| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()
Fix a user triggerable leak on the system call failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix null-ptr-deref in lec_arp_clear_vccs
syzkaller reported a null-ptr-deref in lec_arp_clear_vccs().
This issue can be easily reproduced using the syzkaller reproducer.
In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by
multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).
When the underlying VCC is closed, lec_vcc_close() iterates over all
ARP entries and calls lec_arp_clear_vccs() for each matched entry.
For example, when lec_vcc_close() iterates through the hlists in
priv->lec_arp_empty_ones or other ARP tables:
1. In the first iteration, for the first matched ARP entry sharing the VCC,
lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)
and sets vcc->user_back to NULL.
2. In the second iteration, for the next matched ARP entry sharing the same
VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from
vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it
via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.
Fix this by adding a null check for vpriv before dereferencing
it. If vpriv is already NULL, it means the VCC has been cleared
by a previous call, so we can safely skip the cleanup and just
clear the entry's vcc/recv_vcc pointers.
The entire cleanup block (including vcc_release_async()) is placed inside
the vpriv guard because a NULL vpriv indicates the VCC has already been
fully released by a prior iteration — repeating the teardown would
redundantly set flags and trigger callbacks on an already-closing socket.
The Fixes tag points to the initial commit because the entry->vcc path has
been vulnerable since the original code. The entry->recv_vcc path was later
added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back")
with the same pattern, and both paths are fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit
teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit
through slave devices, but does not update skb->dev to the slave device
beforehand.
When a gretap tunnel is a TEQL slave, the transmit path reaches
iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0
master) and later calls iptunnel_xmit_stats(dev, pkt_len). This
function does:
get_cpu_ptr(dev->tstats)
Since teql_master_setup() does not set dev->pcpu_stat_type to
NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats
for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes
NULL + __per_cpu_offset[cpu], resulting in a page fault.
BUG: unable to handle page fault for address: ffff8880e6659018
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 68bc067 P4D 68bc067 PUD 0
Oops: Oops: 0002 [#1] SMP KASAN PTI
RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89)
Call Trace:
<TASK>
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
__gre_xmit (net/ipv4/ip_gre.c:478)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
teql_master_xmit (net/sched/sch_teql.c:319)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
neigh_direct_output (net/core/neighbour.c:1660)
ip_finish_output2 (net/ipv4/ip_output.c:237)
__ip_finish_output.part.0 (net/ipv4/ip_output.c:315)
ip_mc_output (net/ipv4/ip_output.c:369)
ip_send_skb (net/ipv4/ip_output.c:1508)
udp_send_skb (net/ipv4/udp.c:1195)
udp_sendmsg (net/ipv4/udp.c:1485)
inet_sendmsg (net/ipv4/af_inet.c:859)
__sys_sendto (net/socket.c:2206)
Fix this by setting skb->dev = slave before calling
netdev_start_xmit(), so that tunnel xmit functions see the correct
slave device with properly allocated tstats. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels
IDLETIMER revision 0 rules reuse existing timers by label and always call
mod_timer() on timer->timer.
If the label was created first by revision 1 with XT_IDLETIMER_ALARM,
the object uses alarm timer semantics and timer->timer is never initialized.
Reusing that object from revision 0 causes mod_timer() on an uninitialized
timer_list, triggering debugobjects warnings and possible panic when
panic_on_warn=1.
Fix this by rejecting revision 0 rule insertion when an existing timer with
the same label is of ALARM type. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix unprivileged local user can do privileged policy management
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gate: snapshot parameters with RCU on replace
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error
In commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix
URB memory leak"), the URB was re-anchored before usb_submit_urb() in
gs_usb_receive_bulk_callback() to prevent a leak of this URB during
cleanup.
However, this patch did not take into account that usb_submit_urb() could
fail. The URB remains anchored and
usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops
infinitely since the anchor list never becomes empty.
To fix the bug, unanchor the URB when an usb_submit_urb() error occurs,
also print an info message. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix refcount leak when invalid session is found on session lookup
When a session is found but its state is not SMB2_SESSION_VALID, It
indicates that no valid session was found, but it is missing to decrement
the reference count acquired by the session lookup, which results in
a reference count leak. This patch fixes the issue by explicitly calling
ksmbd_user_session_put to release the reference to the session. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser
The Information Element (IE) parser rtw_get_ie() trusted the length
byte of each IE without validating that the IE body (len bytes after
the 2-byte header) fits inside the remaining frame buffer. A malformed
frame can advertise an IE length larger than the available data, causing
the parser to increment its pointer beyond the buffer end. This results
in out-of-bounds reads or, depending on the pattern, an infinite loop.
Fix by validating that (offset + 2 + len) does not exceed the limit
before accepting the IE or advancing to the next element.
This prevents OOB reads and ensures the parser terminates safely on
malformed frames. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: add seqadj extension for natted connections
Sequence adjustment may be required for FTP traffic with PASV/EPSV modes.
due to need to re-write packet payload (IP, port) on the ftp control
connection. This can require changes to the TCP length and expected
seq / ack_seq.
The easiest way to reproduce this issue is with PASV mode.
Example ruleset:
table inet ftp_nat {
ct helper ftp_helper {
type "ftp" protocol tcp
l3proto inet
}
chain prerouting {
type filter hook prerouting priority 0; policy accept;
tcp dport 21 ct state new ct helper set "ftp_helper"
}
}
table ip nat {
chain prerouting {
type nat hook prerouting priority -100; policy accept;
tcp dport 21 dnat ip prefix to ip daddr map {
192.168.100.1 : 192.168.13.2/32 }
}
chain postrouting {
type nat hook postrouting priority 100 ; policy accept;
tcp sport 21 snat ip prefix to ip saddr map {
192.168.13.2 : 192.168.100.1/32 }
}
}
Note that the ftp helper gets assigned *after* the dnat setup.
The inverse (nat after helper assign) is handled by an existing
check in nf_nat_setup_info() and will not show the problem.
Topoloy:
+-------------------+ +----------------------------------+
| FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 |
+-------------------+ +----------------------------------+
|
+-----------------------+
| Client: 192.168.100.2 |
+-----------------------+
ftp nat changes do not work as expected in this case:
Connected to 192.168.100.1.
[..]
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> ls
227 Entering passive mode (192,168,100,1,209,129).
421 Service not available, remote server has closed connection.
Kernel logs:
Missing nfct_seqadj_ext_add() setup call
WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41
[..]
__nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]
nf_nat_ftp+0x142/0x280 [nf_nat_ftp]
help+0x4d1/0x880 [nf_conntrack_ftp]
nf_confirm+0x122/0x2e0 [nf_conntrack]
nf_hook_slow+0x3c/0xb0
..
Fix this by adding the required extension when a conntrack helper is assigned
to a connection that has a nat binding. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: Set fb_display[i]->mode to NULL when the mode is released
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()
nvme_fc_delete_assocation() waits for pending I/O to complete before
returning, and an error can cause ->ioerr_work to be queued after
cancel_work_sync() had been called. Move the call to cancel_work_sync() to
be after nvme_fc_delete_association() to ensure ->ioerr_work is not running
when the nvme_fc_ctrl object is freed. Otherwise the following can occur:
[ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL
[ 1135.917705] ------------[ cut here ]------------
[ 1135.922336] kernel BUG at lib/list_debug.c:52!
[ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary)
[ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025
[ 1135.950969] Workqueue: 0x0 (nvme-wq)
[ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b
[ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046
[ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000
[ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0
[ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08
[ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100
[ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0
[ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000
[ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0
[ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1136.055910] PKRU: 55555554
[ 1136.058623] Call Trace:
[ 1136.061074] <TASK>
[ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.071898] ? move_linked_works+0x4a/0xa0
[ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.081744] ? __die_body.cold+0x8/0x12
[ 1136.085584] ? die+0x2e/0x50
[ 1136.088469] ? do_trap+0xca/0x110
[ 1136.091789] ? do_error_trap+0x65/0x80
[ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.101289] ? exc_invalid_op+0x50/0x70
[ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20
[ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.120806] move_linked_works+0x4a/0xa0
[ 1136.124733] worker_thread+0x216/0x3a0
[ 1136.128485] ? __pfx_worker_thread+0x10/0x10
[ 1136.132758] kthread+0xfa/0x240
[ 1136.135904] ? __pfx_kthread+0x10/0x10
[ 1136.139657] ret_from_fork+0x31/0x50
[ 1136.143236] ? __pfx_kthread+0x10/0x10
[ 1136.146988] ret_from_fork_asm+0x1a/0x30
[ 1136.150915] </TASK> |
