| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PHP-Charts v1.0 contains a PHP code execution vulnerability in wizard/url.php, where user-supplied GET parameter names are passed directly to eval() without sanitization. A remote attacker can exploit this flaw by crafting a request that injects arbitrary PHP code, resulting in command execution under the web server's context. The vulnerability allows unauthenticated attackers to execute system-level commands via base64-encoded payloads embedded in parameter names, leading to full compromise of the host system. |
| A remote code execution vulnerability exists in HybridAuth versions 2.0.9 through 2.2.2 due to insecure use of the install.php installation script. The script remains accessible after deployment and fails to sanitize input before writing to the application’s config.php file. An unauthenticated attacker can inject arbitrary PHP code into config.php, which is later executed when the file is loaded. This allows attackers to achieve remote code execution on the server. Exploitation of this issue will overwrite the existing configuration, rendering the application non-functional. |
| A command injection vulnerability exists in the eScan Web Management Console version 5.5-2. The application fails to properly sanitize the 'pass' parameter when processing login requests to login.php, allowing an authenticated attacker with a valid username to inject arbitrary commands via a specially crafted password value. Successful exploitation results in remote code execution. Privilege escalation to root is possible by abusing the runasroot utility with mwconf-level privileges. |
| A remote code execution vulnerability exists in Kaltura versions prior to 11.1.0-2 due to unsafe deserialization of user-controlled data within the keditorservices module. An unauthenticated remote attacker can exploit this issue by sending a specially crafted serialized PHP object in the kdata GET parameter to the redirectWidgetCmd endpoint. Successful exploitation leads to execution of arbitrary PHP code in the context of the web server process. |
| The issue stems from a missing validation of the pip field in a POST request sent to the /customnode/install endpoint used to install custom nodes which is added to the server by the extension. This allows an attacker to craft a request that triggers a pip install on a user controlled package or URL, resulting in remote code execution (RCE) on the server. |
| ComfyUI-Impact-Pack is vulnerable to Path Traversal. The issue stems from missing validation of the `image.filename` field in a POST request sent to the `/upload/temp` endpoint added by the extension to the server. This results in writing arbitrary files to the file system which may, under some conditions, result in remote code execution (RCE). |
| ComfyUI-Bmad-Nodes is vulnerable to Code Injection. The issue stems from a validation bypass in the BuildColorRangeHSVAdvanced, FilterContour and FindContour custom nodes. In the entrypoint function to each node, there’s a call to eval which can be triggered by generating a workflow that injects a crafted string into the node. This can result in executing arbitrary code on the server. |
| ComfyUI-Ace-Nodes is vulnerable to Code Injection. The ACE_ExpressionEval node contains an eval() in its entrypoint function that accepts arbitrary user-controlled data. A user can create a workflow that results in executing arbitrary code on the server. |
| CCleaner v5.33.6162 and CCleaner Cloud v1.07.3191 (32-bit builds) contained a malicious pre-entry-point loader that diverts execution from __scrt_common_main_seh into a custom loader. That loader decodes an embedded blob into shellcode, allocates executable heap memory, resolves Windows API functions at runtime, and transfers execution to an in-memory payload. The payload performs anti-analysis checks, gathers host telemetry, encodes the data with a two-stage obfuscation, and attempts HTTPS exfiltration to hard-coded C2 servers or month-based DGA domains. Potential impacts include remote data collection and exfiltration, stealthy in-memory execution and persistence, and potential lateral movement. CCleaner was developed by Piriform, which was acquired by Avast in July 2017; Avast later merged with NortonLifeLock to form the parent company now known as Gen Digital. According to vendor advisories, the compromised CCleaner build was released on August 15, 2017 and remediated on September 12, 2017 with v5.34; the compromised CCleaner Cloud build was released on August 24, 2017 and remediated on September 15, 2017 with v1.07.3214. |
| NetSarang Xmanager Enterprise 5.0 Build 1232, Xmanager 5.0 Build 1045, Xshell 5.0 Build 1322, Xftp 5.0 Build 1218, and Xlpd 5.0 Build 1220 contain a malicious nssock2.dll that implements a multi-stage, DNS-based backdoor. The dormant library contacts a C2 DNS server via a specially crafted TXT record for a month‑generated domain. After receiving a decryption key, it then downloads and executes arbitrary code, creates an encrypted virtual file system (VFS) in the registry, and grants the attacker full remote code execution, data exfiltration, and persistence. NetSarang released builds for each product line that remediated the compromise: Xmanager Enterprise Build 1236, Xmanager Build 1049, Xshell Build 1326, Xftp Build 1222, and Xlpd Build 1224. Kaspersky Lab identified an instance of exploitation in the wild in August 2017. |
| DBLTek GoIP devices (models GoIP 1, 4, 8, 16, and 32) contain an undocumented vendor backdoor in the Telnet administrative interface that allows remote authentication as an undocumented user via a proprietary challenge–response scheme which is fundamentally flawed. Because the challenge response can be computed from the challenge itself, a remote attacker can authenticate without knowledge of a secret and obtain a root shell on the device. This can lead to persistent remote code execution, full device compromise, and arbitrary control of the device and any managed services. The firmware used within these devices was updated in December 2016 to make this vulnerability more complex to exploit. However, it is unknown if DBLTek has taken steps to fully mitigate. |
| FLIR Thermal Camera PT-Series firmware version 8.0.0.64 contains multiple unauthenticated remote command injection vulnerabilities in the controllerFlirSystem.php script. Attackers can execute arbitrary system commands as root by exploiting unsanitized POST parameters in the execFlirSystem() function through shell_exec() calls. Exploitation evidence was observed by the Shadowserver Foundation on 2026-01-06 (UTC). |
| VestaCP commit a3f0fa1 (2018-05-31) up to commit ee03eff (2018-06-13) contain embedded malicious code that resulted in a supply-chain compromise. New installations created from the compromised installer since at least May 2018 were subject to installation of Linux/ChachaDDoS, a multi-stage DDoS bot that uses Lua for second- and third-stage components. The compromise leaked administrative credentials (base64-encoded admin password and server domain) to an external URL during installation and/or resulted in the installer dropping and executing a DDoS malware payload under local system privileges. Compromised servers were subsequently observed participating in large-scale DDoS activity. Vesta acknowledged exploitation in the wild in October 2018. |
| Shenzhen TVT Digital Technology Co., Ltd. NVMS-9000 firmware (used by many white-labeled DVR/NVR/IPC products) contains hardcoded API credentials and an OS command injection flaw in its configuration services. The web/API interface accepts HTTP/XML requests authenticated with a fixed vendor credential string and passes user-controlled fields into shell execution contexts without proper argument sanitization. An unauthenticated remote attacker can leverage the hard-coded credential to access endpoints such as /editBlackAndWhiteList and inject shell metacharacters inside XML parameters, resulting in arbitrary command execution as root. The same vulnerable backend is also reachable in some models through a proprietary TCP service on port 4567 that accepts a magic GUID preface and base64-encoded XML, enabling the same command injection sink. Firmware releases from mid-February 2018 and later are reported to have addressed this issue. Exploitation evidence was observed by the Shadowserver Foundation on 2025-01-28 UTC. |
| SOCA Access Control System 180612 contains multiple SQL injection vulnerabilities that allow attackers to manipulate database queries through unvalidated POST parameters. Attackers can bypass authentication, retrieve password hashes, and gain administrative access with full system privileges by exploiting injection flaws in Login.php and Card_Edit_GetJson.php. |
| Anviz AIM CrossChex Standard 4.3.6.0 contains a CSV injection vulnerability that allows attackers to execute commands by inserting malicious formulas in user import fields. Attackers can craft payloads in fields like 'Name', 'Gender', or 'Position' to trigger Excel macro execution when importing user data. |
| FreeNAS 0.7.2 prior to revision 5543 includes an unauthenticated command‐execution backdoor in its web interface. The exec_raw.php script exposes a cmd parameter that is passed directly to the underlying shell without sanitation. |
| An unauthenticated remote command execution vulnerability exists in AjaXplorer (now known as Pydio Cells) versions prior to 2.6. The flaw resides in the checkInstall.php script within the access.ssh plugin, which fails to properly sanitize user-supplied input to the destServer GET parameter. By injecting shell metacharacters, remote attackers can execute arbitrary system commands on the server with the privileges of the web server process. |
| ContentKeeper Web Appliance (now maintained by Impero Software) versions prior to 125.10 are vulnerable to remote command execution due to insecure handling of file uploads via the mimencode CGI utility. The vulnerability allows unauthenticated attackers to upload and execute arbitrary scripts as the Apache user. Additionally, the exploit can optionally escalate privileges by abusing insecure PATH usage in the benetool binary, resulting in root-level access if successful. |
| Belkin Bulldog Plus version 4.0.2 build 1219 contains a stack-based buffer overflow vulnerability in its web service authentication handler. When a specially crafted HTTP request is sent with an oversized Authorization header, the application fails to properly validate the input length before copying it into a fixed-size buffer, resulting in memory corruption and potential remote code execution. Exploitation requires network access and does not require prior authentication. |
