Export limit exceeded: 345207 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 345207 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (345207 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23168 | 1 Linux | 1 Linux Kernel | 2026-04-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: flex_proportions: make fprop_new_period() hardirq safe Bernd has reported a lockdep splat from flexible proportions code that is essentially complaining about the following race: <timer fires> run_timer_softirq - we are in softirq context call_timer_fn writeout_period fprop_new_period write_seqcount_begin(&p->sequence); <hardirq is raised> ... blk_mq_end_request() blk_update_request() ext4_end_bio() folio_end_writeback() __wb_writeout_add() __fprop_add_percpu_max() if (unlikely(max_frac < FPROP_FRAC_BASE)) { fprop_fraction_percpu() seq = read_seqcount_begin(&p->sequence); - sees odd sequence so loops indefinitely Note that a deadlock like this is only possible if the bdi has configured maximum fraction of writeout throughput which is very rare in general but frequent for example for FUSE bdis. To fix this problem we have to make sure write section of the sequence counter is irqsafe. | ||||
| CVE-2026-33505 | 1 Ory | 1 Keto | 2026-04-17 | 7.2 High |
| Ory Keto is am open source authorization server for managing permissions at scale. Prior to version 26.2.0, the GetRelationships API in Ory Keto is vulnerable to SQL injection due to flaws in its pagination implementation. Pagination tokens are encrypted using the secret configured in `secrets.pagination`. An attacker who knows this secret can craft their own tokens, including malicious tokens that lead to SQL injection. If this configuration value is not set, Keto falls back to a hard-coded default pagination encryption secret. Because this default value is publicly known, attackers can generate valid and malicious pagination tokens manually for installations where this secret is not set. This issue can be exploited when GetRelationships API is directly or indirectly accessible to the attacker, the attacker can pass a raw pagination token to the affected API, and the configuration value `secrets.pagination` is not set or known to the attacker. An attacker can execute arbitrary SQL queries through forged pagination tokens. As a first line of defense, immediately configure a custom value for `secrets.pagination` by generating a cryptographically secure random secret. Next, upgrade Keto to a fixed version, 26.2.0 or later, as soon as possible. | ||||
| CVE-2026-33503 | 1 Ory | 1 Kratos | 2026-04-17 | 7.2 High |
| Ory Kratos is an identity, user management and authentication system for cloud services. Prior to version 26.2.0, the ListCourierMessages Admin API in Ory Kratos is vulnerable to SQL injection due to flaws in its pagination implementation. Pagination tokens are encrypted using the secret configured in `secrets.pagination`. An attacker who knows this secret can craft their own tokens, including malicious tokens that lead to SQL injection. If this configuration value is not set, Kratos falls back to a default pagination encryption secret. Because this default value is publicly known, attackers can generate valid and malicious pagination tokens manually for installations where this secret is not set. As a first line of defense, immediately configure a custom value for `secrets.pagination` by generating a cryptographically secure random secret. Next, upgrade Kratos** to a fixed version, 26.2.0 or later, as soon as possible. | ||||
| CVE-2026-40111 | 2 Mervinpraison, Praison | 2 Praisonaiagents, Praisonaiagents | 2026-04-17 | 8.8 High |
| PraisonAIAgents is a multi-agent teams system. Prior to 1.5.128, he memory hooks executor in praisonaiagents passes a user-controlled command string directly to subprocess.run() with shell=True at src/praisonai-agents/praisonaiagents/memory/hooks.py. No sanitization is performed and shell metacharacters are interpreted by /bin/sh before the intended command executes. Two independent attack surfaces exist. The first is via pre_run_command and post_run_command hook event types registered through the hooks configuration. The second and more severe surface is the .praisonai/hooks.json lifecycle configuration, where hooks registered for events such as BEFORE_TOOL and AFTER_TOOL fire automatically during agent operation. An agent that gains file-write access through prompt injection can overwrite .praisonai/hooks.json and have its payload execute silently at every subsequent lifecycle event without further user interaction. This vulnerability is fixed in 1.5.128. | ||||
| CVE-2026-32220 | 1 Microsoft | 8 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 5 more | 2026-04-17 | 4.4 Medium |
| Improper access control in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to bypass a security feature locally. | ||||
| CVE-2026-40112 | 2 Mervinpraison, Praison | 2 Praisonai, Praisonai | 2026-04-17 | 5.4 Medium |
| PraisonAI is a multi-agent teams system. Prior to 4.5.128, the Flask API endpoint in src/praisonai/api.py renders agent output as HTML without effective sanitization. The _sanitize_html function relies on the nh3 library, which is not listed as a required or optional dependency in pyproject.toml. When nh3 is absent (the default installation), the sanitizer is a no-op that returns HTML unchanged. An attacker who can influence agent input (via RAG data poisoning, web scraping results, or prompt injection) can inject arbitrary JavaScript that executes in the browser of anyone viewing the API output. This vulnerability is fixed in 4.5.128. | ||||
| CVE-2026-32221 | 1 Microsoft | 8 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 5 more | 2026-04-17 | 8.4 High |
| Heap-based buffer overflow in Microsoft Graphics Component allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-32222 | 1 Microsoft | 8 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 5 more | 2026-04-17 | 7.8 High |
| Untrusted pointer dereference in Windows Win32K - ICOMP allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-32223 | 1 Microsoft | 8 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 5 more | 2026-04-17 | 6.8 Medium |
| Heap-based buffer overflow in Windows USB Print Driver allows an unauthorized attacker to elevate privileges with a physical attack. | ||||
| CVE-2026-40113 | 2 Mervinpraison, Praison | 2 Praisonai, Praisonai | 2026-04-17 | 8.4 High |
| PraisonAI is a multi-agent teams system. Prior to 4.5.128, deploy.py constructs a single comma-delimited string for the gcloud run deploy --set-env-vars argument by directly interpolating openai_model, openai_key, and openai_base without validating that these values do not contain commas. gcloud uses a comma as the key-value pair separator for --set-env-vars. A comma in any of the three values causes gcloud to parse the trailing text as additional KEY=VALUE definitions, injecting arbitrary environment variables into the deployed Cloud Run service. This vulnerability is fixed in 4.5.128. | ||||
| CVE-2026-32224 | 1 Microsoft | 2 Windows 11 26h1, Windows 11 26h1 | 2026-04-17 | 7 High |
| Use after free in Windows Server Update Service allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-32225 | 1 Microsoft | 30 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 27 more | 2026-04-17 | 8.8 High |
| Protection mechanism failure in Windows Shell allows an unauthorized attacker to bypass a security feature over a network. | ||||
| CVE-2026-33096 | 1 Microsoft | 15 Windows 11 22h3, Windows 11 23h2, Windows 11 23h2 and 12 more | 2026-04-17 | 7.5 High |
| Out-of-bounds read in Windows HTTP.sys allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-23170 | 1 Linux | 1 Linux Kernel | 2026-04-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/imx/tve: fix probe device leak Make sure to drop the reference taken to the DDC device during probe on probe failure (e.g. probe deferral) and on driver unbind. | ||||
| CVE-2026-23178 | 1 Linux | 1 Linux Kernel | 2026-04-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report() `i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data into `ihid->rawbuf`. The former can come from the userspace in the hidraw driver and is only bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set `max_buffer_size` field of `struct hid_ll_driver` which we do not). The latter has size determined at runtime by the maximum size of different report types you could receive on any particular device and can be a much smaller value. Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`. The impact is low since access to hidraw devices requires root. | ||||
| CVE-2026-23181 | 1 Linux | 1 Linux Kernel | 2026-04-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: sync read disk super and set block size When the user performs a btrfs mount, the block device is not set correctly. The user sets the block size of the block device to 0x4000 by executing the BLKBSZSET command. Since the block size change also changes the mapping->flags value, this further affects the result of the mapping_min_folio_order() calculation. Let's analyze the following two scenarios: Scenario 1: Without executing the BLKBSZSET command, the block size is 0x1000, and mapping_min_folio_order() returns 0; Scenario 2: After executing the BLKBSZSET command, the block size is 0x4000, and mapping_min_folio_order() returns 2. do_read_cache_folio() allocates a folio before the BLKBSZSET command is executed. This results in the allocated folio having an order value of 0. Later, after BLKBSZSET is executed, the block size increases to 0x4000, and the mapping_min_folio_order() calculation result becomes 2. This leads to two undesirable consequences: 1. filemap_add_folio() triggers a VM_BUG_ON_FOLIO(folio_order(folio) < mapping_min_folio_order(mapping)) assertion. 2. The syzbot report [1] shows a null pointer dereference in create_empty_buffers() due to a buffer head allocation failure. Synchronization should be established based on the inode between the BLKBSZSET command and read cache page to prevent inconsistencies in block size or mapping flags before and after folio allocation. [1] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:create_empty_buffers+0x4d/0x480 fs/buffer.c:1694 Call Trace: folio_create_buffers+0x109/0x150 fs/buffer.c:1802 block_read_full_folio+0x14c/0x850 fs/buffer.c:2403 filemap_read_folio+0xc8/0x2a0 mm/filemap.c:2496 do_read_cache_folio+0x266/0x5c0 mm/filemap.c:4096 do_read_cache_page mm/filemap.c:4162 [inline] read_cache_page_gfp+0x29/0x120 mm/filemap.c:4195 btrfs_read_disk_super+0x192/0x500 fs/btrfs/volumes.c:1367 | ||||
| CVE-2026-23186 | 1 Linux | 1 Linux Kernel | 2026-04-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (acpi_power_meter) Fix deadlocks related to acpi_power_meter_notify() The acpi_power_meter driver's .notify() callback function, acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock that is also acquired by callbacks in sysfs attributes of the device being unregistered which is prone to deadlocks between sysfs access and device removal. Address this by moving the hwmon device removal in acpi_power_meter_notify() outside the lock in question, but notice that doing it alone is not sufficient because two concurrent METER_NOTIFY_CONFIG notifications may be attempting to remove the same device at the same time. To prevent that from happening, add a new lock serializing the execution of the switch () statement in acpi_power_meter_notify(). For simplicity, it is a static mutex which should not be a problem from the performance perspective. The new lock also allows the hwmon_device_register_with_info() in acpi_power_meter_notify() to be called outside the inner lock because it prevents the other notifications handled by that function from manipulating the "resource" object while the hwmon device based on it is being registered. The sending of ACPI netlink messages from acpi_power_meter_notify() is serialized by the new lock too which generally helps to ensure that the order of handling firmware notifications is the same as the order of sending netlink messages related to them. In addition, notice that hwmon_device_register_with_info() may fail in which case resource->hwmon_dev will become an error pointer, so add checks to avoid attempting to unregister the hwmon device pointer to by it in that case to acpi_power_meter_notify() and acpi_power_meter_remove(). | ||||
| CVE-2026-23189 | 1 Linux | 1 Linux Kernel | 2026-04-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix NULL pointer dereference in ceph_mds_auth_match() The CephFS kernel client has regression starting from 6.18-rc1. We have issue in ceph_mds_auth_match() if fs_name == NULL: const char fs_name = mdsc->fsc->mount_options->mds_namespace; ... if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) { / fsname mismatch, try next one */ return 0; } Patrick Donnelly suggested that: In summary, we should definitely start decoding `fs_name` from the MDSMap and do strict authorizations checks against it. Note that the `-o mds_namespace=foo` should only be used for selecting the file system to mount and nothing else. It's possible no mds_namespace is specified but the kernel will mount the only file system that exists which may have name "foo". This patch reworks ceph_mdsmap_decode() and namespace_equals() with the goal of supporting the suggested concept. Now struct ceph_mdsmap contains m_fs_name field that receives copy of extracted FS name by ceph_extract_encoded_string(). For the case of "old" CephFS file systems, it is used "cephfs" name. [ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(), get rid of a series of strlen() calls in ceph_namespace_match(), drop changes to namespace_equals() body to avoid treating empty mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap() as namespace_equals() isn't an equivalent substitution there ] | ||||
| CVE-2026-23190 | 1 Linux | 1 Linux Kernel | 2026-04-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: fix memory leak in acp3x pdm dma ops | ||||
| CVE-2026-23200 | 1 Linux | 1 Linux Kernel | 2026-04-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6 route. [0] Commit f72514b3c569 ("ipv6: clear RA flags when adding a static route") introduced logic to clear RTF_ADDRCONF from existing routes when a static route with the same nexthop is added. However, this causes a problem when the existing route has a gateway. When RTF_ADDRCONF is cleared from a route that has a gateway, that route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns true. The issue is that this route was never added to the fib6_siblings list. This leads to a mismatch between the following counts: - The sibling count computed by iterating fib6_next chain, which includes the newly ECMP-eligible route - The actual siblings in fib6_siblings list, which does not include that route When a subsequent ECMP route is added, fib6_add_rt2node() hits BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the counts don't match. Fix this by only clearing RTF_ADDRCONF when the existing route does not have a gateway. Routes without a gateway cannot qualify for ECMP anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing RTF_ADDRCONF on them is safe and matches the original intent of the commit. [0]: kernel BUG at net/ipv6/ip6_fib.c:1217! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217 [...] Call Trace: <TASK> fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532 __ip6_ins_rt net/ipv6/route.c:1351 [inline] ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946 ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571 inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577 sock_do_ioctl+0xdc/0x300 net/socket.c:1245 sock_ioctl+0x576/0x790 net/socket.c:1366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||