Export limit exceeded: 347719 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (347719 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43039 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg-prueth: fix missing data copy and wrong recycle in ZC RX dispatch emac_dispatch_skb_zc() allocates a new skb via napi_alloc_skb() but never copies the packet data from the XDP buffer into it. The skb is passed up the stack containing uninitialized heap memory instead of the actual received packet, leaking kernel heap contents to userspace. Copy the received packet data from the XDP buffer into the skb using skb_copy_to_linear_data(). Additionally, remove the skb_mark_for_recycle() call since the skb is backed by the NAPI page frag allocator, not page_pool. Marking a non-page_pool skb for recycle causes the free path to return pages to a page_pool that does not own them, corrupting page_pool state. The non-ZC path (emac_rx_packet) does not have these issues because it uses napi_build_skb() to wrap the existing page_pool page directly, requiring no copy, and correctly marks for recycle since the page comes from page_pool_dev_alloc_pages(). | ||||
| CVE-2026-43038 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway. | ||||
| CVE-2026-43036 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 | ||||
| CVE-2026-43033 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks, | ||||
| CVE-2026-43029 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lockup in mptcp_recvmsg() syzbot reported a soft lockup in mptcp_recvmsg() [0]. When receiving data with MSG_PEEK | MSG_WAITALL flags, the skb is not removed from the sk_receive_queue. This causes sk_wait_data() to always find available data and never perform actual waiting, leading to a soft lockup. Fix this by adding a 'last' parameter to track the last peeked skb. This allows sk_wait_data() to make informed waiting decisions and prevent infinite loops when MSG_PEEK is used. [0]: watchdog: BUG: soft lockup - CPU#2 stuck for 156s! [server:1963] Modules linked in: CPU: 2 UID: 0 PID: 1963 Comm: server Not tainted 6.19.0-rc8 #61 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:sk_wait_data+0x15/0x190 Code: 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 41 56 41 55 41 54 49 89 f4 55 48 89 d5 53 48 89 fb <48> 83 ec 30 65 48 8b 05 17 a4 6b 01 48 89 44 24 28 31 c0 65 48 8b RSP: 0018:ffffc90000603ca0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888102bf0800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000603d18 RDI: ffff888102bf0800 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000101 R10: 0000000000000000 R11: 0000000000000075 R12: ffffc90000603d18 R13: ffff888102bf0800 R14: ffff888102bf0800 R15: 0000000000000000 FS: 00007f6e38b8c4c0(0000) GS:ffff8881b877e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa7bff1680 CR3: 0000000105cbe000 CR4: 00000000000006f0 Call Trace: <TASK> mptcp_recvmsg+0x547/0x8c0 net/mptcp/protocol.c:2329 inet_recvmsg+0x11f/0x130 net/ipv4/af_inet.c:891 sock_recvmsg+0x94/0xc0 net/socket.c:1100 __sys_recvfrom+0xb2/0x130 net/socket.c:2256 __x64_sys_recvfrom+0x1f/0x30 net/socket.c:2267 do_syscall_64+0x59/0x2d0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:131 RIP: 0033:0x7f6e386a4a1d Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8d 05 f1 de 2c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2d 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41 RSP: 002b:00007ffc3c4bb078 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 000000000000861e RCX: 00007f6e386a4a1d RDX: 00000000000003ff RSI: 00007ffc3c4bb150 RDI: 0000000000000004 RBP: 00007ffc3c4bb570 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000103 R11: 0000000000000246 R12: 00005605dbc00be0 R13: 00007ffc3c4bb650 R14: 0000000000000000 R15: 0000000000000000 </TASK> | ||||
| CVE-2026-43028 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change. | ||||
| CVE-2026-43026 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_proto and dir in the else branch, guarded by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when NAT is enabled. Confirmed by priming the expect slab with NAT-bearing expectations, freeing them, creating a new expectation without CTA_EXPECT_NAT, and observing that the ctnetlink dump emits a spurious CTA_EXPECT_NAT containing stale data from the prior allocation. | ||||
| CVE-2026-43024 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue. | ||||
| CVE-2026-43023 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: fix race conditions in sco_sock_connect() sco_sock_connect() checks sk_state and sk_type without holding the socket lock. Two concurrent connect() syscalls on the same socket can both pass the check and enter sco_connect(), leading to use-after-free. The buggy scenario involves three participants and was confirmed with additional logging instrumentation: Thread A (connect): HCI disconnect: Thread B (connect): sco_sock_connect(sk) sco_sock_connect(sk) sk_state==BT_OPEN sk_state==BT_OPEN (pass, no lock) (pass, no lock) sco_connect(sk): sco_connect(sk): hci_dev_lock hci_dev_lock hci_connect_sco <- blocked -> hcon1 sco_conn_add->conn1 lock_sock(sk) sco_chan_add: conn1->sk = sk sk->conn = conn1 sk_state=BT_CONNECT release_sock hci_dev_unlock hci_dev_lock sco_conn_del: lock_sock(sk) sco_chan_del: sk->conn=NULL conn1->sk=NULL sk_state= BT_CLOSED SOCK_ZAPPED release_sock hci_dev_unlock (unblocked) hci_connect_sco -> hcon2 sco_conn_add -> conn2 lock_sock(sk) sco_chan_add: sk->conn=conn2 sk_state= BT_CONNECT // zombie sk! release_sock hci_dev_unlock Thread B revives a BT_CLOSED + SOCK_ZAPPED socket back to BT_CONNECT. Subsequent cleanup triggers double sock_put() and use-after-free. Meanwhile conn1 is leaked as it was orphaned when sco_conn_del() cleared the association. Fix this by: - Moving lock_sock() before the sk_state/sk_type checks in sco_sock_connect() to serialize concurrent connect attempts - Fixing the sk_type != SOCK_SEQPACKET check to actually return the error instead of just assigning it - Adding a state re-check in sco_connect() after lock_sock() to catch state changes during the window between the locks - Adding sco_pi(sk)->conn check in sco_chan_add() to prevent double-attach of a socket to multiple connections - Adding hci_conn_drop() on sco_chan_add failure to prevent HCI connection leaks | ||||
| CVE-2026-43017 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate mesh send advertising payload length mesh_send() currently bounds MGMT_OP_MESH_SEND by total command length, but it never verifies that the bytes supplied for the flexible adv_data[] array actually match the embedded adv_data_len field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a truncated command can still pass the existing 20..50 byte range check and later drive the async mesh send path past the end of the queued command buffer. Keep rejecting zero-length and oversized advertising payloads, but validate adv_data_len explicitly and require the command length to exactly match the flexible array size before queueing the request. | ||||
| CVE-2026-43016 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready(). syzbot reported use-after-free of AF_UNIX socket's sk->sk_socket in sk_psock_verdict_data_ready(). [0] In unix_stream_sendmsg(), the peer socket's ->sk_data_ready() is called after dropping its unix_state_lock(). Although the sender socket holds the peer's refcount, it does not prevent the peer's sock_orphan(), and the peer's sk_socket might be freed after one RCU grace period. Let's fetch the peer's sk->sk_socket and sk->sk_socket->ops under RCU in sk_psock_verdict_data_ready(). [0]: BUG: KASAN: slab-use-after-free in sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278 Read of size 8 at addr ffff8880594da860 by task syz.4.1842/11013 CPU: 1 UID: 0 PID: 11013 Comm: syz.4.1842 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xba/0x230 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278 unix_stream_sendmsg+0x8a3/0xe80 net/unix/af_unix.c:2482 sock_sendmsg_nosec net/socket.c:721 [inline] __sock_sendmsg net/socket.c:736 [inline] ____sys_sendmsg+0x972/0x9f0 net/socket.c:2585 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2639 __sys_sendmsg net/socket.c:2671 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2674 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7facf899c819 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007facf9827028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007facf8c15fa0 RCX: 00007facf899c819 RDX: 0000000000000000 RSI: 0000200000000500 RDI: 0000000000000004 RBP: 00007facf8a32c91 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007facf8c16038 R14: 00007facf8c15fa0 R15: 00007ffd41b01c78 </TASK> Allocated by task 11013: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 unpoison_slab_object mm/kasan/common.c:340 [inline] __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4538 [inline] slab_alloc_node mm/slub.c:4866 [inline] kmem_cache_alloc_lru_noprof+0x2b8/0x640 mm/slub.c:4885 sock_alloc_inode+0x28/0xc0 net/socket.c:316 alloc_inode+0x6a/0x1b0 fs/inode.c:347 new_inode_pseudo include/linux/fs.h:3003 [inline] sock_alloc net/socket.c:631 [inline] __sock_create+0x12d/0x9d0 net/socket.c:1562 sock_create net/socket.c:1656 [inline] __sys_socketpair+0x1c4/0x560 net/socket.c:1803 __do_sys_socketpair net/socket.c:1856 [inline] __se_sys_socketpair net/socket.c:1853 [inline] __x64_sys_socketpair+0x9b/0xb0 net/socket.c:1853 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 15: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 [inline] __kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:2685 [inline] slab_free mm/slub.c:6165 [inline] kmem_cache_free+0x187/0x630 mm/slub.c:6295 rcu_do_batch kernel/rcu/tree.c: ---truncated--- | ||||
| CVE-2026-43015 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix clk handling on PCI glue driver removal platform_device_unregister() may still want to use the registered clks during runtime resume callback. Note that there is a commit d82d5303c4c5 ("net: macb: fix use after free on rmmod") that addressed the similar problem of clk vs platform device unregistration but just moved the bug to another place. Save the pointers to clks into local variables for reuse after platform device is unregistered. BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60 Read of size 8 at addr ffff888104f85e00 by task modprobe/597 CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8d/0xba print_report+0x17f/0x496 kasan_report+0xd9/0x180 clk_prepare+0x5a/0x60 macb_runtime_resume+0x13d/0x410 [macb] pm_generic_runtime_resume+0x97/0xd0 __rpm_callback+0xc8/0x4d0 rpm_callback+0xf6/0x230 rpm_resume+0xeeb/0x1a70 __pm_runtime_resume+0xb4/0x170 bus_remove_device+0x2e3/0x4b0 device_del+0x5b3/0xdc0 platform_device_del+0x4e/0x280 platform_device_unregister+0x11/0x50 pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 </TASK> Allocated by task 519: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8e/0x90 __clk_register+0x458/0x2890 clk_hw_register+0x1a/0x60 __clk_hw_register_fixed_rate+0x255/0x410 clk_register_fixed_rate+0x3c/0xa0 macb_probe+0x1d8/0x42e [macb_pci] local_pci_probe+0xd7/0x190 pci_device_probe+0x252/0x600 really_probe+0x255/0x7f0 __driver_probe_device+0x1ee/0x330 driver_probe_device+0x4c/0x1f0 __driver_attach+0x1df/0x4e0 bus_for_each_dev+0x15d/0x1f0 bus_add_driver+0x486/0x5e0 driver_register+0x23a/0x3d0 do_one_initcall+0xfd/0x4d0 do_init_module+0x18b/0x5a0 load_module+0x5663/0x7950 __do_sys_finit_module+0x101/0x180 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 597: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x106/0x180 __kmem_cache_free+0xbc/0x320 clk_unregister+0x6de/0x8d0 macb_remove+0x73/0xc0 [macb_pci] pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 | ||||
| CVE-2026-43014 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: properly unregister fixed rate clocks The additional resources allocated with clk_register_fixed_rate() need to be released with clk_unregister_fixed_rate(), otherwise they are lost. | ||||
| CVE-2026-43013 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: lag: Check for LAG device before creating debugfs __mlx5_lag_dev_add_mdev() may return 0 (success) even when an error occurs that is handled gracefully. Consequently, the initialization flow proceeds to call mlx5_ldev_add_debugfs() even when there is no valid LAG context. mlx5_ldev_add_debugfs() blindly created the debugfs directory and attributes. This exposed interfaces (like the members file) that rely on a valid ldev pointer, leading to potential NULL pointer dereferences if accessed when ldev is NULL. Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer before attempting to create the debugfs entries. | ||||
| CVE-2026-43012 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix switchdev mode rollback in case of failure If for some internal reason switchdev mode fails, we rollback to legacy mode, before this patch, rollback will unregister the uplink netdev and leave it unregistered causing the below kernel bug. To fix this, we need to avoid netdev unregister by setting the proper rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode. devlink (431) used greatest stack depth: 11048 bytes left mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \ necvfs(0), active vports(0) mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535 mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \ QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \ status bad parameter(0x3), syndrome (0x3a3846), err(-22) mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \ representor for vport 65535 ------------[ cut here ]------------ kernel BUG at net/core/dev.c:12070! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \ #9 PREEMPT(voluntary) RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0 ... Call Trace: [ 90.923094] unregister_netdevice_queue+0xad/0xf0 [ 90.923323] unregister_netdev+0x1c/0x40 [ 90.923522] mlx5e_vport_rep_unload+0x61/0xc6 [ 90.923736] esw_offloads_enable+0x8e6/0x920 [ 90.923947] mlx5_eswitch_enable_locked+0x349/0x430 [ 90.924182] ? is_mp_supported+0x57/0xb0 [ 90.924376] mlx5_devlink_eswitch_mode_set+0x167/0x350 [ 90.924628] devlink_nl_eswitch_set_doit+0x6f/0xf0 [ 90.924862] genl_family_rcv_msg_doit+0xe8/0x140 [ 90.925088] genl_rcv_msg+0x18b/0x290 [ 90.925269] ? __pfx_devlink_nl_pre_doit+0x10/0x10 [ 90.925506] ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10 [ 90.925766] ? __pfx_devlink_nl_post_doit+0x10/0x10 [ 90.926001] ? __pfx_genl_rcv_msg+0x10/0x10 [ 90.926206] netlink_rcv_skb+0x52/0x100 [ 90.926393] genl_rcv+0x28/0x40 [ 90.926557] netlink_unicast+0x27d/0x3d0 [ 90.926749] netlink_sendmsg+0x1f7/0x430 [ 90.926942] __sys_sendto+0x213/0x220 [ 90.927127] ? __sys_recvmsg+0x6a/0xd0 [ 90.927312] __x64_sys_sendto+0x24/0x30 [ 90.927504] do_syscall_64+0x50/0x1c0 [ 90.927687] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 90.927929] RIP: 0033:0x7f7d0363e047 | ||||
| CVE-2026-43011 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix potential double free of skb When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at line 48 and returns 1 (error). This error propagates back through the call chain: x25_queue_rx_frame returns 1 | v x25_state3_machine receives the return value 1 and takes the else branch at line 278, setting queued=0 and returning 0 | v x25_process_rx_frame returns queued=0 | v x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb) again This would free the same skb twice. Looking at x25_backlog_rcv: net/x25/x25_in.c:x25_backlog_rcv() { ... queued = x25_process_rx_frame(sk, skb); ... if (!queued) kfree_skb(skb); } | ||||
| CVE-2026-43008 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: qixis-fpga: Fix error handling for devm_regmap_init_mmio() devm_regmap_init_mmio() returns an ERR_PTR() on failure, not NULL. The original code checked for NULL which would never trigger on error, potentially leading to an invalid pointer dereference. Use IS_ERR() and PTR_ERR() to properly handle the error case. | ||||
| CVE-2026-43006 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: reject zero-length fixed buffer import validate_fixed_range() admits buf_addr at the exact end of the registered region when len is zero, because the check uses strict greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed() then computes offset == imu->len, which causes the bvec skip logic to advance past the last bio_vec entry and read bv_offset from out-of-bounds slab memory. Return early from io_import_fixed() when len is zero. A zero-length import has no data to transfer and should not walk the bvec array at all. BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0 Read of size 4 at addr ffff888002bcc254 by task poc/103 Call Trace: io_import_reg_buf+0x697/0x7f0 io_write_fixed+0xd9/0x250 __io_issue_sqe+0xad/0x710 io_issue_sqe+0x7d/0x1100 io_submit_sqes+0x86a/0x23c0 __do_sys_io_uring_enter+0xa98/0x1590 Allocated by task 103: The buggy address is located 12 bytes to the right of allocated 584-byte region [ffff888002bcc000, ffff888002bcc248) | ||||
| CVE-2026-43005 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (tps53679) Fix array access with zero-length block read i2c_smbus_read_block_data() can return 0, indicating a zero-length read. When this happens, tps53679_identify_chip() accesses buf[ret - 1] which is buf[-1], reading one byte before the buffer on the stack. Fix by changing the check from "ret < 0" to "ret <= 0", treating a zero-length read as an error (-EIO), which prevents the out-of-bounds array access. Also fix a typo in the adjacent comment: "if present" instead of duplicate "if". | ||||
| CVE-2026-43004 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: stm32-ospi: Fix resource leak in remove() callback The remove() callback returned early if pm_runtime_resume_and_get() failed, skipping the cleanup of spi controller and other resources. Remove the early return so cleanup completes regardless of PM resume result. | ||||