| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
listmount: don't call path_put() under namespace semaphore
Massage listmount() and make sure we don't call path_put() under the
namespace semaphore. If we put the last reference we're fscked. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: avoid potential out-of-bounds in btrfs_encode_fh()
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
I've found that pynfs COMP6 now leaves the connection or lease in a
strange state, which causes CLOSE9 to hang indefinitely. I've dug
into it a little, but I haven't been able to root-cause it yet.
However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on
number of operations per NFSv4 COMPOUND").
Tianshuo Han also reports a potential vulnerability when decoding
an NFSv4 COMPOUND. An attacker can place an arbitrarily large op
count in the COMPOUND header, which results in:
[ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total
pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO),
nodemask=(null),cpuset=/,mems_allowed=0
when NFSD attempts to allocate the COMPOUND op array.
Let's restore the operation-per-COMPOUND limit, but increased to 200
for now. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix refcount leak in nfsd_set_fh_dentry()
nfsd exports a "pseudo root filesystem" which is used by NFSv4 to find
the various exported filesystems using LOOKUP requests from a known root
filehandle. NFSv3 uses the MOUNT protocol to find those exported
filesystems and so is not given access to the pseudo root filesystem.
If a v3 (or v2) client uses a filehandle from that filesystem,
nfsd_set_fh_dentry() will report an error, but still stores the export
in "struct svc_fh" even though it also drops the reference (exp_put()).
This means that when fh_put() is called an extra reference will be dropped
which can lead to use-after-free and possible denial of service.
Normal NFS usage will not provide a pseudo-root filehandle to a v3
client. This bug can only be triggered by the client synthesising an
incorrect filehandle.
To fix this we move the assignments to the svc_fh later, after all
possible error cases have been detected. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Initialise scc_index in unix_add_edge().
Quang Le reported that the AF_UNIX GC could garbage-collect a
receive queue of an alive in-flight socket, with a nice repro.
The repro consists of three stages.
1)
1-a. Create a single cyclic reference with many sockets
1-b. close() all sockets
1-c. Trigger GC
2)
2-a. Pass sk-A to an embryo sk-B
2-b. Pass sk-X to sk-X
2-c. Trigger GC
3)
3-a. accept() the embryo sk-B
3-b. Pass sk-B to sk-C
3-c. close() the in-flight sk-A
3-d. Trigger GC
As of 2-c, sk-A and sk-X are linked to unix_unvisited_vertices,
and unix_walk_scc() groups them into two different SCCs:
unix_sk(sk-A)->vertex->scc_index = 2 (UNIX_VERTEX_INDEX_START)
unix_sk(sk-X)->vertex->scc_index = 3
Once GC completes, unix_graph_grouped is set to true.
Also, unix_graph_maybe_cyclic is set to true due to sk-X's
cyclic self-reference, which makes close() trigger GC.
At 3-b, unix_add_edge() allocates unix_sk(sk-B)->vertex and
links it to unix_unvisited_vertices.
unix_update_graph() is called at 3-a. and 3-b., but neither
unix_graph_grouped nor unix_graph_maybe_cyclic is changed
because both sk-B's listener and sk-C are not in-flight.
3-c decrements sk-A's file refcnt to 1.
Since unix_graph_grouped is true at 3-d, unix_walk_scc_fast()
is finally called and iterates 3 sockets sk-A, sk-B, and sk-X:
sk-A -> sk-B (-> sk-C)
sk-X -> sk-X
This is totally fine. All of them are not yet close()d and
should be grouped into different SCCs.
However, unix_vertex_dead() misjudges that sk-A and sk-B are
in the same SCC and sk-A is dead.
unix_sk(sk-A)->scc_index == unix_sk(sk-B)->scc_index <-- Wrong!
&&
sk-A's file refcnt == unix_sk(sk-A)->vertex->out_degree
^-- 1 in-flight count for sk-B
-> sk-A is dead !?
The problem is that unix_add_edge() does not initialise scc_index.
Stage 1) is used for heap spraying, making a newly allocated
vertex have vertex->scc_index == 2 (UNIX_VERTEX_INDEX_START)
set by unix_walk_scc() at 1-c.
Let's track the max SCC index from the previous unix_walk_scc()
call and assign the max + 1 to a new vertex's scc_index.
This way, we can continue to avoid Tarjan's algorithm while
preventing misjudgments. |
| In the Linux kernel, the following vulnerability has been resolved:
pidfs: validate extensible ioctls
Validate extensible ioctls stricter than we do now. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Fix race between SR-IOV enable/disable and hotplug
Commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when
enabling/disabling SR-IOV") tried to fix a race between the VF removal
inside sriov_del_vfs() and concurrent hot unplug by taking the PCI
rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock
was also taken in sriov_add_vfs() to protect addition of VFs.
This approach however causes deadlock on trying to remove PFs with SR-IOV
enabled because PFs disable SR-IOV during removal and this removal happens
under the PCI rescan/remove lock. So the original fix had to be reverted.
Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and
sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs
hotplug higher up in the callchain by taking the lock in
sriov_numvfs_store() before calling into the driver's sriov_configure()
callback. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix null pointer dereference on zero-length checksum
In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes
checksum.data to be set to NULL. This triggers a NPD when accessing
checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that
the value of checksum.len is not less than XDR_UNIT. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix data race in CPU latency PM QoS request handling
The cpu_latency_qos_add/remove/update_request interfaces lack internal
synchronization by design, requiring the caller to ensure thread safety.
The current implementation relies on the 'pm_qos_enabled' flag, which is
insufficient to prevent concurrent access and cannot serve as a proper
synchronization mechanism. This has led to data races and list
corruption issues.
A typical race condition call trace is:
[Thread A]
ufshcd_pm_qos_exit()
--> cpu_latency_qos_remove_request()
--> cpu_latency_qos_apply();
--> pm_qos_update_target()
--> plist_del <--(1) delete plist node
--> memset(req, 0, sizeof(*req));
--> hba->pm_qos_enabled = false;
[Thread B]
ufshcd_devfreq_target
--> ufshcd_devfreq_scale
--> ufshcd_scale_clks
--> ufshcd_pm_qos_update <--(2) pm_qos_enabled is true
--> cpu_latency_qos_update_request
--> pm_qos_update_target
--> plist_del <--(3) plist node use-after-free
Introduces a dedicated mutex to serialize PM QoS operations, preventing
data races and ensuring safe access to PM QoS resources, including sysfs
interface reads. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback
In create_sdw_dailink() check that sof_end->codec_info->add_sidecar
is not NULL before calling it.
The original code assumed that if include_sidecar is true, the codec
on that link has an add_sidecar callback. But there could be other
codecs on the same link that do not have an add_sidecar callback. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix kvm_device leak in kvm_pch_pic_destroy()
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_pch_pic_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix kvm_device leak in kvm_ipi_destroy()
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_ipi_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix kvm_device leak in kvm_eiointc_destroy()
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_eiointc_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()
The for_each_available_child_of_node() calls of_node_put() to
release child_np in each success loop. After breaking from the
loop with the child_np has been released, the code will jump to
the put_child label and will call the of_node_put() again if the
devm_request_threaded_irq() fails. These cause a double free bug.
Fix by returning directly to avoid the duplicate of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: release path before iget_failed() in btrfs_read_locked_inode()
In btrfs_read_locked_inode() if we fail to lookup the inode, we jump to
the 'out' label with a path that has a read locked leaf and then we call
iget_failed(). This can result in a ABBA deadlock, since iget_failed()
triggers inode eviction and that causes the release of the delayed inode,
which must lock the delayed inode's mutex, and a task updating a delayed
inode starts by taking the node's mutex and then modifying the inode's
subvolume btree.
Syzbot reported the following lockdep splat for this:
======================================================
WARNING: possible circular locking dependency detected
syzkaller #0 Not tainted
------------------------------------------------------
btrfs-cleaner/8725 is trying to acquire lock:
ffff0000d6826a48 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0xa0/0x9b0 fs/btrfs/delayed-inode.c:290
but task is already holding lock:
ffff0000dbeba878 (btrfs-tree-00){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x44/0x2ec fs/btrfs/locking.c:145
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-tree-00){++++}-{4:4}:
__lock_release kernel/locking/lockdep.c:5574 [inline]
lock_release+0x198/0x39c kernel/locking/lockdep.c:5889
up_read+0x24/0x3c kernel/locking/rwsem.c:1632
btrfs_tree_read_unlock+0xdc/0x298 fs/btrfs/locking.c:169
btrfs_tree_unlock_rw fs/btrfs/locking.h:218 [inline]
btrfs_search_slot+0xa6c/0x223c fs/btrfs/ctree.c:2133
btrfs_lookup_inode+0xd8/0x38c fs/btrfs/inode-item.c:395
__btrfs_update_delayed_inode+0x124/0xed0 fs/btrfs/delayed-inode.c:1032
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1118 [inline]
__btrfs_commit_inode_delayed_items+0x15f8/0x1748 fs/btrfs/delayed-inode.c:1141
__btrfs_run_delayed_items+0x1ac/0x514 fs/btrfs/delayed-inode.c:1176
btrfs_run_delayed_items_nr+0x28/0x38 fs/btrfs/delayed-inode.c:1219
flush_space+0x26c/0xb68 fs/btrfs/space-info.c:828
do_async_reclaim_metadata_space+0x110/0x364 fs/btrfs/space-info.c:1158
btrfs_async_reclaim_metadata_space+0x90/0xd8 fs/btrfs/space-info.c:1226
process_one_work+0x7e8/0x155c kernel/workqueue.c:3263
process_scheduled_works kernel/workqueue.c:3346 [inline]
worker_thread+0x958/0xed8 kernel/workqueue.c:3427
kthread+0x5fc/0x75c kernel/kthread.c:463
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:844
-> #0 (&delayed_node->mutex){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x1774/0x30a4 kernel/locking/lockdep.c:5237
lock_acquire+0x14c/0x2e0 kernel/locking/lockdep.c:5868
__mutex_lock_common+0x1d0/0x2678 kernel/locking/mutex.c:598
__mutex_lock kernel/locking/mutex.c:760 [inline]
mutex_lock_nested+0x2c/0x38 kernel/locking/mutex.c:812
__btrfs_release_delayed_node+0xa0/0x9b0 fs/btrfs/delayed-inode.c:290
btrfs_release_delayed_node fs/btrfs/delayed-inode.c:315 [inline]
btrfs_remove_delayed_node+0x68/0x84 fs/btrfs/delayed-inode.c:1326
btrfs_evict_inode+0x578/0xe28 fs/btrfs/inode.c:5587
evict+0x414/0x928 fs/inode.c:810
iput_final fs/inode.c:1914 [inline]
iput+0x95c/0xad4 fs/inode.c:1966
iget_failed+0xec/0x134 fs/bad_inode.c:248
btrfs_read_locked_inode+0xe1c/0x1234 fs/btrfs/inode.c:4101
btrfs_iget+0x1b0/0x264 fs/btrfs/inode.c:5837
btrfs_run_defrag_inode fs/btrfs/defrag.c:237 [inline]
btrfs_run_defrag_inodes+0x520/0xdc4 fs/btrf
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: Use __sk_dst_get() and dst_dev_rcu() in mptcp_active_enable().
mptcp_active_enable() is called from subflow_finish_connect(),
which is icsk->icsk_af_ops->sk_rx_dst_set() and it's not always
under RCU.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix aux device unplugging when rdma is not supported by vport
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: fix device mismatch in devm_kzalloc/devm_kfree
Initial rss_hdr allocation uses virtio_device->device,
but virtnet_set_queues() frees using net_device->device.
This device mismatch causing below devres warning
[ 3788.514041] ------------[ cut here ]------------
[ 3788.514044] WARNING: drivers/base/devres.c:1095 at devm_kfree+0x84/0x98, CPU#16: vdpa/1463
[ 3788.514054] Modules linked in: octep_vdpa virtio_net virtio_vdpa [last unloaded: virtio_vdpa]
[ 3788.514064] CPU: 16 UID: 0 PID: 1463 Comm: vdpa Tainted: G W 6.18.0 #10 PREEMPT
[ 3788.514067] Tainted: [W]=WARN
[ 3788.514069] Hardware name: Marvell CN106XX board (DT)
[ 3788.514071] pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
[ 3788.514074] pc : devm_kfree+0x84/0x98
[ 3788.514076] lr : devm_kfree+0x54/0x98
[ 3788.514079] sp : ffff800084e2f220
[ 3788.514080] x29: ffff800084e2f220 x28: ffff0003b2366000 x27: 000000000000003f
[ 3788.514085] x26: 000000000000003f x25: ffff000106f17c10 x24: 0000000000000080
[ 3788.514089] x23: ffff00045bb8ab08 x22: ffff00045bb8a000 x21: 0000000000000018
[ 3788.514093] x20: ffff0004355c3080 x19: ffff00045bb8aa00 x18: 0000000000080000
[ 3788.514098] x17: 0000000000000040 x16: 000000000000001f x15: 000000000007ffff
[ 3788.514102] x14: 0000000000000488 x13: 0000000000000005 x12: 00000000000fffff
[ 3788.514106] x11: ffffffffffffffff x10: 0000000000000005 x9 : ffff800080c8c05c
[ 3788.514110] x8 : ffff800084e2eeb8 x7 : 0000000000000000 x6 : 000000000000003f
[ 3788.514115] x5 : ffff8000831bafe0 x4 : ffff800080c8b010 x3 : ffff0004355c3080
[ 3788.514119] x2 : ffff0004355c3080 x1 : 0000000000000000 x0 : 0000000000000000
[ 3788.514123] Call trace:
[ 3788.514125] devm_kfree+0x84/0x98 (P)
[ 3788.514129] virtnet_set_queues+0x134/0x2e8 [virtio_net]
[ 3788.514135] virtnet_probe+0x9c0/0xe00 [virtio_net]
[ 3788.514139] virtio_dev_probe+0x1e0/0x338
[ 3788.514144] really_probe+0xc8/0x3a0
[ 3788.514149] __driver_probe_device+0x84/0x170
[ 3788.514152] driver_probe_device+0x44/0x120
[ 3788.514155] __device_attach_driver+0xc4/0x168
[ 3788.514158] bus_for_each_drv+0x8c/0xf0
[ 3788.514161] __device_attach+0xa4/0x1c0
[ 3788.514164] device_initial_probe+0x1c/0x30
[ 3788.514168] bus_probe_device+0xb4/0xc0
[ 3788.514170] device_add+0x614/0x828
[ 3788.514173] register_virtio_device+0x214/0x258
[ 3788.514175] virtio_vdpa_probe+0xa0/0x110 [virtio_vdpa]
[ 3788.514179] vdpa_dev_probe+0xa8/0xd8
[ 3788.514183] really_probe+0xc8/0x3a0
[ 3788.514186] __driver_probe_device+0x84/0x170
[ 3788.514189] driver_probe_device+0x44/0x120
[ 3788.514192] __device_attach_driver+0xc4/0x168
[ 3788.514195] bus_for_each_drv+0x8c/0xf0
[ 3788.514197] __device_attach+0xa4/0x1c0
[ 3788.514200] device_initial_probe+0x1c/0x30
[ 3788.514203] bus_probe_device+0xb4/0xc0
[ 3788.514206] device_add+0x614/0x828
[ 3788.514209] _vdpa_register_device+0x58/0x88
[ 3788.514211] octep_vdpa_dev_add+0x104/0x228 [octep_vdpa]
[ 3788.514215] vdpa_nl_cmd_dev_add_set_doit+0x2d0/0x3c0
[ 3788.514218] genl_family_rcv_msg_doit+0xe4/0x158
[ 3788.514222] genl_rcv_msg+0x218/0x298
[ 3788.514225] netlink_rcv_skb+0x64/0x138
[ 3788.514229] genl_rcv+0x40/0x60
[ 3788.514233] netlink_unicast+0x32c/0x3b0
[ 3788.514237] netlink_sendmsg+0x170/0x3b8
[ 3788.514241] __sys_sendto+0x12c/0x1c0
[ 3788.514246] __arm64_sys_sendto+0x30/0x48
[ 3788.514249] invoke_syscall.constprop.0+0x58/0xf8
[ 3788.514255] do_el0_svc+0x48/0xd0
[ 3788.514259] el0_svc+0x48/0x210
[ 3788.514264] el0t_64_sync_handler+0xa0/0xe8
[ 3788.514268] el0t_64_sync+0x198/0x1a0
[ 3788.514271] ---[ end trace 0000000000000000 ]---
Fix by using virtio_device->device consistently for
allocation and deallocation |
