Export limit exceeded: 17061 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17061 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54036 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU The wifi + bluetooth combo chip RTL8723BU can leak memory (especially?) when it's connected to a bluetooth audio device. The busy bluetooth traffic generates lots of C2H (card to host) messages, which are not freed correctly. To fix this, move the dev_kfree_skb() call in rtl8xxxu_c2hcmd_callback() inside the loop where skb_dequeue() is called. The RTL8192EU leaks memory because the C2H messages are added to the queue and left there forever. (This was fine in the past because it probably wasn't sending any C2H messages until commit e542e66b7c2e ("wifi: rtl8xxxu: gen2: Turn on the rate control"). Since that commit it sends a C2H message when the TX rate changes.) To fix this, delete the check for rf_paths > 1 and the goto. Let the function process the C2H messages from RTL8192EU like the ones from the other chips. Theoretically the RTL8188FU could also leak like RTL8723BU, but it most likely doesn't send C2H messages frequently enough. This change was tested with RTL8723BU by Erhard F. I tested it with RTL8188FU and RTL8192EU. | ||||
| CVE-2023-54033 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps The LRU and LRU_PERCPU maps allocate a new element on update before locking the target hash table bucket. Right after that the maps try to lock the bucket. If this fails, then maps return -EBUSY to the caller without releasing the allocated element. This makes the element untracked: it doesn't belong to either of free lists, and it doesn't belong to the hash table, so can't be re-used; this eventually leads to the permanent -ENOMEM on LRU map updates, which is unexpected. Fix this by returning the element to the local free list if bucket locking fails. | ||||
| CVE-2023-54031 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa: Add queue index attr to vdpa_nl_policy for nlattr length check The vdpa_nl_policy structure is used to validate the nlattr when parsing the incoming nlmsg. It will ensure the attribute being described produces a valid nlattr pointer in info->attrs before entering into each handler in vdpa_nl_ops. That is to say, the missing part in vdpa_nl_policy may lead to illegal nlattr after parsing, which could lead to OOB read just like CVE-2023-3773. This patch adds the missing nla_policy for vdpa queue index attr to avoid such bugs. | ||||
| CVE-2023-54027 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: core: Prevent invalid memory access when there is no parent Commit 813665564b3d ("iio: core: Convert to use firmware node handle instead of OF node") switched the kind of nodes to use for label retrieval in device registration. Probably an unwanted change in that commit was that if the device has no parent then NULL pointer is accessed. This is what happens in the stock IIO dummy driver when a new entry is created in configfs: # mkdir /sys/kernel/config/iio/devices/dummy/foo BUG: kernel NULL pointer dereference, address: ... ... Call Trace: __iio_device_register iio_dummy_probe Since there seems to be no reason to make a parent device of an IIO dummy device mandatory, let’s prevent the invalid memory access in __iio_device_register when the parent device is NULL. With this change, the IIO dummy driver works fine with configfs. | ||||
| CVE-2023-54022 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential memory leaks at error path for UMP open The allocation and initialization errors at alloc_midi_urbs() that is called at MIDI 2.0 / UMP device are supposed to be handled at the caller side by invoking free_midi_urbs(). However, free_midi_urbs() loops only for ep->num_urbs entries, and since ep->num_entries wasn't updated yet at the allocation / init error in alloc_midi_urbs(), this entry won't be released. The intention of free_midi_urbs() is to release the whole elements, so change the loop size to NUM_URBS to scan over all elements for fixing the missed releases. Also, the call of free_midi_urbs() is missing at snd_usb_midi_v2_open(). Although it'll be released later at reopen/close or disconnection, it's better to release immediately at the error path. | ||||
| CVE-2023-54019 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/psi: use kernfs polling functions for PSI trigger polling Destroying psi trigger in cgroup_file_release causes UAF issues when a cgroup is removed from under a polling process. This is happening because cgroup removal causes a call to cgroup_file_release while the actual file is still alive. Destroying the trigger at this point would also destroy its waitqueue head and if there is still a polling process on that file accessing the waitqueue, it will step on the freed pointer: do_select vfs_poll do_rmdir cgroup_rmdir kernfs_drain_open_files cgroup_file_release cgroup_pressure_release psi_trigger_destroy wake_up_pollfree(&t->event_wait) // vfs_poll is unblocked synchronize_rcu kfree(t) poll_freewait -> UAF access to the trigger's waitqueue head Patch [1] fixed this issue for epoll() case using wake_up_pollfree(), however the same issue exists for synchronous poll() case. The root cause of this issue is that the lifecycles of the psi trigger's waitqueue and of the file associated with the trigger are different. Fix this by using kernfs_generic_poll function when polling on cgroup-specific psi triggers. It internally uses kernfs_open_node->poll waitqueue head with its lifecycle tied to the file's lifecycle. This also renders the fix in [1] obsolete, so revert it. [1] commit c2dbe32d5db5 ("sched/psi: Fix use-after-free in ep_remove_wait_queue()") | ||||
| CVE-2023-54015 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device In case devcom allocation is failed, mlx5 is always freeing the priv. However, this priv might have been allocated by a different thread, and freeing it might lead to use-after-free bugs. Fix it by freeing the priv only in case it was allocated by the running thread. | ||||
| CVE-2023-54012 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix stack overflow when LRO is disabled for virtual interfaces When the virtual interface's feature is updated, it synchronizes the updated feature for its own lower interface. This propagation logic should be worked as the iteration, not recursively. But it works recursively due to the netdev notification unexpectedly. This problem occurs when it disables LRO only for the team and bonding interface type. team0 | +------+------+-----+-----+ | | | | | team1 team2 team3 ... team200 If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE event to its own lower interfaces(team1 ~ team200). It is worked by netdev_sync_lower_features(). So, the NETDEV_FEAT_CHANGE notification logic of each lower interface work iteratively. But generated NETDEV_FEAT_CHANGE event is also sent to the upper interface too. upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own lower interfaces again. lower and upper interfaces receive this event and generate this event again and again. So, the stack overflow occurs. But it is not the infinite loop issue. Because the netdev_sync_lower_features() updates features before generating the NETDEV_FEAT_CHANGE event. Already synchronized lower interfaces skip notification logic. So, it is just the problem that iteration logic is changed to the recursive unexpectedly due to the notification mechanism. Reproducer: ip link add team0 type team ethtool -K team0 lro on for i in {1..200} do ip link add team$i master team0 type team ethtool -K team$i lro on done ethtool -K team0 lro off In order to fix it, the notifier_ctx member of bonding/team is introduced. | ||||
| CVE-2023-54006 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data-race around unix_tot_inflight. unix_tot_inflight is changed under spin_lock(unix_gc_lock), but unix_release_sock() reads it locklessly. Let's use READ_ONCE() for unix_tot_inflight. Note that the writer side was marked by commit 9d6d7f1cb67c ("af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress") BUG: KCSAN: data-race in unix_inflight / unix_release_sock write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1: unix_inflight+0x130/0x180 net/unix/scm.c:64 unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1832 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2493 ___sys_sendmsg+0xc6/0x140 net/socket.c:2547 __sys_sendmsg+0x94/0x140 net/socket.c:2576 __do_sys_sendmsg net/socket.c:2585 [inline] __se_sys_sendmsg net/socket.c:2583 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2583 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0: unix_release_sock+0x608/0x910 net/unix/af_unix.c:671 unix_release+0x59/0x80 net/unix/af_unix.c:1058 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1385 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 | ||||
| CVE-2023-54000 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix deadlock issue when externel_lb and reset are executed together When externel_lb and reset are executed together, a deadlock may occur: [ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds. [ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008 [ 3147.248045] Workqueue: hclge hclge_service_task [hclge] [ 3147.253957] Call trace: [ 3147.257093] __switch_to+0x7c/0xbc [ 3147.261183] __schedule+0x338/0x6f0 [ 3147.265357] schedule+0x50/0xe0 [ 3147.269185] schedule_preempt_disabled+0x18/0x24 [ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc [ 3147.279880] __mutex_lock_slowpath+0x1c/0x30 [ 3147.284839] mutex_lock+0x50/0x60 [ 3147.288841] rtnl_lock+0x20/0x2c [ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge] [ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge] [ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge] [ 3147.309718] hclge_service_task+0x2c/0x70 [hclge] [ 3147.315109] process_one_work+0x1d0/0x490 [ 3147.319805] worker_thread+0x158/0x3d0 [ 3147.324240] kthread+0x108/0x13c [ 3147.328154] ret_from_fork+0x10/0x18 In externel_lb process, the hns3 driver call napi_disable() first, then the reset happen, then the restore process of the externel_lb will fail, and will not call napi_enable(). When doing externel_lb again, napi_disable() will be double call, cause a deadlock of rtnl_lock(). This patch use the HNS3_NIC_STATE_DOWN state to protect the calling of napi_disable() and napi_enable() in externel_lb process, just as the usage in ndo_stop() and ndo_start(). | ||||
| CVE-2023-53999 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Fix internal port memory leak The flow rule can be splited, and the extra post_act rules are added to post_act table. It's possible to trigger memleak when the rule forwards packets from internal port and over tunnel, in the case that, for example, CT 'new' state offload is allowed. As int_port object is assigned to the flow attribute of post_act rule, and its refcnt is incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is not called, the refcnt is never decremented, then int_port is never freed. The kmemleak reports the following error: unreferenced object 0xffff888128204b80 (size 64): comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s) hex dump (first 32 bytes): 01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00 ................ 98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff .wgA.....wgA.... backtrace: [<00000000e992680d>] kmalloc_trace+0x27/0x120 [<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core] [<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core] [<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core] [<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core] [<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core] [<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core] [<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410 [<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower] [<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower] [<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010 [<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0 [<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360 [<0000000082dd6c8b>] netlink_unicast+0x438/0x710 [<00000000fc568f70>] netlink_sendmsg+0x794/0xc50 [<0000000016e92590>] sock_sendmsg+0xc5/0x190 So fix this by moving int_port cleanup code to the flow attribute free helper, which is used by all the attribute free cases. | ||||
| CVE-2022-50703 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() There are two refcount leak bugs in qcom_smsm_probe(): (1) The 'local_node' is escaped out from for_each_child_of_node() as the break of iteration, we should call of_node_put() for it in error path or when it is not used anymore. (2) The 'node' is escaped out from for_each_available_child_of_node() as the 'goto', we should call of_node_put() for it in goto target. | ||||
| CVE-2022-50701 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host SDIO may need addtional 511 bytes to align bus operation. If the tailroom of this skb is not big enough, we would access invalid memory region. For low level operation, increase skb size to keep valid memory access in SDIO host. Error message: [69.951] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0xe9/0x1a0 [69.951] Read of size 64 at addr ffff88811c9cf000 by task kworker/u16:7/451 [69.951] CPU: 4 PID: 451 Comm: kworker/u16:7 Tainted: G W OE 6.1.0-rc5 #1 [69.951] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [69.951] Call Trace: [69.951] <TASK> [69.952] dump_stack_lvl+0x49/0x63 [69.952] print_report+0x171/0x4a8 [69.952] kasan_report+0xb4/0x130 [69.952] kasan_check_range+0x149/0x1e0 [69.952] memcpy+0x24/0x70 [69.952] sg_copy_buffer+0xe9/0x1a0 [69.952] sg_copy_to_buffer+0x12/0x20 [69.952] __command_write_data.isra.0+0x23c/0xbf0 [vub300] [69.952] vub300_cmndwork_thread+0x17f3/0x58b0 [vub300] [69.952] process_one_work+0x7ee/0x1320 [69.952] worker_thread+0x53c/0x1240 [69.952] kthread+0x2b8/0x370 [69.952] ret_from_fork+0x1f/0x30 [69.952] </TASK> [69.952] Allocated by task 854: [69.952] kasan_save_stack+0x26/0x50 [69.952] kasan_set_track+0x25/0x30 [69.952] kasan_save_alloc_info+0x1b/0x30 [69.952] __kasan_kmalloc+0x87/0xa0 [69.952] __kmalloc_node_track_caller+0x63/0x150 [69.952] kmalloc_reserve+0x31/0xd0 [69.952] __alloc_skb+0xfc/0x2b0 [69.952] __mt76_mcu_msg_alloc+0xbf/0x230 [mt76] [69.952] mt76_mcu_send_and_get_msg+0xab/0x110 [mt76] [69.952] __mt76_mcu_send_firmware.cold+0x94/0x15d [mt76] [69.952] mt76_connac_mcu_send_ram_firmware+0x415/0x54d [mt76_connac_lib] [69.952] mt76_connac2_load_ram.cold+0x118/0x4bc [mt76_connac_lib] [69.952] mt7921_run_firmware.cold+0x2e9/0x405 [mt7921_common] [69.952] mt7921s_mcu_init+0x45/0x80 [mt7921s] [69.953] mt7921_init_work+0xe1/0x2a0 [mt7921_common] [69.953] process_one_work+0x7ee/0x1320 [69.953] worker_thread+0x53c/0x1240 [69.953] kthread+0x2b8/0x370 [69.953] ret_from_fork+0x1f/0x30 [69.953] The buggy address belongs to the object at ffff88811c9ce800 which belongs to the cache kmalloc-2k of size 2048 [69.953] The buggy address is located 0 bytes to the right of 2048-byte region [ffff88811c9ce800, ffff88811c9cf000) [69.953] Memory state around the buggy address: [69.953] ffff88811c9cef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [69.953] ffff88811c9cef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [69.953] >ffff88811c9cf000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69.953] ^ [69.953] ffff88811c9cf080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69.953] ffff88811c9cf100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | ||||
| CVE-2022-50705 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: defer fsnotify calls to task context We can't call these off the kiocb completion as that might be off soft/hard irq context. Defer the calls to when we process the task_work for this request. That avoids valid complaints like: stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.0.0-rc6-syzkaller-00321-g105a36f3694e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_usage_bug kernel/locking/lockdep.c:3961 [inline] valid_state kernel/locking/lockdep.c:3973 [inline] mark_lock_irq kernel/locking/lockdep.c:4176 [inline] mark_lock.part.0.cold+0x18/0xd8 kernel/locking/lockdep.c:4632 mark_lock kernel/locking/lockdep.c:4596 [inline] mark_usage kernel/locking/lockdep.c:4527 [inline] __lock_acquire+0x11d9/0x56d0 kernel/locking/lockdep.c:5007 lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 __fs_reclaim_acquire mm/page_alloc.c:4674 [inline] fs_reclaim_acquire+0x115/0x160 mm/page_alloc.c:4688 might_alloc include/linux/sched/mm.h:271 [inline] slab_pre_alloc_hook mm/slab.h:700 [inline] slab_alloc mm/slab.c:3278 [inline] __kmem_cache_alloc_lru mm/slab.c:3471 [inline] kmem_cache_alloc+0x39/0x520 mm/slab.c:3491 fanotify_alloc_fid_event fs/notify/fanotify/fanotify.c:580 [inline] fanotify_alloc_event fs/notify/fanotify/fanotify.c:813 [inline] fanotify_handle_event+0x1130/0x3f40 fs/notify/fanotify/fanotify.c:948 send_to_group fs/notify/fsnotify.c:360 [inline] fsnotify+0xafb/0x1680 fs/notify/fsnotify.c:570 __fsnotify_parent+0x62f/0xa60 fs/notify/fsnotify.c:230 fsnotify_parent include/linux/fsnotify.h:77 [inline] fsnotify_file include/linux/fsnotify.h:99 [inline] fsnotify_access include/linux/fsnotify.h:309 [inline] __io_complete_rw_common+0x485/0x720 io_uring/rw.c:195 io_complete_rw+0x1a/0x1f0 io_uring/rw.c:228 iomap_dio_complete_work fs/iomap/direct-io.c:144 [inline] iomap_dio_bio_end_io+0x438/0x5e0 fs/iomap/direct-io.c:178 bio_endio+0x5f9/0x780 block/bio.c:1564 req_bio_endio block/blk-mq.c:695 [inline] blk_update_request+0x3fc/0x1300 block/blk-mq.c:825 scsi_end_request+0x7a/0x9a0 drivers/scsi/scsi_lib.c:541 scsi_io_completion+0x173/0x1f70 drivers/scsi/scsi_lib.c:971 scsi_complete+0x122/0x3b0 drivers/scsi/scsi_lib.c:1438 blk_complete_reqs+0xad/0xe0 block/blk-mq.c:1022 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 common_interrupt+0xa9/0xc0 arch/x86/kernel/irq.c:240 | ||||
| CVE-2022-50698 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: da7219: Fix an error handling path in da7219_register_dai_clks() If clk_hw_register() fails, the corresponding clk should not be unregistered. To handle errors from loops, clean up partial iterations before doing the goto. So add a clk_hw_unregister(). Then use a while (--i >= 0) loop in the unwind section. | ||||
| CVE-2022-50702 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init() Inject fault while probing module, if device_register() fails in vdpasim_net_init() or vdpasim_blk_init(), but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). (vdpa_sim_net) unreferenced object 0xffff88807eebc370 (size 16): comm "modprobe", pid 3848, jiffies 4362982860 (age 18.153s) hex dump (first 16 bytes): 76 64 70 61 73 69 6d 5f 6e 65 74 00 6b 6b 6b a5 vdpasim_net.kkk. backtrace: [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150 [<ffffffff81731d53>] kstrdup+0x33/0x60 [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110 [<ffffffff82d87aab>] dev_set_name+0xab/0xe0 [<ffffffff82d91a23>] device_add+0xe3/0x1a80 [<ffffffffa0270013>] 0xffffffffa0270013 [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0 [<ffffffff813739cb>] do_init_module+0x1ab/0x640 [<ffffffff81379d20>] load_module+0x5d00/0x77f0 [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0 [<ffffffff83c4d505>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 (vdpa_sim_blk) unreferenced object 0xffff8881070c1250 (size 16): comm "modprobe", pid 6844, jiffies 4364069319 (age 17.572s) hex dump (first 16 bytes): 76 64 70 61 73 69 6d 5f 62 6c 6b 00 6b 6b 6b a5 vdpasim_blk.kkk. backtrace: [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150 [<ffffffff81731d53>] kstrdup+0x33/0x60 [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110 [<ffffffff82d87aab>] dev_set_name+0xab/0xe0 [<ffffffff82d91a23>] device_add+0xe3/0x1a80 [<ffffffffa0220013>] 0xffffffffa0220013 [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0 [<ffffffff813739cb>] do_init_module+0x1ab/0x640 [<ffffffff81379d20>] load_module+0x5d00/0x77f0 [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0 [<ffffffff83c4d505>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2022-50711 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe() If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called in error path or removing module to free the memory allocated in mtk_wed_add_hw(). | ||||
| CVE-2022-50706 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/ieee802154: don't warn zero-sized raw_sendmsg() syzbot is hitting skb_assert_len() warning at __dev_queue_xmit() [1], for PF_IEEE802154 socket's zero-sized raw_sendmsg() request is hitting __dev_queue_xmit() with skb->len == 0. Since PF_IEEE802154 socket's zero-sized raw_sendmsg() request was able to return 0, don't call __dev_queue_xmit() if packet length is 0. ---------- #include <sys/socket.h> #include <netinet/in.h> int main(int argc, char *argv[]) { struct sockaddr_in addr = { .sin_family = AF_INET, .sin_addr.s_addr = htonl(INADDR_LOOPBACK) }; struct iovec iov = { }; struct msghdr hdr = { .msg_name = &addr, .msg_namelen = sizeof(addr), .msg_iov = &iov, .msg_iovlen = 1 }; sendmsg(socket(PF_IEEE802154, SOCK_RAW, 0), &hdr, 0); return 0; } ---------- Note that this might be a sign that commit fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len") should be reverted, for skb->len == 0 was acceptable for at least PF_IEEE802154 socket. | ||||
| CVE-2022-50707 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session() 'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(), and should be freed in the invalid ctrl_status->status error handling case. Otherwise there is a memory leak. | ||||
| CVE-2022-50745 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: tegra-video: fix device_node use after free At probe time this code path is followed: * tegra_csi_init * tegra_csi_channels_alloc * for_each_child_of_node(node, channel) -- iterates over channels * automatically gets 'channel' * tegra_csi_channel_alloc() * saves into chan->of_node a pointer to the channel OF node * automatically gets and puts 'channel' * now the node saved in chan->of_node has refcount 0, can disappear * tegra_csi_channels_init * iterates over channels * tegra_csi_channel_init -- uses chan->of_node After that, chan->of_node keeps storing the node until the device is removed. of_node_get() the node and of_node_put() it during teardown to avoid any risk. | ||||