| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
__build_packet_message() manually constructs the NFULA_PAYLOAD netlink
attribute using skb_put() and skb_copy_bits(), bypassing the standard
nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes
are allocated (including NLA alignment padding), only data_len bytes
of actual packet data are copied. The trailing nla_padlen(data_len)
bytes (1-3 when data_len is not 4-byte aligned) are never initialized,
leaking stale heap contents to userspace via the NFLOG netlink socket.
Replace the manual attribute construction with nla_reserve(), which
handles the tailroom check, header setup, and padding zeroing via
__nla_reserve(). The subsequent skb_copy_bits() fills in the payload
data on top of the properly initialized attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
process_sdp() declares union nf_inet_addr rtp_addr on the stack and
passes it to the nf_nat_sip sdp_session hook after walking the SDP
media descriptions. However rtp_addr is only initialized inside the
media loop when a recognized media type with a non-zero port is found.
If the SDP body contains no m= lines, only inactive media sections
(m=audio 0 ...) or only unrecognized media types, rtp_addr is never
assigned. Despite that, the function still calls hooks->sdp_session()
with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack
value as an IP address and rewrite the SDP session owner and connection
lines with it.
With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this
results in the session-level o= and c= addresses being rewritten to
0.0.0.0 for inactive SDP sessions. Without stack auto-init the
rewritten address is whatever happened to be on the stack.
Fix this by pre-initializing rtp_addr from the session-level connection
address (caddr) when available, and tracking via a have_rtp_addr flag
whether any valid address was established. Skip the sdp_session hook
entirely when no valid address exists. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: reject FRMR registration before IB connection is established
rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data
and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a
fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with
i_cm_id = NULL because the connection worker has not yet called
rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with
RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses
the control message before any connection establishment, allowing
rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the
kernel.
The existing guard in rds_ib_reg_frmr() only checks for !ic (added in
commit 9e630bcb7701), which does not catch this case since ic is allocated
early and is always non-NULL once the connection object exists.
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920
Call Trace:
rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167)
rds_ib_map_frmr (net/rds/ib_frmr.c:252)
rds_ib_reg_frmr (net/rds/ib_frmr.c:430)
rds_ib_get_mr (net/rds/ib_rdma.c:615)
__rds_rdma_map (net/rds/rdma.c:295)
rds_cmsg_rdma_map (net/rds/rdma.c:860)
rds_sendmsg (net/rds/send.c:1363)
____sys_sendmsg
do_syscall_64
Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all
non-NULL before proceeding with FRMR registration, mirroring the guard
already present in rds_ib_post_inv(). Return -ENODEV when the connection
is not ready, which the existing error handling in rds_cmsg_send() converts
to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to
start the connection worker. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: fix divide-by-zero in rtsc_min()
m2sm() converts a u32 slope to a u64 scaled value. For large inputs
(e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores
the difference of two such u64 values in a u32 variable `dsm` and
uses it as a divisor. When the difference is exactly 2^32 the
truncation yields zero, causing a divide-by-zero oops in the
concave-curve intersection path:
Oops: divide error: 0000
RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601)
Call Trace:
init_ed (net/sched/sch_hfsc.c:629)
hfsc_enqueue (net/sched/sch_hfsc.c:1569)
[...]
Widen `dsm` to u64 and replace do_div() with div64_u64() so the full
difference is preserved. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
======================================================================= |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mrp: reject zero test interval to avoid OOM panic
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix use-after-free in bond_xmit_broadcast()
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
================================================================== |
| A certificate validation vulnerability in Palo Alto Networks Autonomous Digital Experience Manager on Windows allows an unauthenticated attacker with adjacent network access to execute arbitrary code with NT AUTHORITY\SYSTEM privileges. |
| A Stored Cross-site Scripting (XSS) vulnerability affecting Document Management in ENOVIA Collaborative Industry Innovator from Release 3DEXPERIENCE R2023x through Release 3DEXPERIENCE R2025x allows an attacker to execute arbitrary script code in user's browser session. |
| UAF vulnerability in the communication module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| UAF vulnerability in the kernel module.
Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. |
| A problem with a protection mechanism in the Palo Alto Networks Cortex XDR agent on Windows allows a local Windows administrator to disable the agent. This issue may be leveraged by malware to perform malicious activity without detection. |
| Race condition vulnerability in the thermal management module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Race condition vulnerability in the power consumption statistics module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass. |
