Export limit exceeded: 17641 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17641 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54104 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op() 'op-cs' is copied in 'fun->mchip_number' which is used to access the 'mchip_offsets' and the 'rnb_gpio' arrays. These arrays have NAND_MAX_CHIPS elements, so the index must be below this limit. Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This would lead to out-of-bound accesses. | ||||
| CVE-2022-50854 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: virtual_ncidev: Fix memory leak in virtual_nci_send() skb should be free in virtual_nci_send(), otherwise kmemleak will report memleak. Steps for reproduction (simulated in qemu): cd tools/testing/selftests/nci make ./nci_dev BUG: memory leak unreferenced object 0xffff888107588000 (size 208): comm "nci_dev", pid 206, jiffies 4294945376 (age 368.248s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000008d94c8fd>] __alloc_skb+0x1da/0x290 [<00000000278bc7f8>] nci_send_cmd+0xa3/0x350 [<0000000081256a22>] nci_reset_req+0x6b/0xa0 [<000000009e721112>] __nci_request+0x90/0x250 [<000000005d556e59>] nci_dev_up+0x217/0x5b0 [<00000000e618ce62>] nfc_dev_up+0x114/0x220 [<00000000981e226b>] nfc_genl_dev_up+0x94/0xe0 [<000000009bb03517>] genl_family_rcv_msg_doit.isra.14+0x228/0x2d0 [<00000000b7f8c101>] genl_rcv_msg+0x35c/0x640 [<00000000c94075ff>] netlink_rcv_skb+0x11e/0x350 [<00000000440cfb1e>] genl_rcv+0x24/0x40 [<0000000062593b40>] netlink_unicast+0x43f/0x640 [<000000001d0b13cc>] netlink_sendmsg+0x73a/0xbf0 [<000000003272487f>] __sys_sendto+0x324/0x370 [<00000000ef9f1747>] __x64_sys_sendto+0xdd/0x1b0 [<000000001e437841>] do_syscall_64+0x3f/0x90 | ||||
| CVE-2025-40065 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Write hgatp register with valid mode bits According to the RISC-V Privileged Architecture Spec, when MODE=Bare is selected,software must write zero to the remaining fields of hgatp. We have detected the valid mode supported by the HW before, So using a valid mode to detect how many vmid bits are supported. | ||||
| CVE-2022-50822 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/restrack: Release MR restrack when delete The MR restrack also needs to be released when delete it, otherwise it cause memory leak as the task struct won't be released. | ||||
| CVE-2023-54287 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: imx: disable Ageing Timer interrupt request irq There maybe pending USR interrupt before requesting irq, however uart_add_one_port has not executed, so there will be kernel panic: [ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre ss 0000000000000080 [ 0.802701] Mem abort info: [ 0.805367] ESR = 0x0000000096000004 [ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.814033] SET = 0, FnV = 0 [ 0.816950] EA = 0, S1PTW = 0 [ 0.819950] FSC = 0x04: level 0 translation fault [ 0.824617] Data abort info: [ 0.827367] ISV = 0, ISS = 0x00000004 [ 0.831033] CM = 0, WnR = 0 [ 0.833866] [0000000000000080] user address but active_mm is swapper [ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 0.845953] Modules linked in: [ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1 [ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT) [ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0 [ 0.872283] lr : imx_uart_int+0xf8/0x1ec The issue only happends in the inmate linux when Jailhouse hypervisor enabled. The test procedure is: while true; do jailhouse enable imx8mp.cell jailhouse cell linux xxxx sleep 10 jailhouse cell destroy 1 jailhouse disable sleep 5 done And during the upper test, press keys to the 2nd linux console. When `jailhouse cell destroy 1`, the 2nd linux has no chance to put the uart to a quiese state, so USR1/2 may has pending interrupts. Then when `jailhosue cell linux xx` to start 2nd linux again, the issue trigger. In order to disable irqs before requesting them, both UCR1 and UCR2 irqs should be disabled, so here fix that, disable the Ageing Timer interrupt in UCR2 as UCR1 does. | ||||
| CVE-2025-40351 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat() The syzbot reported issue in hfsplus_delete_cat(): [ 70.682285][ T9333] ===================================================== [ 70.682943][ T9333] BUG: KMSAN: uninit-value in hfsplus_subfolders_dec+0x1d7/0x220 [ 70.683640][ T9333] hfsplus_subfolders_dec+0x1d7/0x220 [ 70.684141][ T9333] hfsplus_delete_cat+0x105d/0x12b0 [ 70.684621][ T9333] hfsplus_rmdir+0x13d/0x310 [ 70.685048][ T9333] vfs_rmdir+0x5ba/0x810 [ 70.685447][ T9333] do_rmdir+0x964/0xea0 [ 70.685833][ T9333] __x64_sys_rmdir+0x71/0xb0 [ 70.686260][ T9333] x64_sys_call+0xcd8/0x3cf0 [ 70.686695][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.687119][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.687646][ T9333] [ 70.687856][ T9333] Uninit was stored to memory at: [ 70.688311][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.688779][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.689231][ T9333] hfsplus_mknod+0x27f/0x600 [ 70.689730][ T9333] hfsplus_mkdir+0x5a/0x70 [ 70.690146][ T9333] vfs_mkdir+0x483/0x7a0 [ 70.690545][ T9333] do_mkdirat+0x3f2/0xd30 [ 70.690944][ T9333] __x64_sys_mkdir+0x9a/0xf0 [ 70.691380][ T9333] x64_sys_call+0x2f89/0x3cf0 [ 70.691816][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.692229][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.692773][ T9333] [ 70.692990][ T9333] Uninit was stored to memory at: [ 70.693469][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.693960][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.694438][ T9333] hfsplus_fill_super+0x21c1/0x2700 [ 70.694911][ T9333] mount_bdev+0x37b/0x530 [ 70.695320][ T9333] hfsplus_mount+0x4d/0x60 [ 70.695729][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.696167][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.696588][ T9333] do_new_mount+0x73e/0x1630 [ 70.697013][ T9333] path_mount+0x6e3/0x1eb0 [ 70.697425][ T9333] __se_sys_mount+0x733/0x830 [ 70.697857][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.698269][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.698704][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.699117][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.699730][ T9333] [ 70.699946][ T9333] Uninit was created at: [ 70.700378][ T9333] __alloc_pages_noprof+0x714/0xe60 [ 70.700843][ T9333] alloc_pages_mpol_noprof+0x2a2/0x9b0 [ 70.701331][ T9333] alloc_pages_noprof+0xf8/0x1f0 [ 70.701774][ T9333] allocate_slab+0x30e/0x1390 [ 70.702194][ T9333] ___slab_alloc+0x1049/0x33a0 [ 70.702635][ T9333] kmem_cache_alloc_lru_noprof+0x5ce/0xb20 [ 70.703153][ T9333] hfsplus_alloc_inode+0x5a/0xd0 [ 70.703598][ T9333] alloc_inode+0x82/0x490 [ 70.703984][ T9333] iget_locked+0x22e/0x1320 [ 70.704428][ T9333] hfsplus_iget+0x5c/0xba0 [ 70.704827][ T9333] hfsplus_btree_open+0x135/0x1dd0 [ 70.705291][ T9333] hfsplus_fill_super+0x1132/0x2700 [ 70.705776][ T9333] mount_bdev+0x37b/0x530 [ 70.706171][ T9333] hfsplus_mount+0x4d/0x60 [ 70.706579][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.707019][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.707444][ T9333] do_new_mount+0x73e/0x1630 [ 70.707865][ T9333] path_mount+0x6e3/0x1eb0 [ 70.708270][ T9333] __se_sys_mount+0x733/0x830 [ 70.708711][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.709158][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.709630][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.710053][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.710611][ T9333] [ 70.710842][ T9333] CPU: 3 UID: 0 PID: 9333 Comm: repro Not tainted 6.12.0-rc6-dirty #17 [ 70.711568][ T9333] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.712490][ T9333] ===================================================== [ 70.713085][ T9333] Disabling lock debugging due to kernel taint [ 70.713618][ T9333] Kernel panic - not syncing: kmsan.panic set ... [ 70.714159][ T9333] ---truncated--- | ||||
| CVE-2022-50781 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table() In the PP_OD_EDIT_VDDC_CURVE case the "input_index" variable is capped at 2 but not checked for negative values so it results in an out of bounds read. This value comes from the user via sysfs. | ||||
| CVE-2023-54003 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix GID entry ref leak when create_ah fails If AH create request fails, release sgid_attr to avoid GID entry referrence leak reported while releasing GID table | ||||
| CVE-2023-54138 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix NULL-deref on irq uninstall In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Patchwork: https://patchwork.freedesktop.org/patch/525104/ | ||||
| CVE-2022-50839 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential buffer head reference count leak As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to buffer head buffer head reference count leak. To solve above issue, update 'journal->j_fc_off' before return -EIO. | ||||
| CVE-2023-54186 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: fix pin_assignment_show This patch fixes negative indexing of buf array in pin_assignment_show when get_current_pin_assignments returns 0 i.e. no compatible pin assignments are found. BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c ... Call trace: dump_backtrace+0x110/0x204 dump_stack_lvl+0x84/0xbc print_report+0x358/0x974 kasan_report+0x9c/0xfc __do_kernel_fault+0xd4/0x2d4 do_bad_area+0x48/0x168 do_tag_check_fault+0x24/0x38 do_mem_abort+0x6c/0x14c el1_abort+0x44/0x68 el1h_64_sync_handler+0x64/0xa4 el1h_64_sync+0x78/0x7c pin_assignment_show+0x26c/0x33c dev_attr_show+0x50/0xc0 | ||||
| CVE-2023-54192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block We got a kernel panic if old_addr is NULL. https://bugzilla.kernel.org/show_bug.cgi?id=217266 BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] __f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] ? vfs_write+0x2ae/0x3f0 ? vfs_write+0x2ae/0x3f0 __x64_sys_ioctl+0x91/0xd0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f69095fe53f | ||||
| CVE-2022-50575 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource() As 'kdata.num' is user-controlled data, if user tries to allocate memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and messes up dmesg with a warning. Call trace: -> privcmd_ioctl --> privcmd_ioctl_mmap_resource Add __GFP_NOWARN in order to avoid too large allocation warning. This is detected by static analysis using smatch. | ||||
| CVE-2022-50668 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix deadlock due to mbcache entry corruption When manipulating xattr blocks, we can deadlock infinitely looping inside ext4_xattr_block_set() where we constantly keep finding xattr block for reuse in mbcache but we are unable to reuse it because its reference count is too big. This happens because cache entry for the xattr block is marked as reusable (e_reusable set) although its reference count is too big. When this inconsistency happens, this inconsistent state is kept indefinitely and so ext4_xattr_block_set() keeps retrying indefinitely. The inconsistent state is caused by non-atomic update of e_reusable bit. e_reusable is part of a bitfield and e_reusable update can race with update of e_referenced bit in the same bitfield resulting in loss of one of the updates. Fix the problem by using atomic bitops instead. This bug has been around for many years, but it became *much* easier to hit after commit 65f8b80053a1 ("ext4: fix race when reusing xattr blocks"). | ||||
| CVE-2023-53795 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: IOMMUFD_DESTROY should not increase the refcount syzkaller found a race where IOMMUFD_DESTROY increments the refcount: obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY); if (IS_ERR(obj)) return PTR_ERR(obj); iommufd_ref_to_users(obj); /* See iommufd_ref_to_users() */ if (!iommufd_object_destroy_user(ucmd->ictx, obj)) As part of the sequence to join the two existing primitives together. Allowing the refcount the be elevated without holding the destroy_rwsem violates the assumption that all temporary refcount elevations are protected by destroy_rwsem. Racing IOMMUFD_DESTROY with iommufd_object_destroy_user() will cause spurious failures: WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478 Modules linked in: CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477 Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41 RSP: 0018:ffffc90003067e08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500 R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88 R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0 Call Trace: <TASK> iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline] iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813 iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The solution is to not increment the refcount on the IOMMUFD_DESTROY path at all. Instead use the xa_lock to serialize everything. The refcount check == 1 and xa_erase can be done under a single critical region. This avoids the need for any refcount incrementing. It has the downside that if userspace races destroy with other operations it will get an EBUSY instead of waiting, but this is kind of racing is already dangerous. | ||||
| CVE-2023-53744 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: ti: pm33xx: Fix refcount leak in am33xx_pm_probe wkup_m3_ipc_get() takes refcount, which should be freed by wkup_m3_ipc_put(). Add missing refcount release in the error paths. | ||||
| CVE-2023-53715 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex Apparently the hex passphrase mechanism does not work on newer chips/firmware (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to the device. | ||||
| CVE-2023-53728 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Ensure timer ID search-loop limit is valid posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID which was stored by the last successful allocation. This is done in a loop searching the ID space for a free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But that's racy vs. establishing the starting point. That is read out lockless, which leads to the following problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add() if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a negative start value, i.e. -1, and the loop break never happens because the condition can never be true: if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock. | ||||
| CVE-2025-68369 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: init run lock for extend inode After setting the inode mode of $Extend to a regular file, executing the truncate system call will enter the do_truncate() routine, causing the run_lock uninitialized error reported by syzbot. Prior to patch 4e8011ffec79, if the inode mode of $Extend was not set to a regular file, the do_truncate() routine would not be entered. Add the run_lock initialization when loading $Extend. syzbot reported: INFO: trying to register non-static key. Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 assign_lock_key+0x133/0x150 kernel/locking/lockdep.c:984 register_lock_class+0x105/0x320 kernel/locking/lockdep.c:1299 __lock_acquire+0x99/0xd20 kernel/locking/lockdep.c:5112 lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868 down_write+0x96/0x1f0 kernel/locking/rwsem.c:1590 ntfs_set_size+0x140/0x200 fs/ntfs3/inode.c:860 ntfs_extend+0x1d9/0x970 fs/ntfs3/file.c:387 ntfs_setattr+0x2e8/0xbe0 fs/ntfs3/file.c:808 | ||||
| CVE-2025-68291 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose(). syzbot reported divide-by-zero in __tcp_select_window() by MPTCP socket. [0] We had a similar issue for the bare TCP and fixed in commit 499350a5a6e7 ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0"). Let's apply the same fix to mptcp_do_fastclose(). [0]: Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 6068 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:__tcp_select_window+0x824/0x1320 net/ipv4/tcp_output.c:3336 Code: ff ff ff 44 89 f1 d3 e0 89 c1 f7 d1 41 01 cc 41 21 c4 e9 a9 00 00 00 e8 ca 49 01 f8 e9 9c 00 00 00 e8 c0 49 01 f8 44 89 e0 99 <f7> 7c 24 1c 41 29 d4 48 bb 00 00 00 00 00 fc ff df e9 80 00 00 00 RSP: 0018:ffffc90003017640 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88807b469e40 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90003017730 R08: ffff888033268143 R09: 1ffff1100664d028 R10: dffffc0000000000 R11: ffffed100664d029 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000055557faa0500(0000) GS:ffff888126135000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f64a1912ff8 CR3: 0000000072122000 CR4: 00000000003526f0 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:281 [inline] __tcp_transmit_skb+0xbc7/0x3aa0 net/ipv4/tcp_output.c:1568 tcp_transmit_skb net/ipv4/tcp_output.c:1649 [inline] tcp_send_active_reset+0x2d1/0x5b0 net/ipv4/tcp_output.c:3836 mptcp_do_fastclose+0x27e/0x380 net/mptcp/protocol.c:2793 mptcp_disconnect+0x238/0x710 net/mptcp/protocol.c:3253 mptcp_sendmsg_fastopen+0x2f8/0x580 net/mptcp/protocol.c:1776 mptcp_sendmsg+0x1774/0x1980 net/mptcp/protocol.c:1855 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe5/0x270 net/socket.c:742 __sys_sendto+0x3bd/0x520 net/socket.c:2244 __do_sys_sendto net/socket.c:2251 [inline] __se_sys_sendto net/socket.c:2247 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2247 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66e998f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffff9acedb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f66e9be5fa0 RCX: 00007f66e998f749 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffff9acee10 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007f66e9be5fa0 R14: 00007f66e9be5fa0 R15: 0000000000000006 </TASK> | ||||