Export limit exceeded: 350813 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 80673 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (80673 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53675 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix possible desc_ptr out-of-bounds accesses Sanitize possible desc_ptr out-of-bounds accesses in ses_enclosure_data_process(). | ||||
| CVE-2023-53676 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show() The function lio_target_nacl_info_show() uses sprintf() in a loop to print details for every iSCSI connection in a session without checking for the buffer length. With enough iSCSI connections it's possible to overflow the buffer provided by configfs and corrupt the memory. This patch replaces sprintf() with sysfs_emit_at() that checks for buffer boundries. | ||||
| CVE-2023-53668 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix deadloop issue on reading trace_pipe Soft lockup occurs when reading file 'trace_pipe': watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488] [...] RIP: 0010:ring_buffer_empty_cpu+0xed/0x170 RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218 RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901 R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000 [...] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __find_next_entry+0x1a8/0x4b0 ? peek_next_entry+0x250/0x250 ? down_write+0xa5/0x120 ? down_write_killable+0x130/0x130 trace_find_next_entry_inc+0x3b/0x1d0 tracing_read_pipe+0x423/0xae0 ? tracing_splice_read_pipe+0xcb0/0xcb0 vfs_read+0x16b/0x490 ksys_read+0x105/0x210 ? __ia32_sys_pwrite64+0x200/0x200 ? switch_fpu_return+0x108/0x220 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Through the vmcore, I found it's because in tracing_read_pipe(), ring_buffer_empty_cpu() found some buffer is not empty but then it cannot read anything due to "rb_num_of_entries() == 0" always true, Then it infinitely loop the procedure due to user buffer not been filled, see following code path: tracing_read_pipe() { ... ... waitagain: tracing_wait_pipe() // 1. find non-empty buffer here trace_find_next_entry_inc() // 2. loop here try to find an entry __find_next_entry() ring_buffer_empty_cpu(); // 3. find non-empty buffer peek_next_entry() // 4. but peek always return NULL ring_buffer_peek() rb_buffer_peek() rb_get_reader_page() // 5. because rb_num_of_entries() == 0 always true here // then return NULL // 6. user buffer not been filled so goto 'waitgain' // and eventually leads to an deadloop in kernel!!! } By some analyzing, I found that when resetting ringbuffer, the 'entries' of its pages are not all cleared (see rb_reset_cpu()). Then when reducing the ringbuffer, and if some reduced pages exist dirty 'entries' data, they will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which cause wrong 'overrun' count and eventually cause the deadloop issue. To fix it, we need to clear every pages in rb_reset_cpu(). | ||||
| CVE-2025-39955 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect(). syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk in the TCP_ESTABLISHED state. [0] syzbot reused the server-side TCP Fast Open socket as a new client before the TFO socket completes 3WHS: 1. accept() 2. connect(AF_UNSPEC) 3. connect() to another destination As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes it to TCP_CLOSE and makes connect() possible, which restarts timers. Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the retransmit timer triggered the warning and the intended packet was not retransmitted. Let's call reqsk_fastopen_remove() in tcp_disconnect(). [0]: WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Modules linked in: CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293 RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017 RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400 RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8 R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540 R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0 FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0 Call Trace: <IRQ> tcp_write_timer (net/ipv4/tcp_timer.c:738) call_timer_fn (kernel/time/timer.c:1747) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372) timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135) tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035) __walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1)) tmigr_handle_remote (kernel/time/timer_migration.c:1096) handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580) irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35)) </IRQ> | ||||
| CVE-2023-53680 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL OPDESC() simply indexes into nfsd4_ops[] by the op's operation number, without range checking that value. It assumes callers are careful to avoid calling it with an out-of-bounds opnum value. nfsd4_decode_compound() is not so careful, and can invoke OPDESC() with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end of nfsd4_ops[]. | ||||
| CVE-2025-39966 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix race during abort for file descriptors fput() doesn't actually call file_operations release() synchronously, it puts the file on a work queue and it will be released eventually. This is normally fine, except for iommufd the file and the iommufd_object are tied to gether. The file has the object as it's private_data and holds a users refcount, while the object is expected to remain alive as long as the file is. When the allocation of a new object aborts before installing the file it will fput() the file and then go on to immediately kfree() the obj. This causes a UAF once the workqueue completes the fput() and tries to decrement the users refcount. Fix this by putting the core code in charge of the file lifetime, and call __fput_sync() during abort to ensure that release() is called before kfree. __fput_sync() is a bit too tricky to open code in all the object implementations. Instead the objects tell the core code where the file pointer is and the core will take care of the life cycle. If the object is successfully allocated then the file will hold a users refcount and the iommufd_object cannot be destroyed. It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an issue because close() is already using a synchronous version of fput(). The UAF looks like this: BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376 Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164 CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline] __refcount_dec include/linux/refcount.h:455 [inline] refcount_dec include/linux/refcount.h:476 [inline] iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376 __fput+0x402/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2025-39967 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: fix integer overflow in fbcon_do_set_font Fix integer overflow vulnerabilities in fbcon_do_set_font() where font size calculations could overflow when handling user-controlled font parameters. The vulnerabilities occur when: 1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount multiplication with user-controlled values that can overflow. 2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow 3. This results in smaller allocations than expected, leading to buffer overflows during font data copying. Add explicit overflow checking using check_mul_overflow() and check_add_overflow() kernel helpers to safety validate all size calculations before allocation. | ||||
| CVE-2025-39962 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix untrusted unsigned subtract Fix the following Smatch static checker warning: net/rxrpc/rxgk_app.c:65 rxgk_yfs_decode_ticket() warn: untrusted unsigned subtract. 'ticket_len - 10 * 4' by prechecking the length of what we're trying to extract in two places in the token and decoding for a response packet. Also use sizeof() on the struct we're extracting rather specifying the size numerically to be consistent with the other related statements. | ||||
| CVE-2025-39963 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix incorrect io_kiocb reference in io_link_skb In io_link_skb function, there is a bug where prev_notif is incorrectly assigned using 'nd' instead of 'prev_nd'. This causes the context validation check to compare the current notification with itself instead of comparing it with the previous notification. Fix by using the correct prev_nd parameter when obtaining prev_notif. | ||||
| CVE-2025-39960 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: acpi: initialize acpi_gpio_info struct Since commit 7c010d463372 ("gpiolib: acpi: Make sure we fill struct acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to __acpi_find_gpio() and later in the call stack info->quirks is used in acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver: [ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ [ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22 Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio() | ||||
| CVE-2025-39958 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Make attach succeed when the device was surprise removed When a PCI device is removed with surprise hotplug, there may still be attempts to attach the device to the default domain as part of tear down via (__iommu_release_dma_ownership()), or because the removal happens during probe (__iommu_probe_device()). In both cases zpci_register_ioat() fails with a cc value indicating that the device handle is invalid. This is because the device is no longer part of the instance as far as the hypervisor is concerned. Currently this leads to an error return and s390_iommu_attach_device() fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail() because attaching to the default domain must never fail. With the device fenced by the hypervisor no DMAs to or from memory are possible and the IOMMU translations have no effect. Proceed as if the registration was successful and let the hotplug event handling clean up the device. This is similar to how devices in the error state are handled since commit 59bbf596791b ("iommu/s390: Make attach succeed even if the device is in error state") except that for removal the domain will not be registered later. This approach was also previously discussed at the link. Handle both cases, error state and removal, in a helper which checks if the error needs to be propagated or ignored. Avoid magic number condition codes by using the pre-existing, but never used, defines for PCI load/store condition codes and rename them to reflect that they apply to all PCI instructions. | ||||
| CVE-2025-39957 | 1 Linux | 1 Linux Kernel | 2026-02-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: increase scan_ies_len for S1G Currently the S1G capability element is not taken into account for the scan_ies_len, which leads to a buffer length validation failure in ieee80211_prep_hw_scan() and subsequent WARN in __ieee80211_start_scan(). This prevents hw scanning from functioning. To fix ensure we accommodate for the S1G capability length. | ||||
| CVE-2025-33239 | 1 Nvidia | 1 Megatron-bridge | 2026-02-26 | 7.8 High |
| NVIDIA Megatron Bridge contains a vulnerability in a data merging tutorial, where malicious input could cause a code injection. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, and data tampering. | ||||
| CVE-2025-33240 | 1 Nvidia | 1 Megatron-bridge | 2026-02-26 | 7.8 High |
| NVIDIA Megatron Bridge contains a vulnerability in a data shuffling tutorial, where malicious input could cause a code injection. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, and data tampering. | ||||
| CVE-2026-1707 | 1 Pgadmin | 1 Pgadmin 4 | 2026-02-26 | 7.4 High |
| pgAdmin versions 9.11 are affected by a Restore restriction bypass via key disclosure vulnerability that occurs when running in server mode and performing restores from PLAIN-format dump files. An attacker with access to the pgAdmin web interface can observe an active restore operation, extract the `\restrict` key in real time, and race the restore process by overwriting the restore script with a payload that re-enables meta-commands using `\unrestrict <key>`. This results in reliable command execution on the pgAdmin host during the restore operation. | ||||
| CVE-2024-32902 | 1 Google | 1 Android | 2026-02-26 | 7.5 High |
| Remote prevention of access to cellular service with no user interaction (for example, crashing the cellular radio service with a malformed packet) | ||||
| CVE-2024-22795 | 1 Forescout | 1 Secureconnector | 2026-02-26 | 7 High |
| Insecure Permissions vulnerability in Forescout SecureConnector v.11.3.06.0063 allows a local attacker to escalate privileges via the Recheck Compliance Status component. | ||||
| CVE-2019-25363 | 2 Allok Soft, Alloksoft | 2 Wmv To Avi Mpeg Dvd Wmv Convertor, Wmv To Avi Mpeg Dvd Wmv Convertor | 2026-02-26 | 7.5 High |
| WMV to AVI MPEG DVD WMV Convertor 4.6.1217 contains a buffer overflow vulnerability that allows attackers to crash the application by providing an oversized license input. Attackers can generate a 6000-byte payload and paste it into the 'License Name and License Code' field to trigger an application crash. | ||||
| CVE-2025-27378 | 1 Altium | 2 Aes, On-prem Enterprise Server | 2026-02-26 | 8.6 High |
| AES contains a SQL injection vulnerability due to an inactive configuration that prevents the latest SQL parsing logic from being applied. When this configuration is not enabled, crafted input may be improperly handled, allowing attackers to inject and execute arbitrary SQL queries. | ||||
| CVE-2024-26477 | 1 Statping-ng | 1 Statping-ng | 2026-02-26 | 7.5 High |
| An issue in Statping-ng v.0.91.0 allows an attacker to obtain sensitive information via a crafted request to the api parameter of the oauth, amazon_sns, export endpoints. | ||||