| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: always walk all pending catchall elements
During transaction processing we might have more than one catchall element:
1 live catchall element and 1 pending element that is coming as part of the
new batch.
If the map holding the catchall elements is also going away, its
required to toggle all catchall elements and not just the first viable
candidate.
Otherwise, we get:
WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404
RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables]
[..]
__nft_set_elem_destroy+0x106/0x380 [nf_tables]
nf_tables_abort_release+0x348/0x8d0 [nf_tables]
nf_tables_abort+0xcf2/0x3ac0 [nf_tables]
nfnetlink_rcv_batch+0x9c9/0x20e0 [..] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: ensure ctx->rings is stable for task work flags manipulation
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: observe an RCU grace period in macvlan_common_newlink() error path
valis reported that a race condition still happens after my prior patch.
macvlan_common_newlink() might have made @dev visible before
detecting an error, and its caller will directly call free_netdev(dev).
We must respect an RCU period, either in macvlan or the core networking
stack.
After adding a temporary mdelay(1000) in macvlan_forward_source_one()
to open the race window, valis repro was:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
(ip link add invalid% link p2 type macvlan mode source macaddr add
00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4
PING 1.2.3.4 (1.2.3.4): 56 data bytes
RTNETLINK answers: Invalid argument
BUG: KASAN: slab-use-after-free in macvlan_forward_source
(drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
Read of size 8 at addr ffff888016bb89c0 by task e/175
CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
kasan_report (mm/kasan/report.c:597)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
? tasklet_init (kernel/softirq.c:983)
macvlan_handle_frame (drivers/net/macvlan.c:501)
Allocated by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
__kasan_kmalloc (mm/kasan/common.c:419)
__kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657
mm/slub.c:7140)
alloc_netdev_mqs (net/core/dev.c:12012)
rtnl_create_link (net/core/rtnetlink.c:3648)
rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Freed by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kfree (mm/slub.c:6674 mm/slub.c:6882)
rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: unconditionally bump set->nelems before insertion
In case that the set is full, a new element gets published then removed
without waiting for the RCU grace period, while RCU reader can be
walking over it already.
To address this issue, add the element transaction even if set is full,
but toggle the set_full flag to report -ENFILE so the abort path safely
unwinds the set to its previous state.
As for element updates, decrement set->nelems to restore it.
A simpler fix is to call synchronize_rcu() in the error path.
However, with a large batch adding elements to already maxed-out set,
this could cause noticeable slowdown of such batches. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: only call xf{array,blob}_destroy if we have a valid pointer
Only call the xfarray and xfblob destructor if we have a valid pointer,
and be sure to null out that pointer afterwards. Note that this patch
fixes a large number of commits, most of which were merged between 6.9
and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check return value of xchk_scrub_create_subord
Fix this function to return NULL instead of a mangled ENOMEM, then fix
the callers to actually check for a null pointer and return ENOMEM.
Most of the corrections here are for code merged between 6.2 and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check for deleted cursors when revalidating two btrees
The free space and inode btree repair functions will rebuild both btrees
at the same time, after which it needs to evaluate both btrees to
confirm that the corruptions are gone.
However, Jiaming Zhang ran syzbot and produced a crash in the second
xchk_allocbt call. His root-cause analysis is as follows (with minor
corrections):
In xrep_revalidate_allocbt(), xchk_allocbt() is called twice (first
for BNOBT, second for CNTBT). The cause of this issue is that the
first call nullified the cursor required by the second call.
Let's first enter xrep_revalidate_allocbt() via following call chain:
xfs_file_ioctl() ->
xfs_ioc_scrubv_metadata() ->
xfs_scrub_metadata() ->
`sc->ops->repair_eval(sc)` ->
xrep_revalidate_allocbt()
xchk_allocbt() is called twice in this function. In the first call:
/* Note that sc->sm->sm_type is XFS_SCRUB_TYPE_BNOPT now */
xchk_allocbt() ->
xchk_btree() ->
`bs->scrub_rec(bs, recp)` ->
xchk_allocbt_rec() ->
xchk_allocbt_xref() ->
xchk_allocbt_xref_other()
since sm_type is XFS_SCRUB_TYPE_BNOBT, pur is set to &sc->sa.cnt_cur.
Kernel called xfs_alloc_get_rec() and returned -EFSCORRUPTED. Call
chain:
xfs_alloc_get_rec() ->
xfs_btree_get_rec() ->
xfs_btree_check_block() ->
(XFS_IS_CORRUPT || XFS_TEST_ERROR), the former is false and the latter
is true, return -EFSCORRUPTED. This should be caused by
ioctl$XFS_IOC_ERROR_INJECTION I guess.
Back to xchk_allocbt_xref_other(), after receiving -EFSCORRUPTED from
xfs_alloc_get_rec(), kernel called xchk_should_check_xref(). In this
function, *curpp (points to sc->sa.cnt_cur) is nullified.
Back to xrep_revalidate_allocbt(), since sc->sa.cnt_cur has been
nullified, it then triggered null-ptr-deref via xchk_allocbt() (second
call) -> xchk_btree().
So. The bnobt revalidation failed on a cross-reference attempt, so we
deleted the cntbt cursor, and then crashed when we tried to revalidate
the cntbt. Therefore, check for a null cntbt cursor before that
revalidation, and mark the repair incomplete. Also we can ignore the
second tree entirely if the first tree was rebuilt but is already
corrupt.
Apply the same fix to xrep_revalidate_iallocbt because it has the same
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix potential NULL pointer dereference in header processing
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0). |
| In the Linux kernel, the following vulnerability has been resolved:
fork: defer linking file vma until vma is fully initialized
Thorvald reported a WARNING [1]. And the root cause is below race:
CPU 1 CPU 2
fork hugetlbfs_fallocate
dup_mmap hugetlbfs_punch_hole
i_mmap_lock_write(mapping);
vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree.
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem!
i_mmap_lock_write(mapping);
hugetlb_vmdelete_list
vma_interval_tree_foreach
hugetlb_vma_trylock_write -- Vma_lock is cleared.
tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem!
hugetlb_vma_unlock_write -- Vma_lock is assigned!!!
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside
i_mmap_rwsem lock while vma lock can be used in the same time. Fix this
by deferring linking file vma until vma is fully initialized. Those vmas
should be initialized first before they can be used. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.15.0 to 1.42.0, the fix for CVE-2026-24051 changed the Darwin ioreg command to use an absolute path but left the BSD kenv command using a bare name, allowing the same PATH hijacking attack on BSD and Solaris platforms. This vulnerability is fixed in 1.43.0. |
| Tina is a headless content management system. In tinacms prior to version 3.1.1, tinacms uses the gray-matter package in an insecure way allowing attackers that can control the content of the processed markdown files, e.g., blog posts, to execute arbitrary code. tinacms version 3.1.1, @tinacms/cli version 2.0.4, and @tinacms/graphql version 2.0.3 contain a fix for the issue. |
| Storybook is a frontend workshop for building user interface components and pages in isolation. A vulnerability present starting in versions 7.0.0 and prior to versions 7.6.21, 8.6.15, 9.1.17, and 10.1.10 relates to Storybook’s handling of environment variables defined in a `.env` file, which could, in specific circumstances, lead to those variables being unexpectedly bundled into the artifacts created by the `storybook build` command. When a built Storybook is published to the web, the bundle’s source is viewable, thus potentially exposing those variables to anyone with access. For a project to potentially be vulnerable to this issue, it must build the Storybook (i.e. run `storybook build` directly or indirectly) in a directory that contains a `.env` file (including variants like `.env.local`) and publish the built Storybook to the web. Storybooks built without a `.env` file at build time are not affected, including common CI-based builds where secrets are provided via platform environment variables rather than `.env` files. Storybook runtime environments (i.e. `storybook dev`) are not affected. Deployed applications that share a repo with your Storybook are not affected. Users should upgrade their Storybook—on both their local machines and CI environment—to version .6.21, 8.6.15, 9.1.17, or 10.1.10 as soon as possible. Maintainers additionally recommend that users audit for any sensitive secrets provided via `.env` files and rotate those keys. Some projects may have been relying on the undocumented behavior at the heart of this issue and will need to change how they reference environment variables after this update. If a project can no longer read necessary environmental variable values, either prefix the variables with `STORYBOOK_` or use the `env` property in Storybook’s configuration to manually specify values. In either case, do not include sensitive secrets as they will be included in the built bundle. |
| Sensitive information disclosure due to insecure folder permissions. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 40713, Acronis True Image OEM (Windows) before build 42575. |
| Local privilege escalation due to DLL hijacking vulnerability. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 40901, Acronis Cyber Protect Cloud Agent (Windows) before build 39378, Acronis Cyber Protect 16 (Windows) before build 39938, Acronis True Image OEM (Windows) before build 42575. |
| Local privilege escalation due to insecure driver communication port permissions. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 40278, Acronis Cyber Protect Cloud Agent (Windows) before build 31637, Acronis Cyber Protect 15 (Windows) before build 35979, Acronis True Image OEM (Windows) before build 42575. |
