Export limit exceeded: 344767 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (344767 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54135 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix potential out-of-bounds access in mas_wr_end_piv() Check the write offset end bounds before using it as the offset into the pivot array. This avoids a possible out-of-bounds access on the pivot array if the write extends to the last slot in the node, in which case the node maximum should be used as the end pivot. akpm: this doesn't affect any current callers, but new users of mapletree may encounter this problem if backported into earlier kernels, so let's fix it in -stable kernels in case of this. | ||||
| CVE-2023-54133 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfp: clean mc addresses in application firmware when closing port When moving devices from one namespace to another, mc addresses are cleaned in software while not removed from application firmware. Thus the mc addresses are remained and will cause resource leak. Now use `__dev_mc_unsync` to clean mc addresses when closing port. | ||||
| CVE-2023-54131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: Fix memory leak when handling surveys When removing a rt2x00 device, its associated channel surveys are not freed, causing a memory leak observable with kmemleak: unreferenced object 0xffff9620f0881a00 (size 512): comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s) hex dump (first 32 bytes): 70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD.............. 00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................ backtrace: [<ffffffffb0ed858b>] __kmalloc+0x4b/0x130 [<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib] [<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb] [<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib] [<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb] [<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore] [<ffffffffb13be2d5>] really_probe+0x1a5/0x410 [<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180 [<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90 [<ffffffffb13be972>] __driver_attach+0xd2/0x1c0 [<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0 [<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210 [<ffffffffb13bfc6c>] driver_register+0x5c/0x120 [<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore] [<ffffffffb0c011c4>] do_one_initcall+0x44/0x220 [<ffffffffb0d6134c>] do_init_module+0x4c/0x220 Fix this by freeing the channel surveys on device removal. Tested with a RT3070 based USB wireless adapter. | ||||
| CVE-2023-54130 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling Commit 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") fixed a build warning by turning a comment into a WARN_ON(), but it turns out that syzbot then complains because it can trigger said warning with a corrupted hfs image. The warning actually does warn about a bad situation, but we are much better off just handling it as the error it is. So rather than warn about us doing bad things, stop doing the bad things and return -EIO. While at it, also fix a memory leak that was introduced by an earlier fix for a similar syzbot warning situation, and add a check for one case that historically wasn't handled at all (ie neither comment nor subsequent WARN_ON). | ||||
| CVE-2023-54128 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: drop peer group ids under namespace lock When cleaning up peer group ids in the failure path we need to make sure to hold on to the namespace lock. Otherwise another thread might just turn the mount from a shared into a non-shared mount concurrently. | ||||
| CVE-2023-54123 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix memleak for 'conf->bio_split' In the error path of raid10_run(), 'conf' need be freed, however, 'conf->bio_split' is missed and memory will be leaked. Since there are 3 places to free 'conf', factor out a helper to fix the problem. | ||||
| CVE-2023-54122 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add check for cstate As kzalloc may fail and return NULL pointer, it should be better to check cstate in order to avoid the NULL pointer dereference in __drm_atomic_helper_crtc_reset. Patchwork: https://patchwork.freedesktop.org/patch/514163/ | ||||
| CVE-2023-54121 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix incorrect splitting in btrfs_drop_extent_map_range In production we were seeing a variety of WARN_ON()'s in the extent_map code, specifically in btrfs_drop_extent_map_range() when we have to call add_extent_mapping() for our second split. Consider the following extent map layout PINNED [0 16K) [32K, 48K) and then we call btrfs_drop_extent_map_range for [0, 36K), with skip_pinned == true. The initial loop will have start = 0 end = 36K len = 36K we will find the [0, 16k) extent, but since we are pinned we will skip it, which has this code start = em_end; if (end != (u64)-1) len = start + len - em_end; em_end here is 16K, so now the values are start = 16K len = 16K + 36K - 16K = 36K len should instead be 20K. This is a problem when we find the next extent at [32K, 48K), we need to split this extent to leave [36K, 48k), however the code for the split looks like this split->start = start + len; split->len = em_end - (start + len); In this case we have em_end = 48K split->start = 16K + 36K // this should be 16K + 20K split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K and now we have an invalid extent_map in the tree that potentially overlaps other entries in the extent map. Even in the non-overlapping case we will have split->start set improperly, which will cause problems with any block related calculations. We don't actually need len in this loop, we can simply use end as our end point, and only adjust start up when we find a pinned extent we need to skip. Adjust the logic to do this, which keeps us from inserting an invalid extent map. We only skip_pinned in the relocation case, so this is relatively rare, except in the case where you are running relocation a lot, which can happen with auto relocation on. | ||||
| CVE-2023-54119 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: inotify: Avoid reporting event with invalid wd When inotify_freeing_mark() races with inotify_handle_inode_event() it can happen that inotify_handle_inode_event() sees that i_mark->wd got already reset to -1 and reports this value to userspace which can confuse the inotify listener. Avoid the problem by validating that wd is sensible (and pretend the mark got removed before the event got generated otherwise). | ||||
| CVE-2023-54118 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: setup GPIO controller later in probe The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising. This issue manifests itself as an Oops when the GPIO lines are configured: Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order. | ||||
| CVE-2023-54117 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dcssblk: fix kernel crash with list_add corruption Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. | ||||
| CVE-2023-54114 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment() As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. | ||||
| CVE-2023-54099 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: Protect reconfiguration of sb read-write from racing writes The reconfigure / remount code takes a lot of effort to protect filesystem's reconfiguration code from racing writes on remounting read-only. However during remounting read-only filesystem to read-write mode userspace writes can start immediately once we clear SB_RDONLY flag. This is inconvenient for example for ext4 because we need to do some writes to the filesystem (such as preparation of quota files) before we can take userspace writes so we are clearing SB_RDONLY flag before we are fully ready to accept userpace writes and syzbot has found a way to exploit this [1]. Also as far as I'm reading the code the filesystem remount code was protected from racing writes in the legacy mount path by the mount's MNT_READONLY flag so this is relatively new problem. It is actually fairly easy to protect remount read-write from racing writes using sb->s_readonly_remount flag so let's just do that instead of having to workaround these races in the filesystem code. [1] https://lore.kernel.org/all/00000000000006a0df05f6667499@google.com/T/ | ||||
| CVE-2023-54091 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/client: Fix memory leak in drm_client_target_cloned dmt_mode is allocated and never freed in this function. It was found with the ast driver, but most drivers using generic fbdev setup are probably affected. This fixes the following kmemleak report: backtrace: [<00000000b391296d>] drm_mode_duplicate+0x45/0x220 [drm] [<00000000e45bb5b3>] drm_client_target_cloned.constprop.0+0x27b/0x480 [drm] [<00000000ed2d3a37>] drm_client_modeset_probe+0x6bd/0xf50 [drm] [<0000000010e5cc9d>] __drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper] [<00000000909f82ca>] drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper] [<00000000063a69aa>] drm_client_register+0x169/0x240 [drm] [<00000000a8c61525>] ast_pci_probe+0x142/0x190 [ast] [<00000000987f19bb>] local_pci_probe+0xdc/0x180 [<000000004fca231b>] work_for_cpu_fn+0x4e/0xa0 [<0000000000b85301>] process_one_work+0x8b7/0x1540 [<000000003375b17c>] worker_thread+0x70a/0xed0 [<00000000b0d43cd9>] kthread+0x29f/0x340 [<000000008d770833>] ret_from_fork+0x1f/0x30 unreferenced object 0xff11000333089a00 (size 128): | ||||
| CVE-2023-54100 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix use after free bug in qedi_remove() In qedi_probe() we call __qedi_probe() which initializes &qedi->recovery_work with qedi_recovery_handler() and &qedi->board_disable_work with qedi_board_disable_work(). When qedi_schedule_recovery_handler() is called, schedule_delayed_work() will finally start the work. In qedi_remove(), which is called to remove the driver, the following sequence may be observed: Fix this by finishing the work before cleanup in qedi_remove(). CPU0 CPU1 |qedi_recovery_handler qedi_remove | __qedi_remove | iscsi_host_free | scsi_host_put | //free shost | |iscsi_host_for_each_session |//use qedi->shost Cancel recovery_work and board_disable_work in __qedi_remove(). | ||||
| CVE-2023-54084 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire-digi00x: prevent potential use after free This code was supposed to return an error code if init_stream() failed, but it instead freed dg00x->rx_stream and returned success. This potentially leads to a use after free. | ||||
| CVE-2023-54079 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq27xxx: Fix poll_interval handling and races on remove Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. | ||||
| CVE-2023-54076 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix missed ses refcounting Use new cifs_smb_ses_inc_refcount() helper to get an active reference of @ses and @ses->dfs_root_ses (if set). This will prevent @ses->dfs_root_ses of being put in the next call to cifs_put_smb_ses() and thus potentially causing an use-after-free bug. | ||||
| CVE-2023-54073 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site The following crash was reported: [ 1950.279393] list_del corruption, ffff99560d485790->next is NULL [ 1950.279400] ------------[ cut here ]------------ [ 1950.279401] kernel BUG at lib/list_debug.c:49! [ 1950.279405] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 1950.279407] CPU: 11 PID: 5886 Comm: modprobe Tainted: G O 6.2.8_1 #1 [ 1950.279409] Hardware name: Gigabyte Technology Co., Ltd. B550M AORUS PRO-P/B550M AORUS PRO-P, BIOS F15c 05/11/2022 [ 1950.279410] RIP: 0010:__list_del_entry_valid+0x59/0xc0 [ 1950.279415] Code: 48 8b 01 48 39 f8 75 5a 48 8b 72 08 48 39 c6 75 65 b8 01 00 00 00 c3 cc cc cc cc 48 89 fe 48 c7 c7 08 a8 13 9e e8 b7 0a bc ff <0f> 0b 48 89 fe 48 c7 c7 38 a8 13 9e e8 a6 0a bc ff 0f 0b 48 89 fe [ 1950.279416] RSP: 0018:ffffa96d05647e08 EFLAGS: 00010246 [ 1950.279418] RAX: 0000000000000033 RBX: ffff99560d485750 RCX: 0000000000000000 [ 1950.279419] RDX: 0000000000000000 RSI: ffffffff9e107c59 RDI: 00000000ffffffff [ 1950.279420] RBP: ffffffffc19c5168 R08: 0000000000000000 R09: ffffa96d05647cc8 [ 1950.279421] R10: 0000000000000003 R11: ffffffff9ea2a568 R12: 0000000000000000 [ 1950.279422] R13: ffff99560140a2e0 R14: ffff99560127d2e0 R15: 0000000000000000 [ 1950.279422] FS: 00007f67da795380(0000) GS:ffff995d1f0c0000(0000) knlGS:0000000000000000 [ 1950.279424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1950.279424] CR2: 00007f67da7e65c0 CR3: 00000001feed2000 CR4: 0000000000750ee0 [ 1950.279426] PKRU: 55555554 [ 1950.279426] Call Trace: [ 1950.279428] <TASK> [ 1950.279430] hwrng_unregister+0x28/0xe0 [rng_core] [ 1950.279436] tpm_chip_unregister+0xd5/0xf0 [tpm] Add the forgotten !tpm_amd_is_rng_defective() invariant to the hwrng_unregister() call site inside tpm_chip_unregister(). | ||||
| CVE-2023-54072 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix potential data race at PCM memory allocation helpers The PCM memory allocation helpers have a sanity check against too many buffer allocations. However, the check is performed without a proper lock and the allocation isn't serialized; this allows user to allocate more memories than predefined max size. Practically seen, this isn't really a big problem, as it's more or less some "soft limit" as a sanity check, and it's not possible to allocate unlimitedly. But it's still better to address this for more consistent behavior. The patch covers the size check in do_alloc_pages() with the card->memory_mutex, and increases the allocated size there for preventing the further overflow. When the actual allocation fails, the size is decreased accordingly. | ||||