trigger allocations of up to 4 GB, potentially leading to memory exhaustion and node crashes. As Discovery messages are regularly exchanged for peer discovery, this vulnerability can be exploited repeatedly. The patch for this vulnerability is formally released as part of v1.1.0. The patch implements a limit to the discovery message size of 1 MB and also resizes the message buffer size incrementally as the data is read. No known workarounds are available. |
| tRPC allows users to build & consume fully typesafe APIs without schemas or code generation. In versions starting from 11.0.0 to before 11.1.1, an unhandled error is thrown when validating invalid connectionParams which crashes a tRPC WebSocket server. This allows any unauthenticated user to crash a tRPC 11 WebSocket server. Any tRPC 11 server with WebSocket enabled with a createContext method set is vulnerable. This issue has been patched in version 11.1.1. |
| An out-of-bound write can lead to an arbitrary code execution. Even on devices with some form of memory protection, this can still lead to a crash and a resultant denial of service. |
| The FlexTable WordPress plugin before 3.19.2 does not sanitise and escape the imported links from Google Sheet cells, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup). |
| Manifest offers users a one-file micro back end. Prior to version 4.9.2, Manifest employs a weak password hashing implementation that uses SHA3 without a salt. This exposes user passwords to a higher risk of being cracked if an attacker gains access to the database. Without the use of a salt, identical passwords across multiple users will result in the same hash, making it easier for attackers to identify and exploit patterns, thereby accelerating the cracking process. Version 4.9.2 fixes the issue. |
