Export limit exceeded: 17035 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17035 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23145 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_xattr_inode_update_ref The error branch for ext4_xattr_inode_update_ref forget to release the refcount for iloc.bh. Find this when review code. | ||||
| CVE-2026-23147 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zlib: fix the folio leak on S390 hardware acceleration [BUG] After commit aa60fe12b4f4 ("btrfs: zlib: refactor S390x HW acceleration buffer preparation"), we no longer release the folio of the page cache of folio returned by btrfs_compress_filemap_get_folio() for S390 hardware acceleration path. [CAUSE] Before that commit, we call kumap_local() and folio_put() after handling each folio. Although the timing is not ideal (it release previous folio at the beginning of the loop, and rely on some extra cleanup out of the loop), it at least handles the folio release correctly. Meanwhile the refactored code is easier to read, it lacks the call to release the filemap folio. [FIX] Add the missing folio_put() for copy_data_into_buffer(). | ||||
| CVE-2026-23153 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition against transaction list The list of transaction is enumerated without acquiring card lock when processing AR response event. This causes a race condition bug when processing AT request completion event concurrently. This commit fixes the bug by put timer start for split transaction expiration into the scope of lock. The value of jiffies in card structure is referred before acquiring the lock. | ||||
| CVE-2026-23118 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix data-race warning and potential load/store tearing Fix the following: BUG: KCSAN: data-race in rxrpc_peer_keepalive_worker / rxrpc_send_data_packet which is reporting an issue with the reads and writes to ->last_tx_at in: conn->peer->last_tx_at = ktime_get_seconds(); and: keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME; The lockless accesses to these to values aren't actually a problem as the read only needs an approximate time of last transmission for the purposes of deciding whether or not the transmission of a keepalive packet is warranted yet. Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bit arch. Fix both of these by switching to an unsigned int for ->last_tx_at and only storing the LSW of the time64_t. It can then be reconstructed at need provided no more than 68 years has elapsed since the last transmission. | ||||
| CVE-2026-23136 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: reset sparse-read state in osd_fault() When a fault occurs, the connection is abandoned, reestablished, and any pending operations are retried. The OSD client tracks the progress of a sparse-read reply using a separate state machine, largely independent of the messenger's state. If a connection is lost mid-payload or the sparse-read state machine returns an error, the sparse-read state is not reset. The OSD client will then interpret the beginning of a new reply as the continuation of the old one. If this makes the sparse-read machinery enter a failure state, it may never recover, producing loops like: libceph: [0] got 0 extents libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read Therefore, reset the sparse-read state in osd_fault(), ensuring retries start from a clean state. | ||||
| CVE-2026-23150 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame(). syzbot reported various memory leaks related to NFC, struct nfc_llcp_sock, sk_buff, nfc_dev, etc. [0] The leading log hinted that nfc_llcp_send_ui_frame() failed to allocate skb due to sock_error(sk) being -ENXIO. ENXIO is set by nfc_llcp_socket_release() when struct nfc_llcp_local is destroyed by local_cleanup(). The problem is that there is no synchronisation between nfc_llcp_send_ui_frame() and local_cleanup(), and skb could be put into local->tx_queue after it was purged in local_cleanup(): CPU1 CPU2 ---- ---- nfc_llcp_send_ui_frame() local_cleanup() |- do { ' |- pdu = nfc_alloc_send_skb(..., &err) | . | |- nfc_llcp_socket_release(local, false, ENXIO); | |- skb_queue_purge(&local->tx_queue); | | ' | |- skb_queue_tail(&local->tx_queue, pdu); | ... | |- pdu = nfc_alloc_send_skb(..., &err) | ^._________________________________.' local_cleanup() is called for struct nfc_llcp_local only after nfc_llcp_remove_local() unlinks it from llcp_devices. If we hold local->tx_queue.lock then, we can synchronise the thread and nfc_llcp_send_ui_frame(). Let's do that and check list_empty(&local->list) before queuing skb to local->tx_queue in nfc_llcp_send_ui_frame(). [0]: [ 56.074943][ T6096] llcp: nfc_llcp_send_ui_frame: Could not allocate PDU (error=-6) [ 64.318868][ T5813] kmemleak: 6 new suspected memory leaks (see /sys/kernel/debug/kmemleak) BUG: memory leak unreferenced object 0xffff8881272f6800 (size 1024): comm "syz.0.17", pid 6096, jiffies 4294942766 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 03 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc da58d84d): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x3e3/0x6b0 mm/slub.c:5658 kmalloc_noprof include/linux/slab.h:961 [inline] sk_prot_alloc+0x11a/0x1b0 net/core/sock.c:2239 sk_alloc+0x36/0x360 net/core/sock.c:2295 nfc_llcp_sock_alloc+0x37/0x130 net/nfc/llcp_sock.c:979 llcp_sock_create+0x71/0xd0 net/nfc/llcp_sock.c:1044 nfc_sock_create+0xc9/0xf0 net/nfc/af_nfc.c:31 __sock_create+0x1a9/0x340 net/socket.c:1605 sock_create net/socket.c:1663 [inline] __sys_socket_create net/socket.c:1700 [inline] __sys_socket+0xb9/0x1a0 net/socket.c:1747 __do_sys_socket net/socket.c:1761 [inline] __se_sys_socket net/socket.c:1759 [inline] __x64_sys_socket+0x1b/0x30 net/socket.c:1759 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f BUG: memory leak unreferenced object 0xffff88810fbd9800 (size 240): comm "syz.0.17", pid 6096, jiffies 4294942850 hex dump (first 32 bytes): 68 f0 ff 08 81 88 ff ff 68 f0 ff 08 81 88 ff ff h.......h....... 00 00 00 00 00 00 00 00 00 68 2f 27 81 88 ff ff .........h/'.... backtrace (crc 6cc652b1): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5336 __alloc_skb+0x203/0x240 net/core/skbuff.c:660 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0x69/0x3f0 net/core/sk ---truncated--- | ||||
| CVE-2026-23155 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): fix error message Sinc commit 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error") a failing resubmit URB will print an info message. In the case of a short read where netdev has not yet been assigned, initialize as NULL to avoid dereferencing an undefined value. Also report the error value of the failed resubmit. | ||||
| CVE-2026-23172 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: fix potential skb->frags overflow in RX path When receiving data in the DPMAIF RX path, the t7xx_dpmaif_set_frag_to_skb() function adds page fragments to an skb without checking if the number of fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and potentially causing kernel crashes or other undefined behavior. This issue was identified through static code analysis by comparing with a similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76: fix array overflow on receiving too many fragments for a packet"). The vulnerability could be triggered if the modem firmware sends packets with excessive fragments. While under normal protocol conditions (MTU 3080 bytes, BAT buffer 3584 bytes), a single packet should not require additional fragments, the kernel should not blindly trust firmware behavior. Malicious, buggy, or compromised firmware could potentially craft packets with more fragments than the kernel expects. Fix this by adding a bounds check before calling skb_add_rx_frag() to ensure nr_frags does not exceed MAX_SKB_FRAGS. The check must be performed before unmapping to avoid a page leak and double DMA unmap during device teardown. | ||||
| CVE-2026-23114 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: ptrace: Fix SVE writes on !SME systems When SVE is supported but SME is not supported, a ptrace write to the NT_ARM_SVE regset can place the tracee into an invalid state where (non-streaming) SVE register data is stored in FP_STATE_SVE format but TIF_SVE is clear. This can result in a later warning from fpsimd_restore_current_state(), e.g. WARNING: CPU: 0 PID: 7214 at arch/arm64/kernel/fpsimd.c:383 fpsimd_restore_current_state+0x50c/0x748 When this happens, fpsimd_restore_current_state() will set TIF_SVE, placing the task into the correct state. This occurs before any other check of TIF_SVE can possibly occur, as other checks of TIF_SVE only happen while the FPSIMD/SVE/SME state is live. Thus, aside from the warning, there is no functional issue. This bug was introduced during rework to error handling in commit: 9f8bf718f2923 ("arm64/fpsimd: ptrace: Gracefully handle errors") ... where the setting of TIF_SVE was moved into a block which is only executed when system_supports_sme() is true. Fix this by removing the system_supports_sme() check. This ensures that TIF_SVE is set for (SVE-formatted) writes to NT_ARM_SVE, at the cost of unconditionally manipulating the tracee's saved svcr value. The manipulation of svcr is benign and inexpensive, and we already do similar elsewhere (e.g. during signal handling), so I don't think it's worth guarding this with system_supports_sme() checks. Aside from the above, there is no functional change. The 'type' argument to sve_set_common() is only set to ARM64_VEC_SME (in ssve_set())) when system_supports_sme(), so the ARM64_VEC_SME case in the switch statement is still unreachable when !system_supports_sme(). When CONFIG_ARM64_SME=n, the only caller of sve_set_common() is sve_set(), and the compiler can constant-fold for the case where type is ARM64_VEC_SVE, removing the logic for other cases. | ||||
| CVE-2026-23149 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm: Do not allow userspace to trigger kernel warnings in drm_gem_change_handle_ioctl() Since GEM bo handles are u32 in the uapi and the internal implementation uses idr_alloc() which uses int ranges, passing a new handle larger than INT_MAX trivially triggers a kernel warning: idr_alloc(): ... if (WARN_ON_ONCE(start < 0)) return -EINVAL; ... Fix it by rejecting new handles above INT_MAX and at the same time make the end limit calculation more obvious by moving into int domain. | ||||
| CVE-2026-23125 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key initialization fails: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2 RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline] RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401 Call Trace: sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189 sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111 sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217 sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169 sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052 sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88 sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243 sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127 The issue is triggered when sctp_auth_asoc_init_active_key() fails in sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the command sequence is currently: - SCTP_CMD_PEER_INIT - SCTP_CMD_TIMER_STOP (T1_INIT) - SCTP_CMD_TIMER_START (T1_COOKIE) - SCTP_CMD_NEW_STATE (COOKIE_ECHOED) - SCTP_CMD_ASSOC_SHKEY - SCTP_CMD_GEN_COOKIE_ECHO If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL to be queued by sctp_datamsg_from_user(). Since command interpretation stops on failure, no COOKIE_ECHO should been sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As a result, the DATA chunk can be transmitted together with the COOKIE_ECHO in sctp_outq_flush_data(), leading to the observed issue. Similar to the other places where it calls sctp_auth_asoc_init_active_key() right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting T1_COOKIE. This ensures that if shared key generation fails, authenticated DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT, giving the client another chance to process INIT_ACK and retry key setup. | ||||
| CVE-2026-23113 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop Currently this is checked before running the pending work. Normally this is quite fine, as work items either end up blocking (which will create a new worker for other items), or they complete fairly quickly. But syzbot reports an issue where io-wq takes seemingly forever to exit, and with a bit of debugging, this turns out to be because it queues a bunch of big (2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't support ->read_iter(), loop_rw_iter() ends up handling them. Each read returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of these pending, processing the whole chain can take a long time. Easily longer than the syzbot uninterruptible sleep timeout of 140 seconds. This then triggers a complaint off the io-wq exit path: INFO: task syz.4.135:6326 blocked for more than 143 seconds. Not tainted syzkaller #0 Blocked by coredump. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000 Call Trace: <TASK> context_switch kernel/sched/core.c:5256 [inline] __schedule+0x1139/0x6150 kernel/sched/core.c:6863 __schedule_loop kernel/sched/core.c:6945 [inline] schedule+0xe7/0x3a0 kernel/sched/core.c:6960 schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75 do_wait_for_common kernel/sched/completion.c:100 [inline] __wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121 io_wq_exit_workers io_uring/io-wq.c:1328 [inline] io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356 io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203 io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651 io_uring_files_cancel include/linux/io_uring.h:19 [inline] do_exit+0x2ce/0x2bd0 kernel/exit.c:911 do_group_exit+0xd3/0x2a0 kernel/exit.c:1112 get_signal+0x2671/0x26d0 kernel/signal.c:3034 arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:41 [inline] exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa02738f749 RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098 RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98 There's really nothing wrong here, outside of processing these reads will take a LONG time. However, we can speed up the exit by checking the IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will exit the ring after queueing up all of these reads. Then once the first item is processed, io-wq will simply cancel the rest. That should avoid syzbot running into this complaint again. | ||||
| CVE-2026-23141 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: send: check for inline extents in range_is_hole_in_parent() Before accessing the disk_bytenr field of a file extent item we need to check if we are dealing with an inline extent. This is because for inline extents their data starts at the offset of the disk_bytenr field. So accessing the disk_bytenr means we are accessing inline data or in case the inline data is less than 8 bytes we can actually cause an invalid memory access if this inline extent item is the first item in the leaf or access metadata from other items. | ||||
| CVE-2025-71200 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes. Add a check to prevent illegal clock reduction through debugfs: root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock root@debian:/# [ 30.090146] mmc0: running CQE recovery mmc0: cqhci: Failed to halt mmc0: cqhci: spurious TCN for tag 0 WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24 Modules linked in: CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT Hardware name: Rockchip RK3588 EVB1 V10 Board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : cqhci_irq+0x254/0x818 lr : cqhci_irq+0x254/0x818 ... | ||||
| CVE-2026-23156 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: efivarfs: fix error propagation in efivar_entry_get() efivar_entry_get() always returns success even if the underlying __efivar_entry_get() fails, masking errors. This may result in uninitialized heap memory being copied to userspace in the efivarfs_file_read() path. Fix it by returning the error from __efivar_entry_get(). | ||||
| CVE-2026-23117 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: add missing ice_deinit_hw() in devlink reinit path devlink-reload results in ice_init_hw failed error, and then removing the ice driver causes a NULL pointer dereference. [ +0.102213] ice 0000:ca:00.0: ice_init_hw failed: -16 ... [ +0.000001] Call Trace: [ +0.000003] <TASK> [ +0.000006] ice_unload+0x8f/0x100 [ice] [ +0.000081] ice_remove+0xba/0x300 [ice] Commit 1390b8b3d2be ("ice: remove duplicate call to ice_deinit_hw() on error paths") removed ice_deinit_hw() from ice_deinit_dev(). As a result ice_devlink_reinit_down() no longer calls ice_deinit_hw(), but ice_devlink_reinit_up() still calls ice_init_hw(). Since the control queues are not uninitialized, ice_init_hw() fails with -EBUSY. Add ice_deinit_hw() to ice_devlink_reinit_down() to correspond with ice_init_hw() in ice_devlink_reinit_up(). | ||||
| CVE-2026-23146 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling hci_uart_register_dev(), which calls proto->open() to initialize hu->priv. However, if a TTY write wakeup occurs during this window, hci_uart_tx_wakeup() may schedule write_work before hu->priv is initialized, leading to a NULL pointer dereference in hci_uart_write_work() when proto->dequeue() accesses hu->priv. The race condition is: CPU0 CPU1 ---- ---- hci_uart_set_proto() set_bit(HCI_UART_PROTO_INIT) hci_uart_register_dev() tty write wakeup hci_uart_tty_wakeup() hci_uart_tx_wakeup() schedule_work(&hu->write_work) proto->open(hu) // initializes hu->priv hci_uart_write_work() hci_uart_dequeue() proto->dequeue(hu) // accesses hu->priv (NULL!) Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open() succeeds, ensuring hu->priv is initialized before any work can be scheduled. | ||||
| CVE-2026-23126 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix a race issue related to the operation on bpf_bound_progs list The netdevsim driver lacks a protection mechanism for operations on the bpf_bound_progs list. When the nsim_bpf_create_prog() performs list_add_tail, it is possible that nsim_bpf_destroy_prog() is simultaneously performs list_del. Concurrent operations on the list may lead to list corruption and trigger a kernel crash as follows: [ 417.290971] kernel BUG at lib/list_debug.c:62! [ 417.290983] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 417.290992] CPU: 10 PID: 168 Comm: kworker/10:1 Kdump: loaded Not tainted 6.19.0-rc5 #1 [ 417.291003] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 417.291007] Workqueue: events bpf_prog_free_deferred [ 417.291021] RIP: 0010:__list_del_entry_valid_or_report+0xa7/0xc0 [ 417.291034] Code: a8 ff 0f 0b 48 89 fe 48 89 ca 48 c7 c7 48 a1 eb ae e8 ed fb a8 ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 80 a1 eb ae e8 d9 fb a8 ff <0f> 0b 48 89 d1 48 c7 c7 d0 a1 eb ae 48 89 f2 48 89 c6 e8 c2 fb a8 [ 417.291040] RSP: 0018:ffffb16a40807df8 EFLAGS: 00010246 [ 417.291046] RAX: 000000000000006d RBX: ffff8e589866f500 RCX: 0000000000000000 [ 417.291051] RDX: 0000000000000000 RSI: ffff8e59f7b23180 RDI: ffff8e59f7b23180 [ 417.291055] RBP: ffffb16a412c9000 R08: 0000000000000000 R09: 0000000000000003 [ 417.291059] R10: ffffb16a40807c80 R11: ffffffffaf9edce8 R12: ffff8e594427ac20 [ 417.291063] R13: ffff8e59f7b44780 R14: ffff8e58800b7a05 R15: 0000000000000000 [ 417.291074] FS: 0000000000000000(0000) GS:ffff8e59f7b00000(0000) knlGS:0000000000000000 [ 417.291079] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.291083] CR2: 00007fc4083efe08 CR3: 00000001c3626006 CR4: 0000000000770ee0 [ 417.291088] PKRU: 55555554 [ 417.291091] Call Trace: [ 417.291096] <TASK> [ 417.291103] nsim_bpf_destroy_prog+0x31/0x80 [netdevsim] [ 417.291154] __bpf_prog_offload_destroy+0x2a/0x80 [ 417.291163] bpf_prog_dev_bound_destroy+0x6f/0xb0 [ 417.291171] bpf_prog_free_deferred+0x18e/0x1a0 [ 417.291178] process_one_work+0x18a/0x3a0 [ 417.291188] worker_thread+0x27b/0x3a0 [ 417.291197] ? __pfx_worker_thread+0x10/0x10 [ 417.291207] kthread+0xe5/0x120 [ 417.291214] ? __pfx_kthread+0x10/0x10 [ 417.291221] ret_from_fork+0x31/0x50 [ 417.291230] ? __pfx_kthread+0x10/0x10 [ 417.291236] ret_from_fork_asm+0x1a/0x30 [ 417.291246] </TASK> Add a mutex lock, to prevent simultaneous addition and deletion operations on the list. | ||||
| CVE-2026-23162 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/nvm: Fix double-free on aux add failure After a successful auxiliary_device_init(), aux_dev->dev.release (xe_nvm_release_dev()) is responsible for the kfree(nvm). When there is failure with auxiliary_device_add(), driver will call auxiliary_device_uninit(), which call put_device(). So that the .release callback will be triggered to free the memory associated with the auxiliary_device. Move the kfree(nvm) into the auxiliary_device_init() failure path and remove the err goto path to fix below error. " [ 13.232905] ================================================================== [ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe] [ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273 [ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary) ... [ 13.233125] Call Trace: [ 13.233126] <TASK> [ 13.233127] dump_stack_lvl+0x7f/0xc0 [ 13.233132] print_report+0xce/0x610 [ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0 [ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe] ... " v2: drop err goto path. (Alexander) (cherry picked from commit a3187c0c2bbd947ffff97f90d077ac88f9c2a215) | ||||
| CVE-2026-23151 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix memory leak in set_ssp_complete Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures are not freed after being removed from the pending list. Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced mgmt_pending_foreach() calls with individual command handling but missed adding mgmt_pending_free() calls in both error and success paths of set_ssp_complete(). Other completion functions like set_le_complete() were fixed correctly in the same commit. This causes a memory leak of the mgmt_pending_cmd structure and its associated parameter data for each SSP command that completes. Add the missing mgmt_pending_free(cmd) calls in both code paths to fix the memory leak. Also fix the same issue in set_advertising_complete(). | ||||