| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_pci: Fix admin vq cleanup by using correct info pointer
vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq
resources by virtio_pci_vq_info pointer. The info pointer of admin
vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[].
Using the info pointer from vp_dev->vqs[] for admin vq causes a
kernel NULL pointer dereference bug.
In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer
from vp_dev->admin_vq.info for admin vq to clean up the resources.
Also make info ptr as argument of vp_del_vq() to be symmetric with
vp_setup_vq().
vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace:
==================================================================
BUG: kernel NULL pointer dereference, address:0000000000000000
...
CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1
RIP: 0010:vp_reset+0x57/0x90 [virtio_pci]
Call Trace:
<TASK>
...
? vp_reset+0x57/0x90 [virtio_pci]
? vp_reset+0x38/0x90 [virtio_pci]
virtio_reset_device+0x1d/0x30
remove_vq_common+0x1c/0x1a0 [virtio_net]
virtnet_remove+0xa1/0xc0 [virtio_net]
virtio_dev_remove+0x46/0xa0
...
virtio_pci_driver_exit+0x14/0x810 [virtio_pci]
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.
BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
? __die+0x81/0xc3
? no_context+0x194/0x350
? do_page_fault+0x30/0x110
? async_page_fault+0x3e/0x50
? sk_psock_strp_data_ready+0x23/0x60
virtio_transport_recv_pkt+0x750/0x800
? update_load_avg+0x7e/0x620
vsock_loopback_work+0xd0/0x100
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? __kthread_cancel_work+0x40/0x40
ret_from_fork+0x1f/0x40
v2:
- Add IS_ICSK check
v3:
- Update the commits in Fixes |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: scm: fix a NULL-pointer dereference
Some SCM calls can be invoked with __scm being NULL (the driver may not
have been and will not be probed as there's no SCM entry in device-tree).
Make sure we don't dereference a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix idpf_vc_core_init error path
In an event where the platform running the device control plane
is rebooted, reset is detected on the driver. It releases
all the resources and waits for the reset to complete. Once the
reset is done, it tries to build the resources back. At this
time if the device control plane is not yet started, then
the driver timeouts on the virtchnl message and retries to
establish the mailbox again.
In the retry flow, mailbox is deinitialized but the mailbox
workqueue is still alive and polling for the mailbox message.
This results in accessing the released control queue leading to
null-ptr-deref. Fix it by unrolling the work queue cancellation
and mailbox deinitialization in the reverse order which they got
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy()
In mtk_crtc_create(), if the call to mbox_request_channel() fails then we
set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation,
we do not call cmdq_pkt_create().
During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan"
is NULL first before calling cmdq_pkt_destroy(). Calling
cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and
it will result in a NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof
'modprobe slub_kunit' will have a warning as shown below. The root cause
is that __kmalloc_cache_noprof was directly used, which resulted in no
alloc_tag being allocated. This caused current->alloc_tag to be null,
leading to a warning in alloc_tag_add_check.
Let's add an alloc_hook layer to __kmalloc_cache_noprof specifically
within lib/slub_kunit.c, which is the only user of this internal slub
function outside kmalloc implementation itself.
[58162.947016] WARNING: CPU: 2 PID: 6210 at
./include/linux/alloc_tag.h:125 alloc_tagging_slab_alloc_hook+0x268/0x27c
[58162.957721] Call trace:
[58162.957919] alloc_tagging_slab_alloc_hook+0x268/0x27c
[58162.958286] __kmalloc_cache_noprof+0x14c/0x344
[58162.958615] test_kmalloc_redzone_access+0x50/0x10c [slub_kunit]
[58162.959045] kunit_try_run_case+0x74/0x184 [kunit]
[58162.959401] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit]
[58162.959841] kthread+0x10c/0x118
[58162.960093] ret_from_fork+0x10/0x20
[58162.960363] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: allocate vf_state during PF probes
In the previous implementation, vf_state is allocated memory only when VF
is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before
VF is enabled to configure the MAC address of VF. If this is the case,
enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null
pointer. The simplified error log is as follows.
root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89
[ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy
[ 173.641973] lr : do_setlink+0x4a8/0xec8
[ 173.732292] Call trace:
[ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80
[ 173.738847] __rtnl_newlink+0x530/0x89c
[ 173.742692] rtnl_newlink+0x50/0x7c
[ 173.746189] rtnetlink_rcv_msg+0x128/0x390
[ 173.750298] netlink_rcv_skb+0x60/0x130
[ 173.754145] rtnetlink_rcv+0x18/0x24
[ 173.757731] netlink_unicast+0x318/0x380
[ 173.761665] netlink_sendmsg+0x17c/0x3c8 |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation
When sealing or unsealing a key blob we currently do not wait for
the AEAD cipher operation to finish and simply return after submitting
the request. If there is some load on the system we can exit before
the cipher operation is done and the buffer we read from/write to
is already removed from the stack. This will e.g. result in NULL
pointer dereference errors in the DCP driver during blob creation.
Fix this by waiting for the AEAD cipher operation to finish before
resuming the seal and unseal calls. |
| In the Linux kernel, the following vulnerability has been resolved:
sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
The following race condition could trigger a NULL pointer dereference:
sock_map_link_detach(): sock_map_link_update_prog():
mutex_lock(&sockmap_mutex);
...
sockmap_link->map = NULL;
mutex_unlock(&sockmap_mutex);
mutex_lock(&sockmap_mutex);
...
sock_map_prog_link_lookup(sockmap_link->map);
mutex_unlock(&sockmap_mutex);
<continue>
Fix it by adding a NULL pointer check. In this specific case, it makes
no sense to update a link which is being released. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data, but mistakenly
also removed the initialisation despite the data still being used in the
runtime PM callbacks.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with this driver. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data from the
qcom-qmp-usb driver, but mistakenly also removed the initialisation
despite the data still being used in the runtime PM callbacks. This bug
was later reproduced when the driver was copied to create the
qmp-usb-legacy driver.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with these drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend
Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data from the
qcom-qmp-usb driver, but mistakenly also removed the initialisation
despite the data still being used in the runtime PM callbacks. This bug
was later reproduced when the driver was copied to create the qmp-usbc
driver.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with these drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix error propagation of split bios
The purpose of btrfs_bbio_propagate_error() shall be propagating an error
of split bio to its original btrfs_bio, and tell the error to the upper
layer. However, it's not working well on some cases.
* Case 1. Immediate (or quick) end_bio with an error
When btrfs sends btrfs_bio to mirrored devices, btrfs calls
btrfs_bio_end_io() when all the mirroring bios are completed. If that
btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function
is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error()
accesses the orig_bbio's bio context to increase the error count.
That works well in most cases. However, if the end_io is called enough
fast, orig_bbio's (remaining part after split) bio context may not be
properly set at that time. Since the bio context is set when the orig_bbio
(the last btrfs_bio) is sent to devices, that might be too late for earlier
split btrfs_bio's completion. That will result in NULL pointer
dereference.
That bug is easily reproducible by running btrfs/146 on zoned devices [1]
and it shows the following trace.
[1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: writeback wb_workfn (flush-btrfs-5)
RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs]
BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0
RSP: 0018:ffffc9000006f248 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080
RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58
R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158
FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body.cold+0x19/0x26
? page_fault_oops+0x13e/0x2b0
? _printk+0x58/0x73
? do_user_addr_fault+0x5f/0x750
? exc_page_fault+0x76/0x240
? asm_exc_page_fault+0x22/0x30
? btrfs_bio_end_io+0xae/0xc0 [btrfs]
? btrfs_log_dev_io_error+0x7f/0x90 [btrfs]
btrfs_orig_write_end_io+0x51/0x90 [btrfs]
dm_submit_bio+0x5c2/0xa50 [dm_mod]
? find_held_lock+0x2b/0x80
? blk_try_enter_queue+0x90/0x1e0
__submit_bio+0xe0/0x130
? ktime_get+0x10a/0x160
? lockdep_hardirqs_on+0x74/0x100
submit_bio_noacct_nocheck+0x199/0x410
btrfs_submit_bio+0x7d/0x150 [btrfs]
btrfs_submit_chunk+0x1a1/0x6d0 [btrfs]
? lockdep_hardirqs_on+0x74/0x100
? __folio_start_writeback+0x10/0x2c0
btrfs_submit_bbio+0x1c/0x40 [btrfs]
submit_one_bio+0x44/0x60 [btrfs]
submit_extent_folio+0x13f/0x330 [btrfs]
? btrfs_set_range_writeback+0xa3/0xd0 [btrfs]
extent_writepage_io+0x18b/0x360 [btrfs]
extent_write_locked_range+0x17c/0x340 [btrfs]
? __pfx_end_bbio_data_write+0x10/0x10 [btrfs]
run_delalloc_cow+0x71/0xd0 [btrfs]
btrfs_run_delalloc_range+0x176/0x500 [btrfs]
? find_lock_delalloc_range+0x119/0x260 [btrfs]
writepage_delalloc+0x2ab/0x480 [btrfs]
extent_write_cache_pages+0x236/0x7d0 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xd4/0x240
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode+0x12c/0x290
? wbc_attach_and_unlock_inode+0x12c/0x29
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-dspi: Fix crash when not using GPIO chip select
Add check for the return value of spi_get_csgpiod() to avoid passing a NULL
pointer to gpiod_direction_output(), preventing a crash when GPIO chip
select is not used.
Fix below crash:
[ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 4.260762] Mem abort info:
[ 4.263556] ESR = 0x0000000096000004
[ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.272624] SET = 0, FnV = 0
[ 4.275681] EA = 0, S1PTW = 0
[ 4.278822] FSC = 0x04: level 0 translation fault
[ 4.283704] Data abort info:
[ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.302445] [0000000000000000] user address but active_mm is swapper
[ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 4.315072] Modules linked in:
[ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359
[ 4.328130] Hardware name: LS1046A QDS Board (DT)
[ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.339794] pc : gpiod_direction_output+0x34/0x5c
[ 4.344505] lr : gpiod_direction_output+0x18/0x5c
[ 4.349208] sp : ffff80008003b8f0
[ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068
[ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810
[ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002
[ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff
[ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007
[ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e
[ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008
[ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000
[ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000
[ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000
[ 4.423921] Call trace:
[ 4.426362] gpiod_direction_output+0x34/0x5c (P)
[ 4.431067] gpiod_direction_output+0x18/0x5c (L)
[ 4.435771] dspi_setup+0x220/0x334 |
| In the Linux kernel, the following vulnerability has been resolved:
sched/numa: Fix the potential null pointer dereference in task_numa_work()
When running stress-ng-vm-segv test, we found a null pointer dereference
error in task_numa_work(). Here is the backtrace:
[323676.066985] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
......
[323676.067108] CPU: 35 PID: 2694524 Comm: stress-ng-vm-se
......
[323676.067113] pstate: 23401009 (nzCv daif +PAN -UAO +TCO +DIT +SSBS BTYPE=--)
[323676.067115] pc : vma_migratable+0x1c/0xd0
[323676.067122] lr : task_numa_work+0x1ec/0x4e0
[323676.067127] sp : ffff8000ada73d20
[323676.067128] x29: ffff8000ada73d20 x28: 0000000000000000 x27: 000000003e89f010
[323676.067130] x26: 0000000000080000 x25: ffff800081b5c0d8 x24: ffff800081b27000
[323676.067133] x23: 0000000000010000 x22: 0000000104d18cc0 x21: ffff0009f7158000
[323676.067135] x20: 0000000000000000 x19: 0000000000000000 x18: ffff8000ada73db8
[323676.067138] x17: 0001400000000000 x16: ffff800080df40b0 x15: 0000000000000035
[323676.067140] x14: ffff8000ada73cc8 x13: 1fffe0017cc72001 x12: ffff8000ada73cc8
[323676.067142] x11: ffff80008001160c x10: ffff000be639000c x9 : ffff8000800f4ba4
[323676.067145] x8 : ffff000810375000 x7 : ffff8000ada73974 x6 : 0000000000000001
[323676.067147] x5 : 0068000b33e26707 x4 : 0000000000000001 x3 : ffff0009f7158000
[323676.067149] x2 : 0000000000000041 x1 : 0000000000004400 x0 : 0000000000000000
[323676.067152] Call trace:
[323676.067153] vma_migratable+0x1c/0xd0
[323676.067155] task_numa_work+0x1ec/0x4e0
[323676.067157] task_work_run+0x78/0xd8
[323676.067161] do_notify_resume+0x1ec/0x290
[323676.067163] el0_svc+0x150/0x160
[323676.067167] el0t_64_sync_handler+0xf8/0x128
[323676.067170] el0t_64_sync+0x17c/0x180
[323676.067173] Code: d2888001 910003fd f9000bf3 aa0003f3 (f9401000)
[323676.067177] SMP: stopping secondary CPUs
[323676.070184] Starting crashdump kernel...
stress-ng-vm-segv in stress-ng is used to stress test the SIGSEGV error
handling function of the system, which tries to cause a SIGSEGV error on
return from unmapping the whole address space of the child process.
Normally this program will not cause kernel crashes. But before the
munmap system call returns to user mode, a potential task_numa_work()
for numa balancing could be added and executed. In this scenario, since the
child process has no vma after munmap, the vma_next() in task_numa_work()
will return a null pointer even if the vma iterator restarts from 0.
Recheck the vma pointer before dereferencing it in task_numa_work(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Fix MAX_TRACE_ARGS limit handling
When creating a trace_probe we would set nr_args prior to truncating the
arguments to MAX_TRACE_ARGS. However, we would only initialize arguments
up to the limit.
This caused invalid memory access when attempting to set up probes with
more than 128 fetchargs.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:__set_print_fmt+0x134/0x330
Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return
an error when there are too many arguments instead of silently
truncating. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Hold rescan lock while adding devices during host probe
Since adding the PCI power control code, we may end up with a race between
the pwrctl platform device rescanning the bus and host controller probe
functions. The latter need to take the rescan lock when adding devices or
we may end up in an undefined state having two incompletely added devices
and hit the following crash when trying to remove the device over sysfs:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Call trace:
__pi_strlen+0x14/0x150
kernfs_find_ns+0x80/0x13c
kernfs_remove_by_name_ns+0x54/0xf0
sysfs_remove_bin_file+0x24/0x34
pci_remove_resource_files+0x3c/0x84
pci_remove_sysfs_dev_files+0x28/0x38
pci_stop_bus_device+0x8c/0xd8
pci_stop_bus_device+0x40/0xd8
pci_stop_and_remove_bus_device_locked+0x28/0x48
remove_store+0x70/0xb0
dev_attr_store+0x20/0x38
sysfs_kf_write+0x58/0x78
kernfs_fop_write_iter+0xe8/0x184
vfs_write+0x2dc/0x308
ksys_write+0x7c/0xec |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
[BUG]
Syzbot reports the following crash:
BTRFS info (device loop0 state MCS): disabling free space tree
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline]
RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041
Call Trace:
<TASK>
btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530
btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312
btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012
btrfs_remount_rw fs/btrfs/super.c:1309 [inline]
btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534
btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline]
btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115
vfs_get_tree+0x90/0x2b0 fs/super.c:1800
do_new_mount+0x2be/0xb40 fs/namespace.c:3472
do_mount fs/namespace.c:3812 [inline]
__do_sys_mount fs/namespace.c:4020 [inline]
__se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
To support mounting different subvolume with different RO/RW flags for
the new mount APIs, btrfs introduced two workaround to support this feature:
- Skip mount option/feature checks if we are mounting a different
subvolume
- Reconfigure the fs to RW if the initial mount is RO
Combining these two, we can have the following sequence:
- Mount the fs ro,rescue=all,clear_cache,space_cache=v1
rescue=all will mark the fs as hard read-only, so no v2 cache clearing
will happen.
- Mount a subvolume rw of the same fs.
We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY
because our new fc is RW, different from the original fs.
Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag
first so that we can grab the existing fs_info.
Then we reconfigure the fs to RW.
- During reconfiguration, option/features check is skipped
This means we will restart the v2 cache clearing, and convert back to
v1 cache.
This will trigger fs writes, and since the original fs has "rescue=all"
option, it skips the csum tree read.
And eventually causing NULL pointer dereference in super block
writeback.
[FIX]
For reconfiguration caused by different subvolume RO/RW flags, ensure we
always run btrfs_check_options() to ensure we have proper hard RO
requirements met.
In fact the function btrfs_check_options() doesn't really do many
complex checks, but hard RO requirement and some feature dependency
checks, thus there is no special reason not to do the check for mount
reconfiguration. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix null ptr dereference in raid10_size()
In raid10_run() if raid10_set_queue_limits() succeed, the return value
is set to zero, and if following procedures failed raid10_run() will
return zero while mddev->private is still NULL, causing null ptr
dereference in raid10_size().
Fix the problem by only overwrite the return value if
raid10_set_queue_limits() failed. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc
Commit 15c7fab0e047 ("ASoC: qcom: Move Soundwire runtime stream alloc to
soundcards") moved the allocation of Soundwire stream runtime from the
Qualcomm Soundwire driver to each individual machine sound card driver,
except that it forgot to update SC7280 card.
Just like for other Qualcomm sound cards using Soundwire, the card
driver should allocate and release the runtime. Otherwise sound
playback will result in a NULL pointer dereference or other effect of
uninitialized memory accesses (which was confirmed on SDM845 having
similar issue). |
