| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| The BigBlueButton plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the the moderator code and viewer code fields in versions up to, and including, 3.0.0-beta.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers with author privileges or higher to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+) |
| The standard user uses the run as function to start the MEAC applications with administrative privileges. To ensure that the system can startup on its own, the credentials of the administrator were stored. Consequently, the EPC2 user can execute any command with administrative privileges. This allows a privilege escalation to the administrative level. |
| A vulnerability, which was classified as problematic, was found in q2apro q2apro-on-site-notifications up to 1.4.6. This affects the function process_request of the file q2apro-onsitenotifications-page.php. The manipulation leads to cross site scripting. It is possible to initiate the attack remotely. Upgrading to version 1.4.8 is able to address this issue. The patch is named 0ca85ca02f8aceb661e9b71fd229c45d388ea5b5. It is recommended to upgrade the affected component. |
| Ruijie RG-UAC Application Management Gateway contains a command injection vulnerability via the 'nmc_sync.php' interface. An unauthenticated attacker able to reach the affected endpoint can inject shell commands via crafted request data, causing the application to execute arbitrary commands on the host. Successful exploitation can yield full control of the application process and may lead to system-level access depending on the service privileges. VulnCheck has observed this vulnerability being targeted by the RondoDox botnet campaign. |
| SmartBI V8, V9, and V10 contain an unrestricted file upload vulnerability via the RMIServlet request handling logic. Under certain configurations or usage patterns, attackers can send specially crafted requests that cause the application to perform sensitive operations or execute arbitrary code on the host. The vendor released a fix in July 2023 to address the underlying flaw. VulnCheck has observed this vulnerability being exploited in the wild. |
| Sangfor Behavior Management System (also referred to as DC Management System in Chinese-language documentation) contains an XML external entity (XXE) injection vulnerability in the /src/sangforindex endpoint. A remote unauthenticated attacker can submit crafted XML data containing external entity definitions, leading to potential disclosure of internal files, server-side request forgery (SSRF), or other impacts depending on parser behavior. The vulnerability is due to improper configuration of the XML parser, which allows resolution of external entities without restriction. This product is now integrated into their IAM (Internet Access Management) platform and an affected version range is undefined. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-09-06 UTC. |
| A path traversal vulnerability exists in the Dahua Smart Park Integrated Management Platform (also referred to as the Dahua Smart Campus Integrated Management Platform), affecting the SOAP-based GIS bitmap upload interface. The flaw allows unauthenticated remote attackers to upload arbitrary files to the server via crafted SOAP requests, including executable JSP payloads. Successful exploitation may lead to remote code execution (RCE) and full compromise of the affected system. The vulnerability is presumed to affect builds released prior to September 2023 and is said to be remediated in newer versions of the product, though the exact affected range remains undefined. Exploitation evidence was first observed by the Shadowserver Foundation on 2024-02-15 UTC. |
| OpenTelemetry, also known as OTel, is a vendor-neutral open source Observability framework for instrumenting, generating, collecting, and exporting telemetry data such as traces, metrics, and logs. The bearertokenauth extension's server authenticator performs a simple, non-constant time string comparison of the received & configured bearer tokens. This impacts anyone using the `bearertokenauth` server authenticator. Malicious clients with network access to the collector may perform a timing attack against a collector with this authenticator to guess the configured token, by iteratively sending tokens and comparing the response time. This would allow an attacker to introduce fabricated or bad data into the collector's telemetry pipeline. The observable timing vulnerability was fixed by using constant-time comparison in 0.107.0 |
| BYTEVALUE Intelligent Flow Control Router contains a command injection vulnerability via the /goform/webRead/open endpoint. The `path` parameter is not properly validated and is echoed into a shell context, allowing an attacker to inject and execute arbitrary shell commands on the device. Successful exploitation can lead to writing backdoors, privilege escalation on the host, and full compromise of the router and its management functions. VulnCheck has observed this vulnerability being targeted by the RondoDox botnet campaign. |
| hb.exe in TSplus Remote Access before 17.30 2024-10-30 allows remote attackers to retrieve a list of all domain accounts currently connected to the application. |
| A local privilege escalation vulnerability in the Intercept X for Windows installer prior version 1.22 can lead to a local user gaining system level privileges, if the installer is run as SYSTEM. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - request reserved interrupt for virtual function
The device interrupt vector 3 is an error interrupt for
physical function and a reserved interrupt for virtual function.
However, the driver has not registered the reserved interrupt for
virtual function. When allocating interrupts, the number of interrupts
is allocated based on powers of two, which includes this interrupt.
When the system enables GICv4 and the virtual function passthrough
to the virtual machine, releasing the interrupt in the driver
triggers a warning.
The WARNING report is:
WARNING: CPU: 62 PID: 14889 at arch/arm64/kvm/vgic/vgic-its.c:852 its_free_ite+0x94/0xb4
Therefore, register a reserved interrupt for VF and set the
IRQF_NO_AUTOEN flag to avoid that warning. |
| Ruijie NBR series routers contain an unauthenticated arbitrary file upload vulnerability via /ddi/server/fileupload.php. The endpoint accepts attacker-supplied values in the name and uploadDir parameters and saves the provided multipart file content without adequate validation or sanitization of file type, path, or extension. A remote attacker can upload a crafted PHP file and then access it from the web root, resulting in arbitrary code execution in the context of the web service. Exploitation evidence was observed by the Shadowserver Foundation on 2025-01-14 UTC. |
| The Spotify app 8.9.58 for iOS has a buffer overflow in its use of strcat. |
| A vulnerability was detected in PKrystian Full-Stack-Bank up to bf73a0179e3ff07c0d7dc35297cea0be0e5b1317. This vulnerability affects unknown code of the component User Handler. Performing manipulation results in sql injection. It is possible to initiate the attack remotely. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The patch is named 25c9965a872c704f3a9475488dc5d3196902199a. It is suggested to install a patch to address this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast
syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb.
This is the sequence of events that leads to the warning:
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb);
}
rtl8150_set_multicast() {
netif_stop_queue();
netif_wake_queue(); <-- wakes up TX queue before URB is done
}
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb); <-- double submission
}
rtl8150_set_multicast being the ndo_set_rx_mode callback should not be
calling netif_stop_queue and notif_start_queue as these handle
TX queue synchronization.
The net core function dev_set_rx_mode handles the synchronization
for rtl8150_set_multicast making it safe to remove these locks. |
| GraphQL Java (aka graphql-java) before 21.5 does not properly consider ExecutableNormalizedFields (ENFs) as part of preventing denial of service via introspection queries. 20.9 and 19.11 are also fixed versions. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: make sure the cdev fd is still active before emitting events
With the final call to fput() on a file descriptor, the release action
may be deferred and scheduled on a work queue. The reference count of
that descriptor is still zero and it must not be used. It's possible
that a GPIO change, we want to notify the user-space about, happens
AFTER the reference count on the file descriptor associated with the
character device went down to zero but BEFORE the .release() callback
was called from the workqueue and so BEFORE we unregistered from the
notifier.
Using the regular get_file() routine in this situation triggers the
following warning:
struct file::f_count incremented from zero; use-after-free condition present!
So use the get_file_active() variant that will return NULL on file
descriptors that have been or are being released. |
