| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper initialization in firmware for some Intel(R) PROSet/Wireless Software and Intel(R) Killer(TM) Wi-Fi before version 23.40 may allow a privileged user to potentially enable information disclosure via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
hid: cp2112: Fix duplicate workqueue initialization
Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.
Initialize the workqueue within _probe instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Avoid crash from unnecessary IDA free
In the remove path, there is an attempt to free the aux_idx IDA whether
it was allocated or not. This can potentially cause a crash when
unloading the driver on systems that do not initialize support for RDMA.
But, this free cannot be gated by the status bit for RDMA, since it is
allocated if the driver detects support for RDMA at probe time, but the
driver can enter into a state where RDMA is not supported after the IDA
has been allocated at probe time and this would lead to a memory leak.
Initialize aux_idx to an invalid value and check for a valid value when
unloading to determine if an IDA free is necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix freeing of uninitialized misc IRQ vector
When VSI set up failed in i40e_probe() as part of PF switch set up
driver was trying to free misc IRQ vectors in
i40e_clear_interrupt_scheme and produced a kernel Oops:
Trying to free already-free IRQ 266
WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300
Workqueue: events work_for_cpu_fn
RIP: 0010:__free_irq+0x9a/0x300
Call Trace:
? synchronize_irq+0x3a/0xa0
free_irq+0x2e/0x60
i40e_clear_interrupt_scheme+0x53/0x190 [i40e]
i40e_probe.part.108+0x134b/0x1a40 [i40e]
? kmem_cache_alloc+0x158/0x1c0
? acpi_ut_update_ref_count.part.1+0x8e/0x345
? acpi_ut_update_object_reference+0x15e/0x1e2
? strstr+0x21/0x70
? irq_get_irq_data+0xa/0x20
? mp_check_pin_attr+0x13/0xc0
? irq_get_irq_data+0xa/0x20
? mp_map_pin_to_irq+0xd3/0x2f0
? acpi_register_gsi_ioapic+0x93/0x170
? pci_conf1_read+0xa4/0x100
? pci_bus_read_config_word+0x49/0x70
? do_pci_enable_device+0xcc/0x100
local_pci_probe+0x41/0x90
work_for_cpu_fn+0x16/0x20
process_one_work+0x1a7/0x360
worker_thread+0x1cf/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x1f/0x40
The problem is that at that point misc IRQ vectors
were not allocated yet and we get a call trace
that driver is trying to free already free IRQ vectors.
Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED
PF state before calling i40e_free_misc_vector. This state is set only if
misc IRQ vectors were properly initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix request.queuelist usage in flush
Friedrich Weber reported a kernel crash problem and bisected to commit
81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine").
The root cause is that we use "list_move_tail(&rq->queuelist, pending)"
in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since
it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch().
We don't initialize its queuelist just for this first request, although
the queuelist of all later popped requests will be initialized.
Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so
rq->queuelist doesn't need to be initialized. It should be ok since rq
can't be on any list when PREFLUSH or POSTFLUSH, has no move actually.
Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in
flush state machine") also has another requirement that no drivers would
touch rq->queuelist after blk_mq_end_request() since we will reuse it to
add rq to the post-flush pending list in POSTFLUSH. If this is not true,
we will have to revert that commit IMHO.
This updated version adds "list_del_init(&rq->queuelist)" in flush rq
callback since the dm layer may submit request of a weird invalid format
(REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add
if without this "list_del_init(&rq->queuelist)". The weird invalid format
problem should be fixed in dm layer. |
| A vulnerability in the Hot Standby Router Protocol (HSRP) subsystem of Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to receive potentially sensitive information from an affected device. The vulnerability is due to insufficient memory initialization. An attacker could exploit this vulnerability by receiving HSRPv2 traffic from an adjacent HSRP member. A successful exploit could allow the attacker to receive potentially sensitive information from the adjacent device. |
| A flaw was found in the way xserver memory was not properly initialized. This could leak parts of server memory to the X client. In cases where Xorg server runs with elevated privileges, this could result in possible ASLR bypass. Xorg-server before version 1.20.9 is vulnerable. |
| Uninitialized data in endianness conversion in the XEvent handling of the X.Org X Server before 2017-06-19 allowed authenticated malicious users to access potentially privileged data from the X server. |
| Improper initialization in some Intel(R) Power Gadget software for Windwos all versions may allow an authenticated user to potentially enable denial of service via local access. |
| Improper initialization in the Linux kernel-mode driver for some Intel(R) I350 Series Ethernet before version 5.19.2 may allow an authenticated user to potentially enable Information disclosure via data exposure. |
| After initial configuration, the Ruggedcom Discovery Protocol (RCDP) is still able to write to the device under certain conditions.
This could allow an attacker located in the adjacent network of the targeted device to perform unauthorized administrative actions. |
| Parallels Desktop Updater Improper Initialization Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop. An attacker must first obtain the ability to execute low-privileged code on the target host system in order to exploit this vulnerability.
The specific flaw exists within the Updater service. The issue results from the lack of proper initialization of environment variables. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root.
. Was ZDI-CAN-18229. |
| Parallels Desktop Service Improper Initialization Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop. An attacker must first obtain the ability to execute low-privileged code on the target host system in order to exploit this vulnerability.
The specific flaw exists within the Parallels Service. The issue results from the lack of proper initialization of environment variables. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-17751. |
| Parallels Desktop Updater Improper Initialization Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop. An attacker must first obtain the ability to execute low-privileged code on the target host system in order to exploit this vulnerability.
The specific flaw exists within the Updater service. The issue results from the lack of proper initialization of environment variables. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root.
. Was ZDI-CAN-18253. |
| In fvp_freq_histogram_init of fvp.c, there is a possible Information Disclosure due to uninitialized data. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In plugin_ipc_handler of slc_plugin.c, there is a possible information disclosure due to uninitialized data. This could lead to local information disclosure of 4 bytes of stack memory with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
efi: libstub: only free priv.runtime_map when allocated
priv.runtime_map is only allocated when efi_novamap is not set.
Otherwise, it is an uninitialized value. In the error path, it is freed
unconditionally. Avoid passing an uninitialized value to free_pool.
Free priv.runtime_map only when it was allocated.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| Improper initialization of variables in the DXE driver may allow a privileged user to leak sensitive information via local access. |
| Improper initialization of variables in the DXE driver may allow a privileged user to leak sensitive information via local access. |
| sec_attest_info in drivers/accel/habanalabs/common/habanalabs_ioctl.c in the Linux kernel through 6.6.5 allows an information leak to user space because info->pad0 is not initialized. |
