| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Race condition for some TDX Module within Ring 0: Hypervisor may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Litestar and Starlite is an Asynchronous Server Gateway Interface (ASGI) framework. Prior to 2.8.3, 2.7.2, and 2.6.4, a Local File Inclusion (LFI) vulnerability has been discovered in the static file serving component of LiteStar. This vulnerability allows attackers to exploit path traversal flaws, enabling unauthorized access to sensitive files outside the designated directories. Such access can lead to the disclosure of sensitive information or potentially compromise the server. The vulnerability is located in the file path handling mechanism within the static content serving function, specifically at `litestar/static_files/base.py`. This vulnerability is fixed in versions 2.8.3, 2.7.2, and 2.6.4. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment. |
| When using domain users as BRAIN2 users, communication with Active Directory services is unencrypted. This can lead to the interception of authentication data and compromise confidentiality. |
| Incorrect Privilege Assignment vulnerability in e-plugins Final User final-user allows Privilege Escalation.This issue affects Final User: from n/a through <= 1.2.5. |
| The Custom Login Page Customizer WordPress plugin before 2.5.4 does not have a proper password reset process, allowing a few unauthenticated requests to reset the password of any user by knowing their username, such as administrator ones, and therefore gain access to their account |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code. |
| On affected platforms running Arista EOS, maliciously formed UDP packets with source port 3503 may be accepted by EOS. UDP Port 3503 is associated with LspPing Echo Reply. This can result in unexpected behaviors, especially for UDP based services that do not perform some form of authentication. |
| Zilab Remote Console Server 3.2.9 contains an unquoted service path vulnerability that allows local attackers to potentially execute arbitrary code with elevated system privileges. Attackers can exploit the unquoted binary path in the service configuration to inject malicious executables that will be run with LocalSystem permissions. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in GT3themes Oyster - Photography WordPress Theme oyster allows DOM-Based XSS.This issue affects Oyster - Photography WordPress Theme: from n/a through <= 4.4.3. |
| A vulnerability was identified in FNKvision Y215 CCTV Camera 10.194.120.40. Affected by this issue is some unknown functionality of the file /etc/passwd of the component Firmware. Such manipulation leads to hard-coded credentials. Local access is required to approach this attack. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weak password recovery mechanism for forgotten password vulnerability was discovered in Productivity Suite software version v4.4.1.19. The vulnerability allows an attacker to decrypt an encrypted project by answering just one recovery question. |
| A local privilege escalation vulnerability exists during the installation of Epic Games Store via the Microsoft Store. A low-privilege user can replace a DLL file during the installation process, which may result in unintended elevation of privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix improper check of dentry.stream.valid_size
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability. |
| The aapanel WP Toolkit plugin for WordPress is vulnerable to Privilege Escalation due to missing authorization checks within the auto_login() function in versions 1.0 to 1.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to bypass all role checks and gain full admin privileges. |
| ForensiT AppX Management Service 2.2.0.4 contains an unquoted service path vulnerability that allows local users to potentially execute arbitrary code with elevated system privileges. Attackers can exploit the unquoted path in the service configuration to inject malicious code that would execute with LocalSystem account permissions during service startup. |
| Middleware causes a prohibitive amount of heap allocations when processing malicious preflight requests that include a Access-Control-Request-Headers (ACRH) header whose value contains many commas. This behavior can be abused by attackers to produce undue load on the middleware/server as an attempt to cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential cfid UAF in smb2_query_info_compound
When smb2_query_info_compound() retries, a previously allocated cfid may
have been freed in the first attempt.
Because cfid wasn't reset on replay, later cleanup could act on a stale
pointer, leading to a potential use-after-free.
Reinitialize cfid to NULL under the replay label.
Example trace (trimmed):
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110
[...]
RIP: 0010:refcount_warn_saturate+0x9c/0x110
[...]
Call Trace:
<TASK>
smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? step_into+0x10d/0x690
? __legitimize_path+0x28/0x60
smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? kmem_cache_alloc+0x18a/0x340
? getname_flags+0x46/0x1e0
cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
statfs_by_dentry+0x67/0x90
vfs_statfs+0x16/0xd0
user_statfs+0x54/0xa0
__do_sys_statfs+0x20/0x50
do_syscall_64+0x58/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix the deadlock of enetc_mdio_lock
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition. |
| Authorization Bypass Through User-Controlled Key vulnerability in Checkout Plugins Stripe Payments For WooCommerce by Checkout.This issue affects Stripe Payments For WooCommerce by Checkout: from n/a through 1.9.1. |
