| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Fix use-after-free in tipc_mon_reinit_self().
syzbot reported use-after-free of tipc_net(net)->monitors[]
in tipc_mon_reinit_self(). [0]
The array is protected by RTNL, but tipc_mon_reinit_self()
iterates over it without RTNL.
tipc_mon_reinit_self() is called from tipc_net_finalize(),
which is always under RTNL except for tipc_net_finalize_work().
Let's hold RTNL in tipc_net_finalize_work().
[0]:
BUG: KASAN: slab-use-after-free in __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162
Read of size 1 at addr ffff88805eae1030 by task kworker/0:7/5989
CPU: 0 UID: 0 PID: 5989 Comm: kworker/0:7 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Workqueue: events tipc_net_finalize_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
__kasan_check_byte+0x2a/0x40 mm/kasan/common.c:568
kasan_check_byte include/linux/kasan.h:399 [inline]
lock_acquire+0x8d/0x360 kernel/locking/lockdep.c:5842
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162
rtlock_slowlock kernel/locking/rtmutex.c:1894 [inline]
rwbase_rtmutex_lock_state kernel/locking/spinlock_rt.c:160 [inline]
rwbase_write_lock+0xd3/0x7e0 kernel/locking/rwbase_rt.c:244
rt_write_lock+0x76/0x110 kernel/locking/spinlock_rt.c:243
write_lock_bh include/linux/rwlock_rt.h:99 [inline]
tipc_mon_reinit_self+0x79/0x430 net/tipc/monitor.c:718
tipc_net_finalize+0x115/0x190 net/tipc/net.c:140
process_one_work kernel/workqueue.c:3236 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3319
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3400
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x439/0x7d0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 6089:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:388 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:405
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x1a8/0x320 mm/slub.c:4407
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
tipc_mon_create+0xc3/0x4d0 net/tipc/monitor.c:657
tipc_enable_bearer net/tipc/bearer.c:357 [inline]
__tipc_nl_bearer_enable+0xe16/0x13f0 net/tipc/bearer.c:1047
__tipc_nl_compat_doit net/tipc/netlink_compat.c:371 [inline]
tipc_nl_compat_doit+0x3bc/0x5f0 net/tipc/netlink_compat.c:393
tipc_nl_compat_handle net/tipc/netlink_compat.c:-1 [inline]
tipc_nl_compat_recv+0x83c/0xbe0 net/tipc/netlink_compat.c:1321
genl_family_rcv_msg_doit+0x215/0x300 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x60e/0x790 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x846/0xa10 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:729
____sys_sendmsg+0x508/0x820 net/socket.c:2614
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668
__sys_sendmsg net/socket.c:2700 [inline]
__do_sys_sendmsg net/socket.c:2705 [inline]
__se_sys_sendmsg net/socket.c:2703 [inline]
__x64_sys_sendmsg+0x1a1/0x260 net/socket.c:2703
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: prevent possible shift-out-of-bounds in sctp_transport_update_rto
syzbot reported a possible shift-out-of-bounds [1]
Blamed commit added rto_alpha_max and rto_beta_max set to 1000.
It is unclear if some sctp users are setting very large rto_alpha
and/or rto_beta.
In order to prevent user regression, perform the test at run time.
Also add READ_ONCE() annotations as sysctl values can change under us.
[1]
UBSAN: shift-out-of-bounds in net/sctp/transport.c:509:41
shift exponent 64 is too large for 32-bit type 'unsigned int'
CPU: 0 UID: 0 PID: 16704 Comm: syz.2.2320 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:233 [inline]
__ubsan_handle_shift_out_of_bounds+0x27f/0x420 lib/ubsan.c:494
sctp_transport_update_rto.cold+0x1c/0x34b net/sctp/transport.c:509
sctp_check_transmitted+0x11c4/0x1c30 net/sctp/outqueue.c:1502
sctp_outq_sack+0x4ef/0x1b20 net/sctp/outqueue.c:1338
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:840 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1372 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: reset link-local header on ipv6 recv path
Bluetooth 6lowpan.c netdev has header_ops, so it must set link-local
header for RX skb, otherwise things crash, eg. with AF_PACKET SOCK_RAW
Add missing skb_reset_mac_header() for uncompressed ipv6 RX path.
For the compressed one, it is done in lowpan_header_decompress().
Log: (BlueZ 6lowpan-tester Client Recv Raw - Success)
------
kernel BUG at net/core/skbuff.c:212!
Call Trace:
<IRQ>
...
packet_rcv (net/packet/af_packet.c:2152)
...
<TASK>
__local_bh_enable_ip (kernel/softirq.c:407)
netif_rx (net/core/dev.c:5648)
chan_recv_cb (net/bluetooth/6lowpan.c:294 net/bluetooth/6lowpan.c:359)
------ |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix null pointer dereference in bnxt_bs_trace_check_wrap()
With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER
for FW trace data type that has not been initialized. This will result
in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a
valid magic_byte pointer before proceeding. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: cancel mesh send timer when hdev removed
mesh_send_done timer is not canceled when hdev is removed, which causes
crash if the timer triggers after hdev is gone.
Cancel the timer when MGMT removes the hdev, like other MGMT timers.
Should fix the BUG: sporadically seen by BlueZ test bot
(in "Mesh - Send cancel - 1" test).
Log:
------
BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0
...
Freed by task 36:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x43/0x70
kfree+0x103/0x500
device_release+0x9a/0x210
kobject_put+0x100/0x1e0
vhci_release+0x18b/0x240
------ |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix possible memory leak in smb2_read()
Memory leak occurs when ksmbd_vfs_read() fails.
Fix this by adding the missing kvfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: avoid data corruption on cq descriptor number
Since commit 30f241fcf52a ("xsk: Fix immature cq descriptor
production"), the descriptor number is stored in skb control block and
xsk_cq_submit_addr_locked() relies on it to put the umem addrs onto
pool's completion queue.
skb control block shouldn't be used for this purpose as after transmit
xsk doesn't have control over it and other subsystems could use it. This
leads to the following kernel panic due to a NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 1 PID: 927 Comm: p4xsk.bin Not tainted 6.16.12+deb14-cloud-amd64 #1 PREEMPT(lazy) Debian 6.16.12-1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:xsk_destruct_skb+0xd0/0x180
[...]
Call Trace:
<IRQ>
? napi_complete_done+0x7a/0x1a0
ip_rcv_core+0x1bb/0x340
ip_rcv+0x30/0x1f0
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0x87/0x130
__napi_poll+0x28/0x180
net_rx_action+0x339/0x420
handle_softirqs+0xdc/0x320
? handle_edge_irq+0x90/0x1e0
do_softirq.part.0+0x3b/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x60/0x70
__dev_direct_xmit+0x14e/0x1f0
__xsk_generic_xmit+0x482/0xb70
? __remove_hrtimer+0x41/0xa0
? __xsk_generic_xmit+0x51/0xb70
? _raw_spin_unlock_irqrestore+0xe/0x40
xsk_sendmsg+0xda/0x1c0
__sys_sendto+0x1ee/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x84/0x2f0
? __pfx_pollwake+0x10/0x10
? __rseq_handle_notify_resume+0xad/0x4c0
? restore_fpregs_from_fpstate+0x3c/0x90
? switch_fpu_return+0x5b/0xe0
? do_syscall_64+0x204/0x2f0
? do_syscall_64+0x204/0x2f0
? do_syscall_64+0x204/0x2f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[...]
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x1c000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Instead use the skb destructor_arg pointer along with pointer tagging.
As pointers are always aligned to 8B, use the bottom bit to indicate
whether this a single address or an allocated struct containing several
addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix regbuf vector size truncation
There is a report of io_estimate_bvec_size() truncating the calculated
number of segments that leads to corruption issues. Check it doesn't
overflow "int"s used later. Rough but simple, can be improved on top. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
When simulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, an error trace appears during
partition table reading at boot time. The issue is caused by
inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left
shift of -1 and triggering a UBSAN warning.
[ 2.697306] ------------[ cut here ]------------
[ 2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37
[ 2.697311] shift exponent -1 is negative
[ 2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary)
[ 2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 2.697320] Call Trace:
[ 2.697324] <TASK>
[ 2.697325] dump_stack_lvl+0x76/0xa0
[ 2.697340] dump_stack+0x10/0x20
[ 2.697342] __ubsan_handle_shift_out_of_bounds+0x1e3/0x390
[ 2.697351] bh_get_inode_and_lblk_num.cold+0x12/0x94
[ 2.697359] fscrypt_set_bio_crypt_ctx_bh+0x44/0x90
[ 2.697365] submit_bh_wbc+0xb6/0x190
[ 2.697370] block_read_full_folio+0x194/0x270
[ 2.697371] ? __pfx_blkdev_get_block+0x10/0x10
[ 2.697375] ? __pfx_blkdev_read_folio+0x10/0x10
[ 2.697377] blkdev_read_folio+0x18/0x30
[ 2.697379] filemap_read_folio+0x40/0xe0
[ 2.697382] filemap_get_pages+0x5ef/0x7a0
[ 2.697385] ? mmap_region+0x63/0xd0
[ 2.697389] filemap_read+0x11d/0x520
[ 2.697392] blkdev_read_iter+0x7c/0x180
[ 2.697393] vfs_read+0x261/0x390
[ 2.697397] ksys_read+0x71/0xf0
[ 2.697398] __x64_sys_read+0x19/0x30
[ 2.697399] x64_sys_call+0x1e88/0x26a0
[ 2.697405] do_syscall_64+0x80/0x670
[ 2.697410] ? __x64_sys_newfstat+0x15/0x20
[ 2.697414] ? x64_sys_call+0x204a/0x26a0
[ 2.697415] ? do_syscall_64+0xb8/0x670
[ 2.697417] ? irqentry_exit_to_user_mode+0x2e/0x2a0
[ 2.697420] ? irqentry_exit+0x43/0x50
[ 2.697421] ? exc_page_fault+0x90/0x1b0
[ 2.697422] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 2.697425] RIP: 0033:0x75054cba4a06
[ 2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[ 2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
[ 2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06
[ 2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b
[ 2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000
[ 2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0
[ 2.697436] </TASK>
[ 2.697436] ---[ end trace ]---
This situation can happen for block devices because when
CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size
is 64 KiB. set_init_blocksize() then sets the block device
inode->i_blkbits to 13, which is within this limit.
File I/O does not trigger this problem because for filesystems that do
not support the FS_LBS feature, sb_set_blocksize() prevents
sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode
allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits
from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS
flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not
hit the left-shift underflow issue.
[EB: use folio_pos() and consolidate the two shifts by i_blkbits] |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c4b (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ctcm: Fix double-kfree
The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally
from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.
After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'
frees it again.
Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.
Bug detected by the clang static analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Ignore signal/timeout on connect() if already established
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/
[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/
[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/ |
| In the Linux kernel, the following vulnerability has been resolved:
most: usb: Fix use-after-free in hdm_disconnect
hdm_disconnect() calls most_deregister_interface(), which eventually
unregisters the MOST interface device with device_unregister(iface->dev).
If that drops the last reference, the device core may call release_mdev()
immediately while hdm_disconnect() is still executing.
The old code also freed several mdev-owned allocations in
hdm_disconnect() and then performed additional put_device() calls.
Depending on refcount order, this could lead to use-after-free or
double-free when release_mdev() ran (or when unregister paths also
performed puts).
Fix by moving the frees of mdev-owned allocations into release_mdev(),
so they happen exactly once when the device is truly released, and by
dropping the extra put_device() calls in hdm_disconnect() that are
redundant after device_unregister() and most_deregister_interface().
This addresses the KASAN slab-use-after-free reported by syzbot in
hdm_disconnect(). See report and stack traces in the bug link below. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (cgbc-hwmon) Add missing NULL check after devm_kzalloc()
The driver allocates memory for sensor data using devm_kzalloc(), but
did not check if the allocation succeeded. In case of memory allocation
failure, dereferencing the NULL pointer would lead to a kernel crash.
Add a NULL pointer check and return -ENOMEM to handle allocation failure
properly. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: fix lock inversion in vsock_assign_transport()
Syzbot reported a potential lock inversion deadlock between
vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called.
The issue was introduced by commit 687aa0c5581b ("vsock: Fix
transport_* TOCTOU") which added vsock_register_mutex locking in
vsock_assign_transport() around the transport->release() call, that can
call vsock_linger(). vsock_assign_transport() can be called with sk_lock
held. vsock_linger() calls sk_wait_event() that temporarily releases and
re-acquires sk_lock. During this window, if another thread hold
vsock_register_mutex while trying to acquire sk_lock, a circular
dependency is created.
Fix this by releasing vsock_register_mutex before calling
transport->release() and vsock_deassign_transport(). This is safe
because we don't need to hold vsock_register_mutex while releasing the
old transport, and we ensure the new transport won't disappear by
obtaining a module reference first via try_module_get(). |
| In the Linux kernel, the following vulnerability has been resolved:
rv: Fully convert enabled_monitors to use list_head as iterator
The callbacks in enabled_monitors_seq_ops are inconsistent. Some treat the
iterator as struct rv_monitor *, while others treat the iterator as struct
list_head *.
This causes a wrong type cast and crashes the system as reported by Nathan.
Convert everything to use struct list_head * as iterator. This also makes
enabled_monitors consistent with available_monitors. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: zero unused hash fields
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix crafted invalid cases for encoded extents
Robert recently reported two corrupted images that can cause system
crashes, which are related to the new encoded extents introduced
in Linux 6.15:
- The first one [1] has plen != 0 (e.g. plen == 0x2000000) but
(plen & Z_EROFS_EXTENT_PLEN_MASK) == 0. It is used to represent
special extents such as sparse extents (!EROFS_MAP_MAPPED), but
previously only plen == 0 was handled;
- The second one [2] has pa 0xffffffffffdcffed and plen 0xb4000,
then "cur [0xfffffffffffff000] += bvec.bv_len [0x1000]" in
"} while ((cur += bvec.bv_len) < end);" wraps around, causing an
out-of-bound access of pcl->compressed_bvecs[] in
z_erofs_submit_queue(). EROFS only supports 48-bit physical block
addresses (up to 1EiB for 4k blocks), so add a sanity check to
enforce this. |
| In the Linux kernel, the following vulnerability has been resolved:
nios2: ensure that memblock.current_limit is set when setting pfn limits
On nios2, with CONFIG_FLATMEM set, the kernel relies on
memblock_get_current_limit() to determine the limits of mem_map, in
particular for max_low_pfn.
Unfortunately, memblock.current_limit is only default initialized to
MEMBLOCK_ALLOC_ANYWHERE at this point of the bootup, potentially leading
to situations where max_low_pfn can erroneously exceed the value of
max_pfn and, thus, the valid range of available DRAM.
This can in turn cause kernel-level paging failures, e.g.:
[ 76.900000] Unable to handle kernel paging request at virtual address 20303000
[ 76.900000] ea = c0080890, ra = c000462c, cause = 14
[ 76.900000] Kernel panic - not syncing: Oops
[ 76.900000] ---[ end Kernel panic - not syncing: Oops ]---
This patch fixes this by pre-calculating memblock.current_limit
based on the upper limits of the available memory ranges via
adjust_lowmem_bounds, a simplified version of the equivalent
implementation within the arm architecture. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: skcipher - Fix reqsize handling
Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg")
introduced cra_reqsize field in crypto_alg struct to replace type
specific reqsize fields. It looks like this was introduced specifically
for ahash and acomp from the commit description as subsequent commits
add necessary changes in these alg frameworks.
However, this is being recommended for use in all crypto algs [1]
instead of setting reqsize using crypto_*_set_reqsize(). Using
cra_reqsize in skcipher algorithms, hence, causes memory
corruptions and crashes as the underlying functions in the algorithm
framework have not been updated to set the reqsize properly from
cra_reqsize. [2]
Add proper set_reqsize calls in the skcipher init function to
properly initialize reqsize for these algorithms in the framework.
[1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/
[2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b |
