| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Caido is a web security auditing toolkit. Prior to 0.55.0, Caido blocks non whitelisted domains to reach out through the 8080 port, and shows Host/IP is not allowed to connect to Caido on all endpoints. But this is bypassable by injecting a X-Forwarded-Host: 127.0.0.1:8080 header. This vulnerability is fixed in 0.55.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem, swap: fix race of truncate and swap entry split
The helper for shmem swap freeing is not handling the order of swap
entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it
gets the entry order before that using xa_get_order without lock
protection, and it may get an outdated order value if the entry is split
or changed in other ways after the xa_get_order and before the
xa_cmpxchg_irq.
And besides, the order could grow and be larger than expected, and cause
truncation to erase data beyond the end border. For example, if the
target entry and following entries are swapped in or freed, then a large
folio was added in place and swapped out, using the same entry, the
xa_cmpxchg_irq will still succeed, it's very unlikely to happen though.
To fix that, open code the Xarray cmpxchg and put the order retrieval and
value checking in the same critical section. Also, ensure the order won't
exceed the end border, skip it if the entry goes across the border.
Skipping large swap entries crosses the end border is safe here. Shmem
truncate iterates the range twice, in the first iteration,
find_lock_entries already filtered such entries, and shmem will swapin the
entries that cross the end border and partially truncate the folio (split
the folio or at least zero part of it). So in the second loop here, if we
see a swap entry that crosses the end order, it must at least have its
content erased already.
I observed random swapoff hangs and kernel panics when stress testing
ZSWAP with shmem. After applying this patch, all problems are gone. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/nvm: Fix double-free on aux add failure
After a successful auxiliary_device_init(), aux_dev->dev.release
(xe_nvm_release_dev()) is responsible for the kfree(nvm). When
there is failure with auxiliary_device_add(), driver will call
auxiliary_device_uninit(), which call put_device(). So that the
.release callback will be triggered to free the memory associated
with the auxiliary_device.
Move the kfree(nvm) into the auxiliary_device_init() failure path
and remove the err goto path to fix below error.
"
[ 13.232905] ==================================================================
[ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe]
[ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273
[ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary)
...
[ 13.233125] Call Trace:
[ 13.233126] <TASK>
[ 13.233127] dump_stack_lvl+0x7f/0xc0
[ 13.233132] print_report+0xce/0x610
[ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0
[ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe]
...
"
v2: drop err goto path. (Alexander)
(cherry picked from commit a3187c0c2bbd947ffff97f90d077ac88f9c2a215) |
| A security flaw has been discovered in yued-fe LuLu UI up to 3.0.0. This issue affects the function child_process.exec of the file run.js. The manipulation results in os command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in the github.com/containers/image library. This flaw allows attackers to trigger unexpected authenticated registry accesses on behalf of a victim user, causing resource exhaustion, local path traversal, and other attacks. |
| Crypt::URandom versions from 0.41 before 0.55 for Perl is vulnerable to a heap buffer overflow in the XS function crypt_urandom_getrandom().
The function does not validate that the length parameter is non-negative. If a negative value (e.g. -1) is supplied, the expression length + 1u causes an integer wraparound, resulting in a zero-byte allocation. The subsequent call to getrandom(data, length, GRND_NONBLOCK) passes the original negative value, which is implicitly converted to a large unsigned value (typically SIZE_MAX). This can result in writes beyond the allocated buffer, leading to heap memory corruption and application crash (denial of service).
In common usage, the length argument is typically hardcoded by the caller, which reduces the likelihood of attacker-controlled exploitation. Applications that pass untrusted input to this parameter may be affected. |
| A vulnerability was detected in itsourcecode Event Management System 1.0. Affected is an unknown function of the file /admin/manage_booking.php. The manipulation of the argument ID results in sql injection. The attack may be performed from remote. The exploit is now public and may be used. |
| go-ethereum (Geth) is a golang execution layer implementation of the Ethereum protocol. Prior to version 1.16.9, through a flaw in the ECIES cryptography implementation, an attacker may be able to extract bits of the p2p node key. The issue is resolved in the v1.16.9 and v1.17.0 releases of Geth. Geth maintainers recommend rotating the node key after applying the upgrade, which can be done by removing the file `<datadir>/geth/nodekey` before starting Geth. |
| OpenClaw is a personal AI assistant. Prior to OpenClaw version 2026.2.14, the Feishu extension previously allowed `sendMediaFeishu` to treat attacker-controlled `mediaUrl` values as local filesystem paths and read them directly. If an attacker can influence tool calls (directly or via prompt injection), they may be able to exfiltrate local files by supplying paths such as `/etc/passwd` as `mediaUrl`. Upgrade to OpenClaw `2026.2.14` or newer to receive a fix. The fix removes direct local file reads from this path and routes media loading through hardened helpers that enforce local-root restrictions. |
| calibre is a cross-platform e-book manager for viewing, converting, editing, and cataloging e-books. Versions 9.2.1 and below are vulnerable to Path Traversal through PDB readers (both 132-byte and 202-byte header variants) that allow arbitrary file writes with arbitrary extension and arbitrary content anywhere the user has write permissions. Files are written in 'wb' mode, silently overwriting existing files. This can lead to potential code execution and Denial of Service through file corruption. This issue has been fixed in version 9.3.0. |
| A vulnerability was detected in UTT HiPER 520 1.7.7-160105. Affected is the function sub_44EFB4 of the file /goform/formReleaseConnect of the component Web Management Interface. The manipulation of the argument Isp_Name results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. |
| A flaw has been found in D-Link DWR-M960 1.01.07. This impacts the function sub_4611CC of the file /boafrm/formNtp of the component NTP Configuration Endpoint. Executing a manipulation of the argument submit-url can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. |
| A security vulnerability has been detected in Tenda HG9 300001138. Affected by this issue is some unknown functionality of the file /boaform/formLoopBack of the component Loopback Detection Configuration Endpoint. Such manipulation of the argument Ethtype leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was determined in UTT HiPER 810G up to 1.7.7-171114. Impacted is the function strcpy of the file /goform/formPolicyRouteConf. Executing a manipulation of the argument GroupName can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| Versions of the Traccar open-source GPS tracking system starting with 6.11.1 contain an issue in which authenticated users can execute arbitrary JavaScript in the context of other users' browsers by uploading malicious SVG files as device images. The application accepts SVG file uploads without sanitization and serves them with the `image/svg+xml` Content-Type, allowing embedded JavaScript to execute when victims view the image. As of time of publication, it is unclear whether a fix is available. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. `WriteUHDRImage` in `coders/uhdr.c` uses `int` arithmetic to compute the pixel buffer size. Prior to version 7.1.2-15, when image dimensions are large, the multiplication overflows 32-bit `int`, causing an undersized heap allocation followed by an out-of-bounds write. This can crash the process or potentially lead to an out of bounds heap write. Version 7.1.2-15 contains a patch. |
| A credentials leak vulnerability was found in the cluster monitoring operator in OCP. This issue may allow a remote attacker who has basic login credentials to check the pod manifest to discover a repository pull secret. |
| A memory leak flaw was found in Golang in the RSA encrypting/decrypting code, which might lead to a resource exhaustion vulnerability using attacker-controlled inputs. The memory leak happens in github.com/golang-fips/openssl/openssl/rsa.go#L113. The objects leaked are pkey and ctx. That function uses named return parameters to free pkey and ctx if there is an error initializing the context or setting the different properties. All return statements related to error cases follow the "return nil, nil, fail(...)" pattern, meaning that pkey and ctx will be nil inside the deferred function that should free them. |
| A vulnerability exists in REB500 for an authenticated user with Installer role to access and alter the contents of directories that the role is not authorized to do so. |
| Fiber is an Express inspired web framework written in Go. A denial of service vulnerability exists in Fiber v2 and v3 that allows remote attackers to crash the application by sending requests to routes with more than 30 parameters. The vulnerability results from missing validation during route registration combined with an unbounded array write during request matching. Version 2.52.12 patches the issue in the v2 branch and 3.1.0 patches the issue in the v3 branch. |
