| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix crash when the event log is disabled
If reporting errors to the event log is not supported by the hardware,
and an error that causes Function Level Reset (FLR) is received, the
driver will try to restore the event log even if it was not allocated.
Also, only try to free the event log if it was properly allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free in update_super_work when racing with umount
Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: publish jinode after initialization
ext4_inode_attach_jinode() publishes ei->jinode to concurrent users.
It used to set ei->jinode before jbd2_journal_init_jbd_inode(),
allowing a reader to observe a non-NULL jinode with i_vfs_inode
still unset.
The fast commit flush path can then pass this jinode to
jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and
may crash.
Below is the crash I observe:
```
BUG: unable to handle page fault for address: 000000010beb47f4
PGD 110e51067 P4D 110e51067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
RIP: 0010:xas_find_marked+0x3d/0x2e0
Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02
RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246
RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003
RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10
RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec
R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000
R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88
FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
filemap_get_folios_tag+0x87/0x2a0
__filemap_fdatawait_range+0x5f/0xd0
? srso_alias_return_thunk+0x5/0xfbef5
? __schedule+0x3e7/0x10c0
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? cap_safe_nice+0x37/0x70
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
filemap_fdatawait_range_keep_errors+0x12/0x40
ext4_fc_commit+0x697/0x8b0
? ext4_file_write_iter+0x64b/0x950
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? vfs_write+0x356/0x480
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
ext4_sync_file+0xf7/0x370
do_fsync+0x3b/0x80
? syscall_trace_enter+0x108/0x1d0
__x64_sys_fdatasync+0x16/0x20
do_syscall_64+0x62/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
```
Fix this by initializing the jbd2_inode first.
Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after
initialization. Readers use READ_ONCE() to fetch the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix race between concurrent split and refault
The splitting of a PUD entry in walk_pud_range() can race with a
concurrent thread refaulting the PUD leaf entry causing it to try walking
a PMD range that has disappeared.
An example and reproduction of this is to try reading numa_maps of a
process while VFIO-PCI is setting up DMA (specifically the
vfio_pin_pages_remote call) on a large BAR for that process.
This will trigger a kernel BUG:
vfio-pci 0000:03:00.0: enabling device (0000 -> 0002)
BUG: unable to handle page fault for address: ffffa23980000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
...
RIP: 0010:walk_pgd_range+0x3b5/0x7a0
Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24
28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06
9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74
RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287
RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0
RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000
R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000
R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000
FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
__walk_page_range+0x195/0x1b0
walk_page_vma+0x62/0xc0
show_numa_map+0x12b/0x3b0
seq_read_iter+0x297/0x440
seq_read+0x11d/0x140
vfs_read+0xc2/0x340
ksys_read+0x5f/0xe0
do_syscall_64+0x68/0x130
? get_page_from_freelist+0x5c2/0x17e0
? mas_store_prealloc+0x17e/0x360
? vma_set_page_prot+0x4c/0xa0
? __alloc_pages_noprof+0x14e/0x2d0
? __mod_memcg_lruvec_state+0x8d/0x140
? __lruvec_stat_mod_folio+0x76/0xb0
? __folio_mod_stat+0x26/0x80
? do_anonymous_page+0x705/0x900
? __handle_mm_fault+0xa8d/0x1000
? __count_memcg_events+0x53/0xf0
? handle_mm_fault+0xa5/0x360
? do_user_addr_fault+0x342/0x640
? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0
? irqentry_exit_to_user_mode+0x24/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe88464f47e
Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f
84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00
f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e
RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003
RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000
R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
Fix this by validating the PUD entry in walk_pmd_range() using a stable
snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the
walk via ACTION_AGAIN instead of descending further. This mirrors the
retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the
PTE is not being got by pte_offset_map_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: check contexts->nr in repeat_call_fn
damon_sysfs_repeat_call_fn() calls damon_sysfs_upd_tuned_intervals(),
damon_sysfs_upd_schemes_stats(), and
damon_sysfs_upd_schemes_effective_quotas() without checking contexts->nr.
If nr_contexts is set to 0 via sysfs while DAMON is running, these
functions dereference contexts_arr[0] and cause a NULL pointer
dereference. Add the missing check.
For example, the issue can be reproduced using DAMON sysfs interface and
DAMON user-space tool (damo) [1] like below.
$ sudo damo start --refresh_interval 1s
$ echo 0 | sudo tee \
/sys/kernel/mm/damon/admin/kdamonds/0/contexts/nr_contexts |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: fix param_ctx leak on damon_sysfs_new_test_ctx() failure
Patch series "mm/damon/sysfs: fix memory leak and NULL dereference
issues", v4.
DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer
dereference when a privileged user make wrong sequences of control. Fix
those.
This patch (of 3):
When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(),
param_ctx is leaked because the early return skips the cleanup at the out
label. Destroy param_ctx before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Fix double free in dma-buf feature
The error path through vfio_pci_core_feature_dma_buf() ignores its
own advice to only use dma_buf_put() after dma_buf_export(), instead
falling through the entire unwind chain. In the unlikely event that
we encounter file descriptor exhaustion, this can result in an
unbalanced refcount on the vfio device and double free of allocated
objects.
Avoid this by moving the "put" directly into the error path and return
the errno rather than entering the unwind chain. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| ApostropheCMS is an open-source Node.js content management system. Versions 4.28.0 and prior contain a stored cross-site scripting vulnerability in SEO-related fields (SEO Title and Meta Description), where user-controlled input is rendered without proper output encoding into HTML contexts including <title> tags, <meta> attributes, and JSON-LD structured data. An attacker can inject a payload such as "></title><script>alert(1)</script> to break out of the intended HTML context and execute arbitrary JavaScript in the browser of any authenticated user who views the affected page. This can be leveraged to perform authenticated API requests, access sensitive data such as usernames, email addresses, and roles via internal APIs, and exfiltrate it to an attacker-controlled server. This issue has been fixed in version 4.29.0. |
| An Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') [CWE-22] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.4, FortiOS 7.4.0 through 7.4.9, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiPAM 1.7.0, FortiPAM 1.6 all versions, FortiPAM 1.5 all versions, FortiPAM 1.4 all versions, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.6.0 through 7.6.4, FortiProxy 7.4.0 through 7.4.11, FortiProxy 7.2 all versions, FortiProxy 7.0 all versions, FortiSwitchManager 7.2.0 through 7.2.7, FortiSwitchManager 7.0.0 through 7.0.6 may allow an authenticated attacker with admin profile and at least read-write permissions to write or delete arbitrary files via specific CLI commands. |
| Adobe Connect versions 24.0 and earlier are affected by a Deserialization of Untrusted Data vulnerability that could lead to arbitrary code execution by an attacker. Exploitation of this issue does require user interaction and scope is changed. |
| An improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.4, FortiAnalyzer 7.4.0 through 7.4.7, FortiAnalyzer 7.2 all versions, FortiAnalyzer 7.0 all versions, FortiAnalyzer Cloud 7.6.0 through 7.6.4, FortiAnalyzer Cloud 7.4.0 through 7.4.7, FortiAnalyzer Cloud 7.2 all versions, FortiAnalyzer Cloud 7.0 all versions, FortiManager 7.6.0 through 7.6.4, FortiManager 7.4.0 through 7.4.7, FortiManager 7.2 all versions, FortiManager 7.0 all versions, FortiManager Cloud 7.6.0 through 7.6.4, FortiManager Cloud 7.4.0 through 7.4.7, FortiManager Cloud 7.2 all versions, FortiManager Cloud 7.0 all versions may allow a privileged attacker to delete files from the underlying filesystem via crafted CLI requests. |
| A vulnerability in the web-based management interface of Cisco IMC could allow an unauthenticated, remote attacker to conduct a reflected XSS attack against a user of the interface.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information. |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with administrative privileges to conduct a stored XSS attack against a user of the interface.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information. |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with administrative privileges to conduct a stored XSS attack against a user of the interface.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information. |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with administrative privileges to conduct a stored XSS attack against a user of the interface.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information. |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with administrative privileges to conduct a stored XSS attack against a user of the interface.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information. |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with read-only privileges to perform command injection attacks on an affected system and execute arbitrary commands as the root user.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with admin-level privileges to perform command injection attacks on an affected system and execute arbitrary commands as the root user.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. Cisco has assigned this vulnerability a Security Impact Rating (SIR) of High, rather than Medium as the score indicates, because additional security implications could occur once the attacker has become root. |
