Export limit exceeded: 347735 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (347735 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43045 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix error handling in mshv_region_pin The current error handling has two issues: First, pin_user_pages_fast() can return a short pin count (less than requested but greater than zero) when it cannot pin all requested pages. This is treated as success, leading to partially pinned regions being used, which causes memory corruption. Second, when an error occurs mid-loop, already pinned pages from the current batch are not properly accounted for before calling mshv_region_invalidate_pages(), causing a page reference leak. Treat short pins as errors and fix partial batch accounting before cleanup. | ||||
| CVE-2026-43047 | 1 Linux | 1 Linux Kernel | 2026-05-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early. | ||||
| CVE-2026-43048 | 1 Linux | 1 Linux Kernel | 2026-05-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin Tissoires <bentiss@kernel.org> [bentiss: changed the return value] | ||||
| CVE-2026-31747 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: me4000: Fix potential overrun of firmware buffer `me4000_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Note: The firmware loading was totally broken before commit ac584af59945 ("staging: comedi: me4000: fix firmware downloading"), but that is the most sensible target for this fix. | ||||
| CVE-2026-31748 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. | ||||
| CVE-2026-43049 | 1 Linux | 1 Linux Kernel | 2026-05-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure Presently, if the force feedback initialisation fails when probing the Logitech G920 Driving Force Racing Wheel for Xbox One, an error number will be returned and propagated before the userspace infrastructure (sysfs and /dev/input) has been torn down. If userspace ignores the errors and continues to use its references to these dangling entities, a UAF will promptly follow. We have 2 options; continue to return the error, but ensure that all of the infrastructure is torn down accordingly or continue to treat this condition as a warning by emitting the message but returning success. It is thought that the original author's intention was to emit the warning but keep the device functional, less the force feedback feature, so let's go with that. | ||||
| CVE-2026-43050 | 1 Linux | 1 Linux Kernel | 2026-05-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converting priv->lecd to an RCU-protected pointer: - Mark priv->lecd as __rcu in lec.h - Use rcu_assign_pointer() in lec_atm_close() and lecd_attach() for safe pointer assignment - Use rcu_access_pointer() for NULL checks that do not dereference the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and lecd_attach() - Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(), lec_handle_bridge() and lec_atm_send() to safely access lecd - Use rcu_assign_pointer() followed by synchronize_rcu() in lec_atm_close() to ensure all readers have completed before proceeding. This is safe since lec_atm_close() is called from vcc_release() which holds lock_sock(), a sleeping lock. - Remove the manual sk_receive_queue drain from lec_atm_close() since vcc_destroy_socket() already drains it after lec_atm_close() returns. v2: Switch from spinlock + sock_hold/put approach to RCU to properly fix the race. The v1 spinlock approach had two issues pointed out by Eric Dumazet: 1. priv->lecd was still accessed directly after releasing the lock instead of using a local copy. 2. The spinlock did not prevent packets being queued after lec_atm_close() drains sk_receive_queue since timer and workqueue paths bypass netif_stop_queue(). Note: Syzbot patch testing was attempted but the test VM terminated unexpectedly with "Connection to localhost closed by remote host", likely due to a QEMU AHCI emulation issue unrelated to this fix. Compile testing with "make W=1 net/atm/lec.o" passes cleanly. | ||||
| CVE-2026-43051 | 1 Linux | 1 Linux Kernel | 2026-05-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received. | ||||
| CVE-2026-43054 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Drain commands in target_reset handler tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS without draining any in-flight commands. The SCSI EH documentation (scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver has made lower layers "forget about timed out scmds" and is ready for new commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug, mpi3mr) enforces this by draining or completing outstanding commands before returning SUCCESS. Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight scsi_cmnd structures for recovery commands (e.g. TUR) while the target core still has async completion work queued for the old se_cmd. The memset in queuecommand zeroes se_lun and lun_ref_active, causing transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN reference prevents transport_clear_lun_ref() from completing, hanging configfs LUN unlink forever in D-state: INFO: task rm:264 blocked for more than 122 seconds. rm D 0 264 258 0x00004000 Call Trace: __schedule+0x3d0/0x8e0 schedule+0x36/0xf0 transport_clear_lun_ref+0x78/0x90 [target_core_mod] core_tpg_remove_lun+0x28/0xb0 [target_core_mod] target_fabric_port_unlink+0x50/0x60 [target_core_mod] configfs_unlink+0x156/0x1f0 [configfs] vfs_unlink+0x109/0x290 do_unlinkat+0x1d5/0x2d0 Fix this by making tcm_loop_target_reset() actually drain commands: 1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that the target core knows about (those not yet CMD_T_COMPLETE). 2. Use blk_mq_tagset_busy_iter() to iterate all started requests and flush_work() on each se_cmd — this drains any deferred completion work for commands that already had CMD_T_COMPLETE set before the TMR (which the TMR skips via __target_check_io_state()). This is the same pattern used by mpi3mr, scsi_debug, and libsas to drain outstanding commands during reset. | ||||
| CVE-2026-43055 | 1 Linux | 1 Linux Kernel | 2026-05-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: file: Use kzalloc_flex for aio_cmd The target_core_file doesn't initialize the aio_cmd->iocb for the ki_write_stream. When a write command fd_execute_rw_aio() is executed, we may get a bogus ki_write_stream value, causing unintended write failure status when checking iocb->ki_write_stream > max_write_streams in the block device. Let's just use kzalloc_flex when allocating the aio_cmd and let ki_write_stream=0 to fix this issue. | ||||
| CVE-2026-43057 | 1 Linux | 1 Linux Kernel | 2026-05-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback NETIF_F_IPV6_CSUM only advertises support for checksum offload of packets without IPv6 extension headers. Packets with extension headers must fall back onto software checksumming. Since TSO depends on checksum offload, those must revert to GSO. The below commit introduces that fallback. It always checks network header length. For tunneled packets, the inner header length must be checked instead. Extend the check accordingly. A special case is tunneled packets without inner IP protocol. Such as RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by transport header either, so also must revert to the software GSO path. | ||||
| CVE-2026-43505 | 1 Prosody | 1 Prosody | 2026-05-01 | 6.5 Medium |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5, when mod_proxy65 is enabled. Because mod_proxy65 mishandles access control in the activation scenario, relaying of unauthenticated traffic can occur. | ||||
| CVE-2026-43506 | 1 Prosody | 1 Prosody | 2026-05-01 | 5.3 Medium |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by memory leaks from unauthenticated connections. | ||||
| CVE-2026-43507 | 1 Prosody | 1 Prosody | 2026-05-01 | 5.3 Medium |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by XML parsing resource amplification from unauthenticated connections. | ||||
| CVE-2026-23863 | 2026-05-01 | 6.5 Medium | ||
| An attachment spoofing issue in WhatsApp for Windows prior to v2.3000.1032164386.258709 could have allowed maliciously formatted documents with embedded NUL bytes in the filename to be shown in the application as one type of file but run as an executable when opened. We have not seen evidence of exploitation in the wild. | ||||
| CVE-2026-35233 | 1 Oracle Corporation | 1 Oracle Linux | 2026-05-01 | 4.4 Medium |
| An unprivileged attacker can craft a user-space process with a malicious ELF binary containing an out-of-range sh_link field. When root-level dtrace attaches to -- or instruments -- that process (via dtrace -p , pid probes, or USDT), the ELF parser reads heap memory beyond the allocated section cache array without any bounds check. This results in an uninitialized/out-of-bounds heap read that can cause a NULL pointer dereference crash of the dtrace process (DoS), or -- depending on heap layout -- a read-then-use of a garbage pointer controlled by adjacent allocations, providing a foothold toward further exploitation in a privileged context. | ||||
| CVE-2026-31702 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io() In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring the F2FS_WB_CP_DATA counter to zero, unblocking f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount CPU. The unmount path then proceeds to call f2fs_destroy_page_array_cache(sbi), which destroys sbi->page_array_slab via kmem_cache_destroy(), and eventually kfree(sbi). Meanwhile, the bio completion callback is still executing: when it reaches page_array_free(sbi, ...), it dereferences sbi->page_array_slab — a destroyed slab cache — to call kmem_cache_free(), causing a use-after-free. This is the same class of bug as CVE-2026-23234 (which fixed the equivalent race in f2fs_write_end_io() in data.c), but in the compressed writeback completion path that was not covered by that fix. Fix this by moving dec_page_count() to after page_array_free(), so that all sbi accesses complete before the counter decrement that can unblock unmount. For non-last folios (where atomic_dec_return on cic->pending_pages is nonzero), dec_page_count is called immediately before returning — page_array_free is not reached on this path, so there is no post-decrement sbi access. For the last folio, page_array_free runs while the F2FS_WB_CP_DATA counter is still nonzero (this folio has not yet decremented it), keeping sbi alive, and dec_page_count runs as the final operation. | ||||
| CVE-2026-31704 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use check_add_overflow() to prevent u16 DACL size overflow set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes in u16 variables. When a file has many POSIX ACL entries, the accumulated size can wrap past 65535, causing the pointer arithmetic (char *)pndace + *size to land within already-written ACEs. Subsequent writes then overwrite earlier entries, and pndacl->size gets a truncated value. Use check_add_overflow() at each accumulation point to detect the wrap before it corrupts the buffer, consistent with existing check_mul_overflow() usage elsewhere in smbacl.c. | ||||
| CVE-2026-31721 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: move list and spinlock inits from bind to alloc There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, the bind function re-initialized the queues while there were still items in them. The solution is to move the initialization from hidg_bind to hidg_alloc to extend their lifetimes to the lifetime of the function instance. Additionally, I found many other possibly problematic init calls in the bind function, which I moved as well. | ||||
| CVE-2026-7599 | 2026-05-01 | 6.3 Medium | ||
| A vulnerability was detected in Dayoooun hwpx-mcp 0.2.0. This affects the function save_document/export_to_text/export_to_html of the file mcp-server/src/index.ts of the component MCP Interface. Performing a manipulation of the argument output_path results in path traversal. Remote exploitation of the attack is possible. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||