Export limit exceeded: 17886 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17886 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-2785 | 1 Linux | 1 Linux Kernel | 2026-04-14 | 6.7 Medium |
| There exists an arbitrary memory read within the Linux Kernel BPF - Constants provided to fill pointers in structs passed in to bpf_sys_bpf are not verified and can point anywhere, including memory not owned by BPF. An attacker with CAP_BPF can arbitrarily read memory from anywhere on the system. We recommend upgrading past commit 86f44fcec22c | ||||
| CVE-2020-26147 | 5 Arista, Debian, Linux and 2 more | 15 C-65, C-65 Firmware, C-75 and 12 more | 2026-04-14 | 5.4 Medium |
| An issue was discovered in the Linux kernel 5.8.9. The WEP, WPA, WPA2, and WPA3 implementations reassemble fragments even though some of them were sent in plaintext. This vulnerability can be abused to inject packets and/or exfiltrate selected fragments when another device sends fragmented frames and the WEP, CCMP, or GCMP data-confidentiality protocol is used. | ||||
| CVE-2020-24588 | 9 Arista, Cisco, Debian and 6 more | 351 C-100, C-100 Firmware, C-110 and 348 more | 2026-04-14 | 3.5 Low |
| The 802.11 standard that underpins Wi-Fi Protected Access (WPA, WPA2, and WPA3) and Wired Equivalent Privacy (WEP) doesn't require that the A-MSDU flag in the plaintext QoS header field is authenticated. Against devices that support receiving non-SSP A-MSDU frames (which is mandatory as part of 802.11n), an adversary can abuse this to inject arbitrary network packets. | ||||
| CVE-2026-31412 | 1 Linux | 1 Linux Kernel | 2026-04-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks() The `check_command_size_in_blocks()` function calculates the data size in bytes by left shifting `common->data_size_from_cmnd` by the block size (`common->curlun->blkbits`). However, it does not validate whether this shift operation will cause an integer overflow. Initially, the block size is set up in `fsg_lun_open()` , and the `common->data_size_from_cmnd` is set up in `do_scsi_command()`. During initialization, there is no integer overflow check for the interaction between two variables. So if a malicious USB host sends a SCSI READ or WRITE command requesting a large amount of data (`common->data_size_from_cmnd`), the left shift operation can wrap around. This results in a truncated data size, which can bypass boundary checks and potentially lead to memory corruption or out-of-bounds accesses. Fix this by using the check_shl_overflow() macro to safely perform the shift and catch any overflows. | ||||
| CVE-2026-23471 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 7.0 High |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-23333 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-31411 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: atm: fix crash due to unvalidated vcc pointer in sigd_send() Reproducer available at [1]. The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc pointer from msg->vcc and uses it directly without any validation. This pointer comes from userspace via sendmsg() and can be arbitrarily forged: int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0); ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon struct msghdr msg = { .msg_iov = &iov, ... }; *(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef In normal operation, the kernel sends the vcc pointer to the signaling daemon via sigd_enq() when processing operations like connect(), bind(), or listen(). The daemon is expected to return the same pointer when responding. However, a malicious daemon can send arbitrary pointer values. Fix this by introducing find_get_vcc() which validates the pointer by searching through vcc_hash (similar to how sigd_close() iterates over all VCCs), and acquires a reference via sock_hold() if found. Since struct atm_vcc embeds struct sock as its first member, they share the same lifetime. Therefore using sock_hold/sock_put is sufficient to keep the vcc alive while it is being used. Note that there may be a race with sigd_close() which could mark the vcc with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns. However, sock_hold() guarantees the memory remains valid, so this race only affects the logical state, not memory safety. [1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3 | ||||
| CVE-2026-31410 | 1 Linux | 1 Linux Kernel | 2026-04-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION Use sb->s_uuid for a proper volume identifier as the primary choice. For filesystems that do not provide a UUID, fall back to stfs.f_fsid obtained from vfs_statfs(). | ||||
| CVE-2026-31395 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix OOB access in DBG_BUF_PRODUCER async event handler The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in bnxt_async_event_process() uses a firmware-supplied 'type' field directly as an index into bp->bs_trace[] without bounds validation. The 'type' field is a 16-bit value extracted from DMA-mapped completion ring memory that the NIC writes directly to host RAM. A malicious or compromised NIC can supply any value from 0 to 65535, causing an out-of-bounds access into kernel heap memory. The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte and writes to bs_trace->last_offset and bs_trace->wrapped, leading to kernel memory corruption or a crash. Fix by adding a bounds check and defining BNXT_TRACE_MAX as DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently defined firmware trace types (0x0 through 0xc). | ||||
| CVE-2026-31394 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations ieee80211_chan_bw_change() iterates all stations and accesses link->reserved.oper via sta->sdata->link[link_id]. For stations on AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to the VLAN sdata, whose link never participates in chanctx reservations. This leaves link->reserved.oper zero-initialized with chan == NULL, causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw() when accessing chandef->chan->band during CSA. Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata() before accessing link data. [also change sta->sdata in ARRAY_SIZE even if it doesn't matter] | ||||
| CVE-2026-31390 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix memory leak in xe_vm_madvise_ioctl When check_bo_args_are_sane() validation fails, jump to the new free_vmas cleanup label to properly free the allocated resources. This ensures proper cleanup in this error path. (cherry picked from commit 29bd06faf727a4b76663e4be0f7d770e2d2a7965) | ||||
| CVE-2026-23475 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: fix statistics allocation The controller per-cpu statistics is not allocated until after the controller has been registered with driver core, which leaves a window where accessing the sysfs attributes can trigger a NULL-pointer dereference. Fix this by moving the statistics allocation to controller allocation while tying its lifetime to that of the controller (rather than using implicit devres). | ||||
| CVE-2026-23473 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: fix multishot recv missing EOF on wakeup race When a socket send and shutdown() happen back-to-back, both fire wake-ups before the receiver's task_work has a chance to run. The first wake gets poll ownership (poll_refs=1), and the second bumps it to 2. When io_poll_check_events() runs, it calls io_poll_issue() which does a recv that reads the data and returns IOU_RETRY. The loop then drains all accumulated refs (atomic_sub_return(2) -> 0) and exits, even though only the first event was consumed. Since the shutdown is a persistent state change, no further wakeups will happen, and the multishot recv can hang forever. Check specifically for HUP in the poll loop, and ensure that another loop is done to check for status if more than a single poll activation is pending. This ensures we don't lose the shutdown event. | ||||
| CVE-2026-23472 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN uart_write_room() and uart_write() behave inconsistently when xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were never properly initialized): - uart_write_room() returns kfifo_avail() which can be > 0 - uart_write() checks xmit_buf and returns 0 if NULL This inconsistency causes an infinite loop in drivers that rely on tty_write_room() to determine if they can write: while (tty_write_room(tty) > 0) { written = tty->ops->write(...); // written is always 0, loop never exits } For example, caif_serial's handle_tx() enters an infinite loop when used with PORT_UNKNOWN serial ports, causing system hangs. Fix by making uart_write_room() also check xmit_buf and return 0 if it's NULL, consistent with uart_write(). Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 | ||||
| CVE-2026-23470 | 1 Linux | 1 Linux Kernel | 2026-04-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix deadlock in soft reset sequence The soft reset sequence is currently executed from the threaded IRQ handler, hence it cannot call disable_irq() which internally waits for IRQ handlers, i.e. itself, to complete. Use disable_irq_nosync() during a soft reset instead. | ||||
| CVE-2026-23469 | 1 Linux | 1 Linux Kernel | 2026-04-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Synchronize interrupts before suspending the GPU The runtime PM suspend callback doesn't know whether the IRQ handler is in progress on a different CPU core and doesn't wait for it to finish. Depending on timing, the IRQ handler could be running while the GPU is suspended, leading to kernel crashes when trying to access GPU registers. See example signature below. In a power off sequence initiated by the runtime PM suspend callback, wait for any IRQ handlers in progress on other CPU cores to finish, by calling synchronize_irq(). At the same time, remove the runtime PM resume/put calls in the threaded IRQ handler. On top of not being the right approach to begin with, and being at the wrong place as they should have wrapped all GPU register accesses, the driver would hit a deadlock between synchronize_irq() being called from a runtime PM suspend callback, holding the device power lock, and the resume callback requiring the same. Example crash signature on a TI AM68 SK platform: [ 337.241218] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError [ 337.241239] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT [ 337.241246] Tainted: [M]=MACHINE_CHECK [ 337.241249] Hardware name: Texas Instruments AM68 SK (DT) [ 337.241252] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 337.241256] pc : pvr_riscv_irq_pending+0xc/0x24 [ 337.241277] lr : pvr_device_irq_thread_handler+0x64/0x310 [ 337.241282] sp : ffff800085b0bd30 [ 337.241284] x29: ffff800085b0bd50 x28: ffff0008070d9eab x27: ffff800083a5ce10 [ 337.241291] x26: ffff000806e48f80 x25: ffff0008070d9eac x24: 0000000000000000 [ 337.241296] x23: ffff0008068e9bf0 x22: ffff0008068e9bd0 x21: ffff800085b0bd30 [ 337.241301] x20: ffff0008070d9e00 x19: ffff0008068e9000 x18: 0000000000000001 [ 337.241305] x17: 637365645f656c70 x16: 0000000000000000 x15: ffff000b7df9ff40 [ 337.241310] x14: 0000a585fe3c0d0e x13: 000000999704f060 x12: 000000000002771a [ 337.241314] x11: 00000000000000c0 x10: 0000000000000af0 x9 : ffff800085b0bd00 [ 337.241318] x8 : ffff0008071175d0 x7 : 000000000000b955 x6 : 0000000000000003 [ 337.241323] x5 : 0000000000000000 x4 : 0000000000000002 x3 : 0000000000000000 [ 337.241327] x2 : ffff800080e39d20 x1 : ffff800080e3fc48 x0 : 0000000000000000 [ 337.241333] Kernel panic - not syncing: Asynchronous SError Interrupt [ 337.241337] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT [ 337.241342] Tainted: [M]=MACHINE_CHECK [ 337.241343] Hardware name: Texas Instruments AM68 SK (DT) [ 337.241345] Call trace: [ 337.241348] show_stack+0x18/0x24 (C) [ 337.241357] dump_stack_lvl+0x60/0x80 [ 337.241364] dump_stack+0x18/0x24 [ 337.241368] vpanic+0x124/0x2ec [ 337.241373] abort+0x0/0x4 [ 337.241377] add_taint+0x0/0xbc [ 337.241384] arm64_serror_panic+0x70/0x80 [ 337.241389] do_serror+0x3c/0x74 [ 337.241392] el1h_64_error_handler+0x30/0x48 [ 337.241400] el1h_64_error+0x6c/0x70 [ 337.241404] pvr_riscv_irq_pending+0xc/0x24 (P) [ 337.241410] irq_thread_fn+0x2c/0xb0 [ 337.241416] irq_thread+0x170/0x334 [ 337.241421] kthread+0x12c/0x210 [ 337.241428] ret_from_fork+0x10/0x20 [ 337.241434] SMP: stopping secondary CPUs [ 337.241451] Kernel Offset: disabled [ 337.241453] CPU features: 0x040000,02002800,20002001,0400421b [ 337.241456] Memory Limit: none [ 337.457921] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- | ||||
| CVE-2026-23468 | 1 Linux | 1 Linux Kernel | 2026-04-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Limit BO list entry count to prevent resource exhaustion Userspace can pass an arbitrary number of BO list entries via the bo_number field. Although the previous multiplication overflow check prevents out-of-bounds allocation, a large number of entries could still cause excessive memory allocation (up to potentially gigabytes) and unnecessarily long list processing times. Introduce a hard limit of 128k entries per BO list, which is more than sufficient for any realistic use case (e.g., a single list containing all buffers in a large scene). This prevents memory exhaustion attacks and ensures predictable performance. Return -EINVAL if the requested entry count exceeds the limit (cherry picked from commit 688b87d39e0aa8135105b40dc167d74b5ada5332) | ||||
| CVE-2026-23467 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Fix an unlikely NULL pointer deference at probe intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been initialized, and dmc is thus NULL. That would be the case when the call path is intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() -> gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as intel_power_domains_init_hw() is called *before* intel_dmc_init(). However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count() conditionally, depending on the current and target DC states. At probe, the target is disabled, but if DC6 is enabled, the function is called, and an oops follows. Apparently it's quite unlikely that DC6 is enabled at probe, as we haven't seen this failure mode before. It is also strange to have DC6 enabled at boot, since that would require the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and the driver stopping / reprogramming the firmware is a poorly specified sequence and as such unlikely an intentional BIOS behaviour. It's more likely that BIOS is leaving an unintentionally enabled DC6 HW state behind (without actually loading the required DMC firmware for this). The tracking of the DC6 allowed counter only works if starting / stopping the counter depends on the _SW_ DC6 state vs. the current _HW_ DC6 state (since stopping the counter requires the DC5 counter captured when the counter was started). Thus, using the HW DC6 state is incorrect and it also leads to the above oops. Fix both issues by using the SW DC6 state for the tracking. This is v2 of the fix originally sent by Jani, updated based on the first Link: discussion below. (cherry picked from commit 2344b93af8eb5da5d496b4e0529d35f0f559eaf0) | ||||
| CVE-2026-23465 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: log new dentries when logging parent dir of a conflicting inode If we log the parent directory of a conflicting inode, we are not logging the new dentries of the directory, so when we finish we have the parent directory's inode marked as logged but we did not log its new dentries. As a consequence if the parent directory is explicitly fsynced later and it does not have any new changes since we logged it, the fsync is a no-op and after a power failure the new dentries are missing. Example scenario: $ mkdir foo $ sync $rmdir foo $ mkdir dir1 $ mkdir dir2 # A file with the same name and parent as the directory we just deleted # and was persisted in a past transaction. So the deleted directory's # inode is a conflicting inode of this new file's inode. $ touch foo $ ln foo dir2/link # The fsync on dir2 will log the parent directory (".") because the # conflicting inode (deleted directory) does not exists anymore, but it # it does not log its new dentries (dir1). $ xfs_io -c "fsync" dir2 # This fsync on the parent directory is no-op, since the previous fsync # logged it (but without logging its new dentries). $ xfs_io -c "fsync" . <power failure> # After log replay dir1 is missing. Fix this by ensuring we log new dir dentries whenever we log the parent directory of a no longer existing conflicting inode. A test case for fstests will follow soon. | ||||
| CVE-2026-23464 | 1 Linux | 1 Linux Kernel | 2026-04-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: microchip: mpfs: Fix memory leak in mpfs_sys_controller_probe() In mpfs_sys_controller_probe(), if of_get_mtd_device_by_node() fails, the function returns immediately without freeing the allocated memory for sys_controller, leading to a memory leak. Fix this by jumping to the out_free label to ensure the memory is properly freed. Also, consolidate the error handling for the mbox_request_channel() failure case to use the same label. | ||||