| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the TCP state machine of Cisco RF Gateway 1 devices could allow an unauthenticated, remote attacker to prevent an affected device from delivering switched digital video (SDV) or video on demand (VoD) streams, resulting in a denial of service (DoS) condition. The vulnerability is due to a processing error with TCP connections to the affected device. An attacker could exploit this vulnerability by establishing a large number of TCP connections to an affected device and not actively closing those TCP connections. A successful exploit could allow the attacker to prevent the affected device from delivering SDV or VoD streams to set-top boxes. Cisco Bug IDs: CSCvf19887. |
| OpenSSL 1.0.2 (starting from version 1.0.2b) introduced an "error state" mechanism. The intent was that if a fatal error occurred during a handshake then OpenSSL would move into the error state and would immediately fail if you attempted to continue the handshake. This works as designed for the explicit handshake functions (SSL_do_handshake(), SSL_accept() and SSL_connect()), however due to a bug it does not work correctly if SSL_read() or SSL_write() is called directly. In that scenario, if the handshake fails then a fatal error will be returned in the initial function call. If SSL_read()/SSL_write() is subsequently called by the application for the same SSL object then it will succeed and the data is passed without being decrypted/encrypted directly from the SSL/TLS record layer. In order to exploit this issue an application bug would have to be present that resulted in a call to SSL_read()/SSL_write() being issued after having already received a fatal error. OpenSSL version 1.0.2b-1.0.2m are affected. Fixed in OpenSSL 1.0.2n. OpenSSL 1.1.0 is not affected. |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE 3.16 could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a race condition that could occur when the affected software processes an SNMP read request that contains certain criteria for a specific object ID (OID) and an active crypto session is disconnected on an affected device. An attacker who can authenticate to an affected device could trigger this vulnerability by issuing an SNMP request for a specific OID on the device. A successful exploit will cause the device to restart due to an attempt to access an invalid memory region. The attacker does not control how or when crypto sessions are disconnected on the device. Cisco Bug IDs: CSCvb94392. |
| A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795. |
| A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072. |
| A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803. |
| A vulnerability in the data plane IP fragment handler of the Cisco Adaptive Security Appliance (ASA) CX Context-Aware Security module could allow an unauthenticated, remote attacker to cause the CX module to be unable to process further traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of IP fragments. An attacker could exploit this vulnerability by sending crafted fragmented IP traffic across the CX module. An exploit could allow the attacker to exhaust free packet buffers in shared memory (SHM), causing the CX module to be unable to process further traffic, resulting in a DoS condition. This vulnerability affects all versions of the ASA CX Context-Aware Security module. Cisco has not released and will not release software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCva62946. |
| By flooding a Juniper Networks router running Junos OS with specially crafted IPv6 traffic, all available resources can be consumed, leading to the inability to store next hop information for legitimate traffic. In extreme cases, the crafted IPv6 traffic may result in a total resource exhaustion and kernel panic. The issue is triggered by traffic destined to the router. Transit traffic does not trigger the vulnerability. This issue only affects devices with IPv6 enabled and configured. Devices not configured to process IPv6 traffic are unaffected by this vulnerability. This issue was found during internal product security testing. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. Affected releases are Juniper Networks Junos OS 11.4 prior to 11.4R13-S3; 12.3 prior to 12.3R3-S4; 12.3X48 prior to 12.3X48-D30; 13.3 prior to 13.3R10, 13.3R4-S11; 14.1 prior to 14.1R2-S8, 14.1R4-S12, 14.1R8; 14.1X53 prior to 14.1X53-D28, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R3-S10, 14.2R4-S7, 14.2R6; 15.1 prior to 15.1F2-S5, 15.1F5-S2, 15.1F6, 15.1R3; 15.1X49 prior to 15.1X49-D40; 15.1X53 prior to 15.1X53-D57, 15.1X53-D70. |
| It was discovered that cf-release v231 and lower, Pivotal Cloud Foundry Elastic Runtime 1.5.x versions prior to 1.5.17 and Pivotal Cloud Foundry Elastic Runtime 1.6.x versions prior to 1.6.18 do not properly enforce disk quotas in certain cases. An attacker could use an improper disk quota value to bypass enforcement and consume all the disk on DEAs/CELLs causing a potential denial of service for other applications. |
| A HTTP/2 implementation built using any version of the Python priority library prior to version 1.2.0 could be targeted by a malicious peer by having that peer assign priority information for every possible HTTP/2 stream ID. The priority tree would happily continue to store the priority information for each stream, and would therefore allocate unbounded amounts of memory. Attempting to actually use a tree like this would also cause extremely high CPU usage to maintain the tree. |
| The eepro100 emulator in QEMU qemu-kvm blank allows local guest users to cause a denial of service (application crash and infinite loop) via vectors involving the command block list. |
| Candlepin allows remote attackers to obtain sensitive information by obtaining Java exception statements as a result of excessive web traffic. |
| The semver package before 4.3.2 for Node.js allows attackers to cause a denial of service (CPU consumption) via a long version string, aka a "regular expression denial of service (ReDoS)." |
| A HTTP/2 implementation built using any version of the Python HPACK library between v1.0.0 and v2.2.0 could be targeted for a denial of service attack, specifically a so-called "HPACK Bomb" attack. This attack occurs when an attacker inserts a header field that is exactly the size of the HPACK dynamic header table into the dynamic header table. The attacker can then send a header block that is simply repeated requests to expand that field in the dynamic table. This can lead to a gigantic compression ratio of 4,096 or better, meaning that 16kB of data can decompress to 64MB of data on the target machine. |
| A vulnerability in SSL traffic decryption for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause depletion of system memory, aka a Firepower Detection Engine SSL Decryption Memory Consumption Denial of Service vulnerability. If this memory leak persists over time, a denial of service (DoS) condition could develop because traffic can cease to be forwarded through the device. The vulnerability is due to an error in how the Firepower Detection Snort Engine handles SSL traffic decryption and notifications to and from the Adaptive Security Appliance (ASA) handler. An attacker could exploit this vulnerability by sending a steady stream of malicious Secure Sockets Layer (SSL) traffic through the device. An exploit could allow the attacker to cause a DoS condition when the device runs low on system memory. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.0.1 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances. Cisco Bug IDs: CSCve02069. |
| tcprewrite in tcpreplay before 4.1.2 allows remote attackers to cause a denial of service (segmentation fault) via a large frame, a related issue to CVE-2017-14266. |
| Multiple memory leaks in the caption and label handling code in ImageMagick allow remote attackers to cause a denial of service (memory consumption) via unspecified vectors. |
| Memory leak in coders/rle.c in ImageMagick allows remote attackers to cause a denial of service (memory consumption) via a crafted rle file. |
| Zyxel USG50 Security Appliance and NWA3560-N Access Point allow remote attackers to cause a denial of service (CPU consumption) via a flood of ICMPv4 Port Unreachable packets. |
