| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm: zynqmp_dpsub: Always register bridge
We must always register the DRM bridge, since zynqmp_dp_hpd_work_func
calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be
initialized. We do this before zynqmp_dpsub_drm_init since that calls
drm_bridge_attach. This fixes the following lockdep warning:
[ 19.217084] ------------[ cut here ]------------
[ 19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550
[ 19.241696] Modules linked in:
[ 19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96
[ 19.252046] Hardware name: xlnx,zynqmp (DT)
[ 19.256421] Workqueue: events zynqmp_dp_hpd_work_func
[ 19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 19.269104] pc : __mutex_lock+0x4bc/0x550
[ 19.273364] lr : __mutex_lock+0x4bc/0x550
[ 19.277592] sp : ffffffc085c5bbe0
[ 19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8
[ 19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000
[ 19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000
[ 19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000
[ 19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720
[ 19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001
[ 19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888
[ 19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000
[ 19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000
[ 19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880
[ 19.356581] Call trace:
[ 19.359160] __mutex_lock+0x4bc/0x550
[ 19.363032] mutex_lock_nested+0x24/0x30
[ 19.367187] drm_bridge_hpd_notify+0x2c/0x6c
[ 19.371698] zynqmp_dp_hpd_work_func+0x44/0x54
[ 19.376364] process_one_work+0x3ac/0x988
[ 19.380660] worker_thread+0x398/0x694
[ 19.384736] kthread+0x1bc/0x1c0
[ 19.388241] ret_from_fork+0x10/0x20
[ 19.392031] irq event stamp: 183
[ 19.395450] hardirqs last enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4
[ 19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04
[ 19.413612] softirqs last enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c
[ 19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c
[ 19.432614] ---[ end trace 0000000000000000 ]---
(cherry picked from commit 61ba791c4a7a09a370c45b70a81b8c7d4cf6b2ae) |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 15.6 and iPadOS 15.6, macOS Big Sur 11.6.8, watchOS 8.7, tvOS 15.6, macOS Monterey 12.5, Security Update 2022-005 Catalina. An app may be able to leak sensitive user information. |
| An information disclosure vulnerability exists when the Windows kernel improperly initializes objects in memory.
To exploit this vulnerability, an authenticated attacker could run a specially crafted application. An attacker who successfully exploited this vulnerability could obtain information to further compromise the user’s system.
The update addresses the vulnerability by correcting how the Windows kernel initializes objects in memory. |
| Improper initialization in the UEFI firmware for the Intel(R) Server D50DNP and M50FCP boards may allow a privileged user to potentially enable information disclosure via local access. |
| An issue in Bento4 v1.6.0-641 allows an attacker to trigger a segmentation fault via Ap4Atom.cpp, specifically in AP4_AtomParent::RemoveChild, during the execution of mp4encrypt with a specially crafted MP4 input file. |
| Improper initialization in the Intel(R) Data Center Manager software before version 4.1 may allow an authenticated user to potentially enable denial of service via local access. |
| pgjdbc is the offical PostgreSQL JDBC Driver. A security hole was found in the jdbc driver for postgresql database while doing security research. The system using the postgresql library will be attacked when attacker control the jdbc url or properties. pgjdbc instantiates plugin instances based on class names provided via `authenticationPluginClassName`, `sslhostnameverifier`, `socketFactory`, `sslfactory`, `sslpasswordcallback` connection properties. However, the driver did not verify if the class implements the expected interface before instantiating the class. This can lead to code execution loaded via arbitrary classes. Users using plugins are advised to upgrade. There are no known workarounds for this issue. |
| Improper initialization for some Intel(R) PROSet/Wireless WiFi and Killer(TM) WiFi products may allow a privileged user to potentially enable escalation of privilege via local access. |
| Improper initialization of shared resources in some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. |
| Improper initialization in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via physical access. |
| Improper initialization in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via physical access. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix accesses to uninit stack slots
Privileged programs are supposed to be able to read uninitialized stack
memory (ever since 6715df8d5) but, before this patch, these accesses
were permitted inconsistently. In particular, accesses were permitted
above state->allocated_stack, but not below it. In other words, if the
stack was already "large enough", the access was permitted, but
otherwise the access was rejected instead of being allowed to "grow the
stack". This undesired rejection was happening in two places:
- in check_stack_slot_within_bounds()
- in check_stack_range_initialized()
This patch arranges for these accesses to be permitted. A bunch of tests
that were relying on the old rejection had to change; all of them were
changed to add also run unprivileged, in which case the old behavior
persists. One tests couldn't be updated - global_func16 - because it
can't run unprivileged for other reasons.
This patch also fixes the tracking of the stack size for variable-offset
reads. This second fix is bundled in the same commit as the first one
because they're inter-related. Before this patch, writes to the stack
using registers containing a variable offset (as opposed to registers
with fixed, known values) were not properly contributing to the
function's needed stack size. As a result, it was possible for a program
to verify, but then to attempt to read out-of-bounds data at runtime
because a too small stack had been allocated for it.
Each function tracks the size of the stack it needs in
bpf_subprog_info.stack_depth, which is maintained by
update_stack_depth(). For regular memory accesses, check_mem_access()
was calling update_state_depth() but it was passing in only the fixed
part of the offset register, ignoring the variable offset. This was
incorrect; the minimum possible value of that register should be used
instead.
This tracking is now fixed by centralizing the tracking of stack size in
grow_stack_state(), and by lifting the calls to grow_stack_state() to
check_stack_access_within_bounds() as suggested by Andrii. The code is
now simpler and more convincingly tracks the correct maximum stack size.
check_stack_range_initialized() can now rely on enough stack having been
allocated for the access; this helps with the fix for the first issue.
A few tests were changed to also check the stack depth computation. The
one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Move flush_work initialization out of if block
After commit 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a
work queue"), it can happen that a work item is sent to an uninitialized
work queue. This may has the effect that the item being queued is never
actually queued, and any further actions depending on it will not
proceed.
The following warning is observed while the fnic driver is loaded:
kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410
kernel: <IRQ>
kernel: queue_work_on+0x3a/0x50
kernel: fnic_wq_copy_cmpl_handler+0x54a/0x730 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: fnic_isr_msix_wq_copy+0x2d/0x60 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: __handle_irq_event_percpu+0x36/0x1a0
kernel: handle_irq_event_percpu+0x30/0x70
kernel: handle_irq_event+0x34/0x60
kernel: handle_edge_irq+0x7e/0x1a0
kernel: __common_interrupt+0x3b/0xb0
kernel: common_interrupt+0x58/0xa0
kernel: </IRQ>
It has been observed that this may break the rediscovery of Fibre
Channel devices after a temporary fabric failure.
This patch fixes it by moving the work queue initialization out of
an if block in fnic_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: ensure that nfsd4_fattr_args.context is zeroed out
If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to
checking for the security label, then args.context will be set to
uninitialized junk on the stack, which we'll then try to free.
Initialize it early. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: fix validity interception issue when gisa is switched off
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).
The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.
To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.
The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.
kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4
000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70
#000003d93deb011e: af000000 mc 0,0
>000003d93deb0122: a728ffea lhi %r2,-22
000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e
000003d93deb012a: 9101f0b0 tm 176(%r15),1
000003d93deb012e: a774fe48 brc 7,000003d93deafdbe
000003d93deb0132: 40a0f0ae sth %r10,174(%r15)
Call Trace:
[<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
[<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
[<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
[<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
[<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
[<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
[<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
[<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
[<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: initialise nfsd_info.mutex early.
nfsd_info.mutex can be dereferenced by svc_pool_stats_start()
immediately after the new netns is created. Currently this can
trigger an oops.
Move the initialisation earlier before it can possibly be dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't attempt to schedule hpd_work on headless cards
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l: async: Properly re-initialise notifier entry in unregister
The notifier_entry of a notifier is not re-initialised after unregistering
the notifier. This leads to dangling pointers being left there so use
list_del_init() to return the notifier_entry an empty list. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix uninit-value in p9_client_rpc()
Syzbot with the help of KMSAN reported the following error:
BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline]
BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754
trace_9p_client_res include/trace/events/9p.h:146 [inline]
p9_client_rpc+0x1314/0x1340 net/9p/client.c:754
p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031
v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410
v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122
legacy_get_tree+0x114/0x290 fs/fs_context.c:662
vfs_get_tree+0xa7/0x570 fs/super.c:1797
do_new_mount+0x71f/0x15e0 fs/namespace.c:3352
path_mount+0x742/0x1f20 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount+0x725/0x810 fs/namespace.c:3875
__x64_sys_mount+0xe4/0x150 fs/namespace.c:3875
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
__alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
alloc_slab_page mm/slub.c:2175 [inline]
allocate_slab mm/slub.c:2338 [inline]
new_slab+0x2de/0x1400 mm/slub.c:2391
___slab_alloc+0x1184/0x33d0 mm/slub.c:3525
__slab_alloc mm/slub.c:3610 [inline]
__slab_alloc_node mm/slub.c:3663 [inline]
slab_alloc_node mm/slub.c:3835 [inline]
kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852
p9_tag_alloc net/9p/client.c:278 [inline]
p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641
p9_client_rpc+0x27e/0x1340 net/9p/client.c:688
p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031
v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410
v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122
legacy_get_tree+0x114/0x290 fs/fs_context.c:662
vfs_get_tree+0xa7/0x570 fs/super.c:1797
do_new_mount+0x71f/0x15e0 fs/namespace.c:3352
path_mount+0x742/0x1f20 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount+0x725/0x810 fs/namespace.c:3875
__x64_sys_mount+0xe4/0x150 fs/namespace.c:3875
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag
will not be properly initialized. However, trace_9p_client_res()
ends up trying to print it out anyway before p9_client_rpc()
finishes.
Fix this issue by assigning default values to p9_fcall fields
such as 'tag' and (just in case KMSAN unearths something new) 'id'
during the tag allocation stage. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate slices count returned by FW
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW. |
