Export limit exceeded: 340122 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 76517 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (76517 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68360 | 1 Linux | 1 Linux Kernel | 2026-02-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: wed: use proper wed reference in mt76 wed driver callabacks MT7996 driver can use both wed and wed_hif2 devices to offload traffic from/to the wireless NIC. In the current codebase we assume to always use the primary wed device in wed callbacks resulting in the following crash if the hw runs wed_hif2 (e.g. 6GHz link). [ 297.455876] Unable to handle kernel read from unreadable memory at virtual address 000000000000080a [ 297.464928] Mem abort info: [ 297.467722] ESR = 0x0000000096000005 [ 297.471461] EC = 0x25: DABT (current EL), IL = 32 bits [ 297.476766] SET = 0, FnV = 0 [ 297.479809] EA = 0, S1PTW = 0 [ 297.482940] FSC = 0x05: level 1 translation fault [ 297.487809] Data abort info: [ 297.490679] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 297.496156] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 297.501196] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 297.506500] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000107480000 [ 297.512927] [000000000000080a] pgd=08000001097fb003, p4d=08000001097fb003, pud=08000001097fb003, pmd=0000000000000000 [ 297.523532] Internal error: Oops: 0000000096000005 [#1] SMP [ 297.715393] CPU: 2 UID: 0 PID: 45 Comm: kworker/u16:2 Tainted: G O 6.12.50 #0 [ 297.723908] Tainted: [O]=OOT_MODULE [ 297.727384] Hardware name: Banana Pi BPI-R4 (2x SFP+) (DT) [ 297.732857] Workqueue: nf_ft_offload_del nf_flow_rule_route_ipv6 [nf_flow_table] [ 297.740254] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 297.747205] pc : mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.752688] lr : mtk_wed_flow_remove+0x58/0x80 [ 297.757126] sp : ffffffc080fe3ae0 [ 297.760430] x29: ffffffc080fe3ae0 x28: ffffffc080fe3be0 x27: 00000000deadbef7 [ 297.767557] x26: ffffff80c5ebca00 x25: 0000000000000001 x24: ffffff80c85f4c00 [ 297.774683] x23: ffffff80c1875b78 x22: ffffffc080d42cd0 x21: ffffffc080660018 [ 297.781809] x20: ffffff80c6a076d0 x19: ffffff80c6a043c8 x18: 0000000000000000 [ 297.788935] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000 [ 297.796060] x14: 0000000000000019 x13: ffffff80c0ad8ec0 x12: 00000000fa83b2da [ 297.803185] x11: ffffff80c02700c0 x10: ffffff80c0ad8ec0 x9 : ffffff81fef96200 [ 297.810311] x8 : ffffff80c02700c0 x7 : ffffff80c02700d0 x6 : 0000000000000002 [ 297.817435] x5 : 0000000000000400 x4 : 0000000000000000 x3 : 0000000000000000 [ 297.824561] x2 : 0000000000000001 x1 : 0000000000000800 x0 : ffffff80c6a063c8 [ 297.831686] Call trace: [ 297.834123] mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.839254] mtk_wed_flow_remove+0x58/0x80 [ 297.843342] mtk_flow_offload_cmd+0x434/0x574 [ 297.847689] mtk_wed_setup_tc_block_cb+0x30/0x40 [ 297.852295] nf_flow_offload_ipv6_hook+0x7f4/0x964 [nf_flow_table] [ 297.858466] nf_flow_rule_route_ipv6+0x438/0x4a4 [nf_flow_table] [ 297.864463] process_one_work+0x174/0x300 [ 297.868465] worker_thread+0x278/0x430 [ 297.872204] kthread+0xd8/0xdc [ 297.875251] ret_from_fork+0x10/0x20 [ 297.878820] Code: 928b5ae0 8b000273 91400a60 f943fa61 (79401421) [ 297.884901] ---[ end trace 0000000000000000 ]--- Fix the issue detecting the proper wed reference to use running wed callabacks. | ||||
| CVE-2025-68353 | 1 Linux | 1 Linux Kernel | 2026-02-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: vxlan: prevent NULL deref in vxlan_xmit_one Neither sock4 nor sock6 pointers are guaranteed to be non-NULL in vxlan_xmit_one, e.g. if the iface is brought down. This can lead to the following NULL dereference: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:vxlan_xmit_one+0xbb3/0x1580 Call Trace: vxlan_xmit+0x429/0x610 dev_hard_start_xmit+0x55/0xa0 __dev_queue_xmit+0x6d0/0x7f0 ip_finish_output2+0x24b/0x590 ip_output+0x63/0x110 Mentioned commits changed the code path in vxlan_xmit_one and as a side effect the sock4/6 pointer validity checks in vxlan(6)_get_route were lost. Fix this by adding back checks. Since both commits being fixed were released in the same version (v6.7) and are strongly related, bundle the fixes in a single commit. | ||||
| CVE-2025-68349 | 1 Linux | 1 Linux Kernel | 2026-02-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid Fixes a crash when layout is null during this call stack: write_inode -> nfs4_write_inode -> pnfs_layoutcommit_inode pnfs_set_layoutcommit relies on the lseg refcount to keep the layout around. Need to clear NFS_INO_LAYOUTCOMMIT otherwise we might attempt to reference a null layout. | ||||
| CVE-2025-68346 | 1 Linux | 1 Linux Kernel | 2026-02-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: dice: fix buffer overflow in detect_stream_formats() The function detect_stream_formats() reads the stream_count value directly from a FireWire device without validating it. This can lead to out-of-bounds writes when a malicious device provides a stream_count value greater than MAX_STREAMS. Fix by applying the same validation to both TX and RX stream counts in detect_stream_formats(). | ||||
| CVE-2025-68141 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-02-06 | 7.4 High |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, during the deserialization of a `DC_ChargeLoopRes` message that includes Receipt as well as TaxCosts, the vector `<DetailedTax>tax_costs` in the target `Receipt` structure is accessed out of bounds. This occurs in the method `template <> void convert(const struct iso20_dc_DetailedTaxType& in, datatypes::DetailedTax& out)` which leads to a null pointer dereference and causes the module to terminate. The EVerest processes and all its modules shut down, affecting all EVSE. Version 2025.10.0 fixes the issue. | ||||
| CVE-2025-68137 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-02-06 | 8.4 High |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, an integer overflow occurring in `SdpPacket::parse_header()` allows the current buffer length to be set to 7 after a complete header of size 8 has been read. The remaining length to read is computed using the current length subtracted by the header length which results in a negative value. This value is then interpreted as `SIZE_MAX` (or slightly less) because the expected type of the argument is `size_t`. Depending on whether the server is plain TCP or TLS, this leads to either an infinite loop or a stack buffer overflow. Version 2025.10.0 fixes the issue. | ||||
| CVE-2025-68136 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-02-06 | 7.4 High |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, once the module receives a SDP request, it creates a whole new set of objects like `Session`, `IConnection` which open new TCP socket for the ISO15118-20 communications and registers callbacks for the created file descriptor, without closing and destroying the previous ones. Previous `Session` is not saved and the usage of an `unique_ptr` is lost, destroying connection data. Latter, if the used socket and therefore file descriptor is not the last one, it will lead to a null pointer dereference. Version 2025.10.0 fixes the issue. | ||||
| CVE-2025-68134 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-02-06 | 7.4 High |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, the use of the `assert` function to handle errors frequently causes the module to crash. This is particularly critical because the manager shuts down all other modules and exits when any one of them terminates, leading to a denial of service. In a context where a manager handles multiple EVSE, this would also impact other users. Version 2025.10.0 fixes the issue. | ||||
| CVE-2025-68133 | 2 Everest, Linuxfoundation | 2 Everest-core, Everest | 2026-02-06 | 7.4 High |
| EVerest is an EV charging software stack. In versions 2025.9.0 and below, an attacker can exhaust the operating system's memory and cause the module to terminate by initiating an unlimited number of TCP connections that never proceed to ISO 15118-2 communication. This is possible because a new thread is started for each incoming plain TCP or TLS socket connection before any verification occurs, and the verification performed is too permissive. The EVerest processes and all its modules shut down, affecting all EVSE functionality. This issue is fixed in version 2025.10.0. | ||||
| CVE-2025-13502 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2026-02-06 | 7.5 High |
| A flaw was found in WebKitGTK and WPE WebKit. This vulnerability allows an out-of-bounds read and integer underflow, leading to a UIProcess crash (DoS) via a crafted payload to the GLib remote inspector server. | ||||
| CVE-2024-53862 | 1 Argoproj | 2 Argo-workflows, Argo Workflows | 2026-02-06 | 7.5 High |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. When using `--auth-mode=client`, Archived Workflows can be retrieved with a fake or spoofed token via the GET Workflow endpoint: `/api/v1/workflows/{namespace}/{name}` or when using `--auth-mode=sso`, all Archived Workflows can be retrieved with a valid token via the GET Workflow endpoint: `/api/v1/workflows/{namespace}/{name}`. No authentication is performed by the Server itself on `client` tokens. Authentication & authorization is instead delegated to the k8s API server. However, the Workflow Archive does not interact with k8s, and so any token that looks valid will be considered authenticated, even if it is not a k8s token or even if the token has no RBAC for Argo. To handle the lack of pass-through k8s authN/authZ, the Workflow Archive specifically does the equivalent of a `kubectl auth can-i` check for respective methods. In 3.5.7 and 3.5.8, the auth check was accidentally removed on the GET Workflow endpoint's fallback to archived workflows on these lines, allowing archived workflows to be retrieved with a fake token. This vulnerability is fixed in 3.6.2 and 3.5.13. | ||||
| CVE-2025-62156 | 1 Argoproj | 2 Argo-workflows, Argo Workflows | 2026-02-06 | 8.1 High |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. Versions prior to 3.6.12 and versions 3.7.0 through 3.7.2 contain a Zip Slip path traversal vulnerability in artifact extraction. During artifact extraction the unpack/untar logic (workflow/executor/executor.go) uses filepath.Join(dest, filepath.Clean(header.Name)) without validating that header.Name stays within the intended extraction directory. A malicious archive entry can supply a traversal or absolute path that, after cleaning, overrides the destination directory and causes files to be written outside the /work/tmp extraction path and into system directories such as /etc inside the container. The vulnerability enables arbitrary file creation or overwrite in system configuration locations (for example /etc/passwd, /etc/hosts, /etc/crontab), which can lead to privilege escalation or persistence within the affected container. Update to 3.6.12 or 3.7.3 to remediate the issue. | ||||
| CVE-2022-29164 | 1 Argoproj | 1 Argo Workflows | 2026-02-06 | 7.1 High |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. In affected versions an attacker can create a workflow which produces a HTML artifact containing an HTML file that contains a script which uses XHR calls to interact with the Argo Server API. The attacker emails the deep-link to the artifact to their victim. The victim opens the link, the script starts running. As the script has access to the Argo Server API (as the victim), so may read information about the victim’s workflows, or create and delete workflows. Note the attacker must be an insider: they must have access to the same cluster as the victim and must already be able to run their own workflows. The attacker must have an understanding of the victim’s system. We have seen no evidence of this in the wild. We urge all users to upgrade to the fixed versions. | ||||
| CVE-2019-25273 | 1 Easy-hide-ip | 1 Easy-hide-ip | 2026-02-06 | 7.8 High |
| Easy-Hide-IP 5.0.0.3 contains an unquoted service path vulnerability in the EasyRedirect service that allows local attackers to potentially execute arbitrary code. Attackers can exploit the unquoted path in 'C:\Program Files\Easy-Hide-IP\rdr\EasyRedirect.exe' to inject malicious executables and escalate privileges. | ||||
| CVE-2019-25272 | 1 Tenaxsoft | 1 Cyberplanet | 2026-02-06 | 7.8 High |
| TexasSoft CyberPlanet 6.4.131 contains an unquoted service path vulnerability in the CCSrvProxy service that allows local attackers to execute arbitrary code. Attackers can exploit the unquoted path in 'C:\Program Files (x86)\TenaxSoft\CyberPlanet\SrvProxy.exe' to inject malicious executables and gain elevated system privileges. | ||||
| CVE-2019-25271 | 1 Netgate | 1 Data Backup | 2026-02-06 | 7.8 High |
| NETGATE Data Backup 3.0.620 contains an unquoted service path vulnerability in its NGDatBckpSrv Windows service configuration. Attackers can exploit the unquoted path to inject and execute malicious code with LocalSystem privileges by placing executable files in specific directory locations. | ||||
| CVE-2019-25269 | 1 Microsoft | 1 Windows | 2026-02-06 | 7.8 High |
| Amiti Antivirus 25.0.640 contains an unquoted service path vulnerability in its Windows service configurations. Attackers can exploit the unquoted path to inject and execute malicious code with elevated LocalSystem privileges by placing executable files in specific directory locations. | ||||
| CVE-2026-24052 | 2 Anthropic, Anthropics | 2 Claude Code, Claude Code | 2026-02-06 | 7.4 High |
| Claude Code is an agentic coding tool. Prior to version 1.0.111, Claude Code contained insufficient URL validation in its trusted domain verification mechanism for WebFetch requests. The application used a startsWith() function to validate trusted domains (e.g., docs.python.org, modelcontextprotocol.io), this could have enabled attackers to register domains like modelcontextprotocol.io.example.com that would pass validation. This could enable automatic requests to attacker-controlled domains without user consent, potentially leading to data exfiltration. This issue has been patched in version 1.0.111. | ||||
| CVE-2026-24887 | 2 Anthropic, Anthropics | 2 Claude Code, Claude Code | 2026-02-06 | 8.8 High |
| Claude Code is an agentic coding tool. Prior to version 2.0.72, due to an error in command parsing, it was possible to bypass the Claude Code confirmation prompt to trigger execution of untrusted commands through the find command. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This issue has been patched in version 2.0.72. | ||||
| CVE-2025-47270 | 2026-02-06 | 7.5 High | ||
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. The `nimiq-network-libp2p` subcrate of nimiq/core-rs-albatross is vulnerable to a Denial of Service (DoS) attack due to uncontrolled memory allocation. Specifically, the implementation of the `Discovery` network message handling allocates a buffer based on a length value provided by the peer, without enforcing an upper bound. Since this length is a `u32`, a peer can trigger allocations of up to 4 GB, potentially leading to memory exhaustion and node crashes. As Discovery messages are regularly exchanged for peer discovery, this vulnerability can be exploited repeatedly. The patch for this vulnerability is formally released as part of v1.1.0. The patch implements a limit to the discovery message size of 1 MB and also resizes the message buffer size incrementally as the data is read. No known workarounds are available. | ||||