Export limit exceeded: 17539 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17539 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50875 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will be NULL, and strcmp() will cause null pointer dereference. | ||||
| CVE-2022-50818 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix running_req for internal abort commands Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp(). | ||||
| CVE-2022-50658 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix memory leak in error path If for some reason the speedbin length is incorrect, then there is a memory leak in the error path because we never free the speedbin buffer. This commit fixes the error path to always free the speedbin buffer. | ||||
| CVE-2023-53707 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix integer overflow in amdgpu_cs_pass1 The type of size is unsigned int, if size is 0x40000000, there will be an integer overflow, size will be zero after size *= sizeof(uint32_t), will cause uninitialized memory to be referenced later. | ||||
| CVE-2025-40356 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix DMA-API usage Use DMA-API dma_map_single() call for getting the DMA address of the transfer buffer instead of hacking with virt_to_phys(). This fixes the following DMA-API debug warning: ------------[ cut here ]------------ DMA-API: rockchip-sfc fe300000.spi: device driver tries to sync DMA memory it has not allocated [device address=0x000000000cf70000] [size=288 bytes] WARNING: kernel/dma/debug.c:1106 at check_sync+0x1d8/0x690, CPU#2: systemd-udevd/151 Modules linked in: ... Hardware name: Hardkernel ODROID-M1 (DT) pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : check_sync+0x1d8/0x690 lr : check_sync+0x1d8/0x690 .. Call trace: check_sync+0x1d8/0x690 (P) debug_dma_sync_single_for_cpu+0x84/0x8c __dma_sync_single_for_cpu+0x88/0x234 rockchip_sfc_exec_mem_op+0x4a0/0x798 [spi_rockchip_sfc] spi_mem_exec_op+0x408/0x498 spi_nor_read_data+0x170/0x184 spi_nor_read_sfdp+0x74/0xe4 spi_nor_parse_sfdp+0x120/0x11f0 spi_nor_sfdp_init_params_deprecated+0x3c/0x8c spi_nor_scan+0x690/0xf88 spi_nor_probe+0xe4/0x304 spi_mem_probe+0x6c/0xa8 spi_probe+0x94/0xd4 really_probe+0xbc/0x298 ... | ||||
| CVE-2025-68774 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix missing hfs_bnode_get() in __hfs_bnode_create When sync() and link() are called concurrently, both threads may enter hfs_bnode_find() without finding the node in the hash table and proceed to create it. Thread A: hfsplus_write_inode() -> hfsplus_write_system_inode() -> hfs_btree_write() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0) Thread B: hfsplus_create_cat() -> hfs_brec_insert() -> hfs_bnode_split() -> hfs_bmap_alloc() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0) In this case, thread A creates the bnode, sets refcnt=1, and hashes it. Thread B also tries to create the same bnode, notices it has already been inserted, drops its own instance, and uses the hashed one without getting the node. ``` node2 = hfs_bnode_findhash(tree, cnid); if (!node2) { <- Thread A hash = hfs_bnode_hash(cnid); node->next_hash = tree->node_hash[hash]; tree->node_hash[hash] = node; tree->node_hash_cnt++; } else { <- Thread B spin_unlock(&tree->hash_lock); kfree(node); wait_event(node2->lock_wq, !test_bit(HFS_BNODE_NEW, &node2->flags)); return node2; } ``` However, hfs_bnode_find() requires each call to take a reference. Here both threads end up setting refcnt=1. When they later put the node, this triggers: BUG_ON(!atomic_read(&node->refcnt)) In this scenario, Thread B in fact finds the node in the hash table rather than creating a new one, and thus must take a reference. Fix this by calling hfs_bnode_get() when reusing a bnode newly created by another thread to ensure the refcount is updated correctly. A similar bug was fixed in HFS long ago in commit a9dc087fd3c4 ("fix missing hfs_bnode_get() in __hfs_bnode_create") but the same issue remained in HFS+ until now. | ||||
| CVE-2022-50776 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: st: Fix memory leak in st_of_quadfs_setup() If st_clk_register_quadfs_pll() fails, @lock should be freed before goto @err_exit, otherwise will cause meory leak issue, fix it. | ||||
| CVE-2025-68773 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: fsl-cpm: Check length parity before switching to 16 bit mode Commit fc96ec826bce ("spi: fsl-cpm: Use 16 bit mode for large transfers with even size") failed to make sure that the size is really even before switching to 16 bit mode. Until recently the problem went unnoticed because kernfs uses a pre-allocated bounce buffer of size PAGE_SIZE for reading EEPROM. But commit 8ad6249c51d0 ("eeprom: at25: convert to spi-mem API") introduced an additional dynamically allocated bounce buffer whose size is exactly the size of the transfer, leading to a buffer overrun in the fsl-cpm driver when that size is odd. Add the missing length parity verification and remain in 8 bit mode when the length is not even. | ||||
| CVE-2025-40358 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: stacktrace: Disable KASAN checks for non-current tasks Unwinding the stack of a task other than current, KASAN would report "BUG: KASAN: out-of-bounds in walk_stackframe+0x41c/0x460" There is a same issue on x86 and has been resolved by the commit 84936118bdf3 ("x86/unwind: Disable KASAN checks for non-current tasks") The solution could be applied to RISC-V too. This patch also can solve the issue: https://seclists.org/oss-sec/2025/q4/23 [pjw@kernel.org: clean up checkpatch issues] | ||||
| CVE-2022-50581 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs: fix OOB Read in __hfs_brec_find Syzbot reported a OOB read bug: ================================================================== BUG: KASAN: slab-out-of-bounds in hfs_strcmp+0x117/0x190 fs/hfs/string.c:84 Read of size 1 at addr ffff88807eb62c4e by task kworker/u4:1/11 CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted 6.1.0-rc6-syzkaller-00308-g644e9524388a #0 Workqueue: writeback wb_workfn (flush-7:0) Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report+0xcd/0x100 mm/kasan/report.c:495 hfs_strcmp+0x117/0x190 fs/hfs/string.c:84 __hfs_brec_find+0x213/0x5c0 fs/hfs/bfind.c:75 hfs_brec_find+0x276/0x520 fs/hfs/bfind.c:138 hfs_write_inode+0x34c/0xb40 fs/hfs/inode.c:462 write_inode fs/fs-writeback.c:1440 [inline] If the input inode of hfs_write_inode() is incorrect: struct inode struct hfs_inode_info struct hfs_cat_key struct hfs_name u8 len # len is greater than HFS_NAMELEN(31) which is the maximum length of an HFS filename OOB read occurred: hfs_write_inode() hfs_brec_find() __hfs_brec_find() hfs_cat_keycmp() hfs_strcmp() # OOB read occurred due to len is too large Fix this by adding a Check on len in hfs_write_inode() before calling hfs_brec_find(). | ||||
| CVE-2023-53834 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ina2xx: avoid NULL pointer dereference on OF device match The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table. | ||||
| CVE-2025-40360 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: Do not dereference NULL pointer in plane reset The plane state in __drm_gem_reset_shadow_plane() can be NULL. Do not deref that pointer, but forward NULL to the other plane-reset helpers. Clears plane->state to NULL. v2: - fix typo in commit description (Javier) | ||||
| CVE-2025-68771 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix kernel BUG in ocfs2_find_victim_chain syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the `cl_next_free_rec` field of the allocation chain list (next free slot in the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec) condition in ocfs2_find_victim_chain() and panicking the kernel. To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(), just before calling ocfs2_find_victim_chain(), the code block in it being executed when either of the following conditions is true: 1. `cl_next_free_rec` is equal to 0, indicating that there are no free chains in the allocation chain list 2. `cl_next_free_rec` is greater than `cl_count` (the total number of chains in the allocation chain list) Either of them being true is indicative of the fact that there are no chains left for usage. This is addressed using ocfs2_error(), which prints the error log for debugging purposes, rather than panicking the kernel. | ||||
| CVE-2025-68769 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix return value of f2fs_recover_fsync_data() With below scripts, it will trigger panic in f2fs: mkfs.f2fs -f /dev/vdd mount /dev/vdd /mnt/f2fs touch /mnt/f2fs/foo sync echo 111 >> /mnt/f2fs/foo f2fs_io fsync /mnt/f2fs/foo f2fs_io shutdown 2 /mnt/f2fs umount /mnt/f2fs mount -o ro,norecovery /dev/vdd /mnt/f2fs or mount -o ro,disable_roll_forward /dev/vdd /mnt/f2fs F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 0 F2FS-fs (vdd): Mounted with checkpoint version = 7f5c361f F2FS-fs (vdd): Stopped filesystem due to reason: 0 F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 1 Filesystem f2fs get_tree() didn't set fc->root, returned 1 ------------[ cut here ]------------ kernel BUG at fs/super.c:1761! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 722 Comm: mount Not tainted 6.18.0-rc2+ #721 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:vfs_get_tree.cold+0x18/0x1a Call Trace: <TASK> fc_mount+0x13/0xa0 path_mount+0x34e/0xc50 __x64_sys_mount+0x121/0x150 do_syscall_64+0x84/0x800 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fa6cc126cfe The root cause is we missed to handle error number returned from f2fs_recover_fsync_data() when mounting image w/ ro,norecovery or ro,disable_roll_forward mount option, result in returning a positive error number to vfs_get_tree(), fix it. | ||||
| CVE-2023-53766 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: FS: JFS: Check for read-only mounted filesystem in txBegin This patch adds a check for read-only mounted filesystem in txBegin before starting a transaction potentially saving from NULL pointer deref. | ||||
| CVE-2023-54216 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Fix using eswitch mapping in nic mode Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 ---truncated--- | ||||
| CVE-2022-50716 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out syzkaller reported use-after-free with the stack trace like below [1]: [ 38.960489][ C3] ================================================================== [ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240 [ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0 [ 38.966363][ C3] [ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18 [ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 [ 38.969959][ C3] Call Trace: [ 38.970841][ C3] <IRQ> [ 38.971663][ C3] dump_stack_lvl+0xfc/0x174 [ 38.972620][ C3] print_report.cold+0x2c3/0x752 [ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.974644][ C3] kasan_report+0xb1/0x1d0 [ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240 [ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0 [ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430 [ 38.981266][ C3] dummy_timer+0x140c/0x34e0 [ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0 [ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.986242][ C3] ? lock_release+0x51c/0x790 [ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70 [ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130 [ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 38.990777][ C3] ? lock_acquire+0x472/0x550 [ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.993138][ C3] ? lock_acquire+0x472/0x550 [ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230 [ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0 [ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0 [ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0 [ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0 [ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0 [ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10 [ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40 [ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0 [ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0 [ 39.016196][ C3] __do_softirq+0x1d2/0x9be [ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190 [ 39.019004][ C3] irq_exit_rcu+0x5/0x20 [ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0 [ 39.021965][ C3] </IRQ> [ 39.023237][ C3] <TASK> In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below (there are other functions which finally call ar5523_cmd()): ar5523_probe() -> ar5523_host_available() -> ar5523_cmd_read() -> ar5523_cmd() If ar5523_cmd() timed out, then ar5523_host_available() failed and ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb() might touch the freed structure. This patch fixes this issue by canceling in-flight tx cmd if submitted urb timed out. | ||||
| CVE-2022-50756 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix mempool alloc size Convert the max size to bytes to match the units of the divisor that calculates the worst-case number of PRP entries. The result is used to determine how many PRP Lists are required. The code was previously rounding this to 1 list, but we can require 2 in the worst case. In that scenario, the driver would corrupt memory beyond the size provided by the mempool. While unlikely to occur (you'd need a 4MB in exactly 127 phys segments on a queue that doesn't support SGLs), this memory corruption has been observed by kfence. | ||||
| CVE-2023-53823 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block/rq_qos: protect rq_qos apis with a new lock commit 50e34d78815e ("block: disable the elevator int del_gendisk") move rq_qos_exit() from disk_release() to del_gendisk(), this will introduce some problems: 1) If rq_qos_add() is triggered by enabling iocost/iolatency through cgroupfs, then it can concurrent with del_gendisk(), it's not safe to write 'q->rq_qos' concurrently. 2) Activate cgroup policy that is relied on rq_qos will call rq_qos_add() and blkcg_activate_policy(), and if rq_qos_exit() is called in the middle, null-ptr-dereference will be triggered in blkcg_activate_policy(). 3) blkg_conf_open_bdev() can call blkdev_get_no_open() first to find the disk, then if rq_qos_exit() from del_gendisk() is done before rq_qos_add(), then memory will be leaked. This patch add a new disk level mutex 'rq_qos_mutex': 1) The lock will protect rq_qos_exit() directly. 2) For wbt that doesn't relied on blk-cgroup, rq_qos_add() can only be called from disk initialization for now because wbt can't be destructed until rq_qos_exit(), so it's safe not to protect wbt for now. Hoever, in case that rq_qos dynamically destruction is supported in the furture, this patch also protect rq_qos_add() from wbt_init() directly, this is enough because blk-sysfs already synchronize writers with disk removal. 3) For iocost and iolatency, in order to synchronize disk removal and cgroup configuration, the lock is held after blkdev_get_no_open() from blkg_conf_open_bdev(), and is released in blkg_conf_exit(). In order to fix the above memory leak, disk_live() is checked after holding the new lock. | ||||
| CVE-2022-50888 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use res->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref. | ||||