Export limit exceeded: 350262 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (350262 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-26816 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86, relocs: Ignore relocations in .notes section When building with CONFIG_XEN_PV=y, .text symbols are emitted into the .notes section so that Xen can find the "startup_xen" entry point. This information is used prior to booting the kernel, so relocations are not useful. In fact, performing relocations against the .notes section means that the KASLR base is exposed since /sys/kernel/notes is world-readable. To avoid leaking the KASLR base without breaking unprivileged tools that are expecting to read /sys/kernel/notes, skip performing relocations in the .notes section. The values readable in .notes are then identical to those found in System.map. | ||||
| CVE-2024-26812 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Create persistent INTx handler A vulnerability exists where the eventfd for INTx signaling can be deconfigured, which unregisters the IRQ handler but still allows eventfds to be signaled with a NULL context through the SET_IRQS ioctl or through unmask irqfd if the device interrupt is pending. Ideally this could be solved with some additional locking; the igate mutex serializes the ioctl and config space accesses, and the interrupt handler is unregistered relative to the trigger, but the irqfd path runs asynchronous to those. The igate mutex cannot be acquired from the atomic context of the eventfd wake function. Disabling the irqfd relative to the eventfd registration is potentially incompatible with existing userspace. As a result, the solution implemented here moves configuration of the INTx interrupt handler to track the lifetime of the INTx context object and irq_type configuration, rather than registration of a particular trigger eventfd. Synchronization is added between the ioctl path and eventfd_signal() wrapper such that the eventfd trigger can be dynamically updated relative to in-flight interrupts or irqfd callbacks. | ||||
| CVE-2024-26810 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-05-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Lock external INTx masking ops Mask operations through config space changes to DisINTx may race INTx configuration changes via ioctl. Create wrappers that add locking for paths outside of the core interrupt code. In particular, irq_type is updated holding igate, therefore testing is_intx() requires holding igate. For example clearing DisINTx from config space can otherwise race changes of the interrupt configuration. This aligns interfaces which may trigger the INTx eventfd into two camps, one side serialized by igate and the other only enabled while INTx is configured. A subsequent patch introduces synchronization for the latter flows. | ||||
| CVE-2024-26787 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: stm32: fix DMA API overlapping mappings warning Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST, overlapping mappings aren't supported WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568 add_dma_entry+0x234/0x2f4 Modules linked in: CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1 Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT) Workqueue: events_freezable mmc_rescan Call trace: add_dma_entry+0x234/0x2f4 debug_dma_map_sg+0x198/0x350 __dma_map_sg_attrs+0xa0/0x110 dma_map_sg_attrs+0x10/0x2c sdmmc_idma_prep_data+0x80/0xc0 mmci_prep_data+0x38/0x84 mmci_start_data+0x108/0x2dc mmci_request+0xe4/0x190 __mmc_start_request+0x68/0x140 mmc_start_request+0x94/0xc0 mmc_wait_for_req+0x70/0x100 mmc_send_tuning+0x108/0x1ac sdmmc_execute_tuning+0x14c/0x210 mmc_execute_tuning+0x48/0xec mmc_sd_init_uhs_card.part.0+0x208/0x464 mmc_sd_init_card+0x318/0x89c mmc_attach_sd+0xe4/0x180 mmc_rescan+0x244/0x320 DMA API debug brings to light leaking dma-mappings as dma_map_sg and dma_unmap_sg are not correctly balanced. If an error occurs in mmci_cmd_irq function, only mmci_dma_error function is called and as this API is not managed on stm32 variant, dma_unmap_sg is never called in this error path. | ||||
| CVE-2024-26659 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: handle isoc Babble and Buffer Overrun events properly xHCI 4.9 explicitly forbids assuming that the xHC has released its ownership of a multi-TRB TD when it reports an error on one of the early TRBs. Yet the driver makes such assumption and releases the TD, allowing the remaining TRBs to be freed or overwritten by new TDs. The xHC should also report completion of the final TRB due to its IOC flag being set by us, regardless of prior errors. This event cannot be recognized if the TD has already been freed earlier, resulting in "Transfer event TRB DMA ptr not part of current TD" error message. Fix this by reusing the logic for processing isoc Transaction Errors. This also handles hosts which fail to report the final completion. Fix transfer length reporting on Babble errors. They may be caused by device malfunction, no guarantee that the buffer has been filled. | ||||
| CVE-2024-26651 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sr9800: Add check for usbnet_get_endpoints Add check for usbnet_get_endpoints() and return the error if it fails in order to transfer the error. | ||||
| CVE-2024-26643 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout While the rhashtable set gc runs asynchronously, a race allows it to collect elements from anonymous sets with timeouts while it is being released from the commit path. Mingi Cho originally reported this issue in a different path in 6.1.x with a pipapo set with low timeouts which is not possible upstream since 7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set element timeout"). Fix this by setting on the dead flag for anonymous sets to skip async gc in this case. According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on transaction abort"), Florian plans to accelerate abort path by releasing objects via workqueue, therefore, this sets on the dead flag for abort path too. | ||||
| CVE-2024-26642 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: disallow anonymous set with timeout flag Anonymous sets are never used with timeout from userspace, reject this. Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work. | ||||
| CVE-2024-26629 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix RELEASE_LOCKOWNER The test on so_count in nfsd4_release_lockowner() is nonsense and harmful. Revert to using check_for_locks(), changing that to not sleep. First: harmful. As is documented in the kdoc comment for nfsd4_release_lockowner(), the test on so_count can transiently return a false positive resulting in a return of NFS4ERR_LOCKS_HELD when in fact no locks are held. This is clearly a protocol violation and with the Linux NFS client it can cause incorrect behaviour. If RELEASE_LOCKOWNER is sent while some other thread is still processing a LOCK request which failed because, at the time that request was received, the given owner held a conflicting lock, then the nfsd thread processing that LOCK request can hold a reference (conflock) to the lock owner that causes nfsd4_release_lockowner() to return an incorrect error. The Linux NFS client ignores that NFS4ERR_LOCKS_HELD error because it never sends NFS4_RELEASE_LOCKOWNER without first releasing any locks, so it knows that the error is impossible. It assumes the lock owner was in fact released so it feels free to use the same lock owner identifier in some later locking request. When it does reuse a lock owner identifier for which a previous RELEASE failed, it will naturally use a lock_seqid of zero. However the server, which didn't release the lock owner, will expect a larger lock_seqid and so will respond with NFS4ERR_BAD_SEQID. So clearly it is harmful to allow a false positive, which testing so_count allows. The test is nonsense because ... well... it doesn't mean anything. so_count is the sum of three different counts. 1/ the set of states listed on so_stateids 2/ the set of active vfs locks owned by any of those states 3/ various transient counts such as for conflicting locks. When it is tested against '2' it is clear that one of these is the transient reference obtained by find_lockowner_str_locked(). It is not clear what the other one is expected to be. In practice, the count is often 2 because there is precisely one state on so_stateids. If there were more, this would fail. In my testing I see two circumstances when RELEASE_LOCKOWNER is called. In one case, CLOSE is called before RELEASE_LOCKOWNER. That results in all the lock states being removed, and so the lockowner being discarded (it is removed when there are no more references which usually happens when the lock state is discarded). When nfsd4_release_lockowner() finds that the lock owner doesn't exist, it returns success. The other case shows an so_count of '2' and precisely one state listed in so_stateid. It appears that the Linux client uses a separate lock owner for each file resulting in one lock state per lock owner, so this test on '2' is safe. For another client it might not be safe. So this patch changes check_for_locks() to use the (newish) find_any_file_locked() so that it doesn't take a reference on the nfs4_file and so never calls nfsd_file_put(), and so never sleeps. With this check is it safe to restore the use of check_for_locks() rather than testing so_count against the mysterious '2'. | ||||
| CVE-2024-26596 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn't caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary. | ||||
| CVE-2024-25739 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-05-12 | 5.5 Medium |
| create_empty_lvol in drivers/mtd/ubi/vtbl.c in the Linux kernel through 6.7.4 can attempt to allocate zero bytes, and crash, because of a missing check for ubi->leb_size. | ||||
| CVE-2024-24859 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-12 | 4.6 Medium |
| A race condition was found in the Linux kernel's net/bluetooth in sniff_{min,max}_interval_set() function. This can result in a bluetooth sniffing exception issue, possibly leading denial of service. | ||||
| CVE-2024-24858 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-05-12 | 4.6 Medium |
| A race condition was found in the Linux kernel's net/bluetooth in {conn,adv}_{min,max}_interval_set() function. This can result in I2cap connection or broadcast abnormality issue, possibly leading to denial of service. | ||||
| CVE-2024-24857 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-05-12 | 4.6 Medium |
| A race condition was found in the Linux kernel's net/bluetooth device driver in conn_info_{min,max}_age_set() function. This can result in integrity overflow issue, possibly leading to bluetooth connection abnormality or denial of service. | ||||
| CVE-2024-24855 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 5 Medium |
| A race condition was found in the Linux kernel's scsi device driver in lpfc_unregister_fcf_rescan() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue. | ||||
| CVE-2024-23848 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-05-12 | 5.5 Medium |
| In the Linux kernel through 6.7.1, there is a use-after-free in cec_queue_msg_fh, related to drivers/media/cec/core/cec-adap.c and drivers/media/cec/core/cec-api.c. | ||||
| CVE-2024-23307 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-05-12 | 4.4 Medium |
| Integer Overflow or Wraparound vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (md, raid, raid5 modules) allows Forced Integer Overflow. | ||||
| CVE-2024-22365 | 2 Linux-pam, Redhat | 2 Linux-pam, Enterprise Linux | 2026-05-12 | 5.5 Medium |
| linux-pam (aka Linux PAM) before 1.6.0 allows attackers to cause a denial of service (blocked login process) via mkfifo because the openat call (for protect_dir) lacks O_DIRECTORY. | ||||
| CVE-2024-22099 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-12 | 6.3 Medium |
| NULL Pointer Dereference vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (net, bluetooth modules) allows Overflow Buffers. This vulnerability is associated with program files /net/bluetooth/rfcomm/core.C. This issue affects Linux kernel: v2.6.12-rc2. | ||||
| CVE-2024-12243 | 1 Redhat | 5 Discovery, Enterprise Linux, Openshift and 2 more | 2026-05-12 | 5.3 Medium |
| A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition. | ||||