| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following version:
QTS 5.2.8.3332 build 20251128 and later |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following version:
QTS 5.2.8.3332 build 20251128 and later |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.1.3250 build 20250912 and later |
| A buffer overflow vulnerability has been reported to affect License Center. If a remote attacker gains an administrator account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following version:
License Center 2.0.36 and later |
| An out-of-bounds read vulnerability has been reported to affect License Center. If a remote attacker gains a user account, they can then exploit the vulnerability to obtain secret data.
We have already fixed the vulnerability in the following version:
License Center 2.0.36 and later |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.0.3192 build 20250716 and later |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.0.3192 build 20250716 and later |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.0.3192 build 20250716 and later |
| An out-of-bounds read vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to obtain secret data.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.1.3250 build 20250912 and later |
| An out-of-bounds read vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to obtain secret data.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.1.3250 build 20250912 and later |
| An out-of-bounds read vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to obtain secret data.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.1.3250 build 20250912 and later |
| A vulnerability has been found in UTT 进取 512W up to 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formP2PLimitConfig. Such manipulation of the argument except leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Cobian Backup 11 Gravity 11.2.0.582 contains a denial of service vulnerability in the FTP password input field that allows attackers to crash the application. Attackers can generate a specially crafted 800-byte buffer and paste it into the password field to trigger an application crash. |
| In the Linux kernel, the following vulnerability has been resolved:
x86: stop playing stack games in profile_pc()
The 'profile_pc()' function is used for timer-based profiling, which
isn't really all that relevant any more to begin with, but it also ends
up making assumptions based on the stack layout that aren't necessarily
valid.
Basically, the code tries to account the time spent in spinlocks to the
caller rather than the spinlock, and while I support that as a concept,
it's not worth the code complexity or the KASAN warnings when no serious
profiling is done using timers anyway these days.
And the code really does depend on stack layout that is only true in the
simplest of cases. We've lost the comment at some point (I think when
the 32-bit and 64-bit code was unified), but it used to say:
Assume the lock function has either no stack frame or a copy
of eflags from PUSHF.
which explains why it just blindly loads a word or two straight off the
stack pointer and then takes a minimal look at the values to just check
if they might be eflags or the return pc:
Eflags always has bits 22 and up cleared unlike kernel addresses
but that basic stack layout assumption assumes that there isn't any lock
debugging etc going on that would complicate the code and cause a stack
frame.
It causes KASAN unhappiness reported for years by syzkaller [1] and
others [2].
With no real practical reason for this any more, just remove the code.
Just for historical interest, here's some background commits relating to
this code from 2006:
0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels")
31679f38d886 ("Simplify profile_pc on x86-64")
and a code unification from 2009:
ef4512882dbe ("x86: time_32/64.c unify profile_pc")
but the basics of this thing actually goes back to before the git tree. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
Fix the dtc warnings:
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on
deprecated #address-cells/#size-cells handling"):
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0
Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0
The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe
port nodes for ls7a"), which has fixed the issue for ls2k (despite its
subject mentions ls7a). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Fix MST sideband message body length check
Fix the MST sideband message body length check, which must be at least 1
byte accounting for the message body CRC (aka message data CRC) at the
end of the message.
This fixes a case where an MST branch device returns a header with a
correct header CRC (indicating a correctly received body length), with
the body length being incorrectly set to 0. This will later lead to a
memory corruption in drm_dp_sideband_append_payload() and the following
errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25
index -1 is out of range for type 'u8 [48]'
Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256)
Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper] |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: array-index-out-of-bounds fix in dtReadFirst
The value of stbl can be sometimes out of bounds due
to a bad filesystem. Added a check with appopriate return
of error code in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix shift-out-of-bounds in dbSplit
When dmt_budmin is less than zero, it causes errors
in the later stages. Added a check to return an error beforehand
in dbAllocCtl itself. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix array-index-out-of-bounds in jfs_readdir
The stbl might contain some invalid values. Added a check to
return error code in that case. |
