Export limit exceeded: 345220 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (345220 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23001 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u | ||||
| CVE-2026-23003 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv() Blamed commit did not take care of VLAN encapsulations as spotted by syzbot [1]. Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull(). [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729 __ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860 ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903 gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1 ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500 ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:318 [inline] ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core net/core/dev.c:6139 [inline] __netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252 netif_receive_skb_internal net/core/dev.c:6338 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6397 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4960 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586 __alloc_skb+0x805/0x1040 net/core/skbuff.c:690 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712 sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995 tun_alloc_skb drivers/net/tun.c:1461 [inline] tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 | ||||
| CVE-2026-23007 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: zero non-PI portion of auto integrity buffer The auto-generated integrity buffer for writes needs to be fully initialized before being passed to the underlying block device, otherwise the uninitialized memory can be read back by userspace or anyone with physical access to the storage device. If protection information is generated, that portion of the integrity buffer is already initialized. The integrity data is also zeroed if PI generation is disabled via sysfs or the PI tuple size is 0. However, this misses the case where PI is generated and the PI tuple size is nonzero, but the metadata size is larger than the PI tuple. In this case, the remainder ("opaque") of the metadata is left uninitialized. Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the metadata is larger than just the PI tuple. | ||||
| CVE-2026-23008 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix KMS with 3D on HW version 10 HW version 10 does not have GB Surfaces so there is no backing buffer for surface backed FBs. This would result in a nullptr dereference and crash the driver causing a black screen. | ||||
| CVE-2026-23011 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_gre: make ipgre_header() robust Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust") Over the years, syzbot found many ways to crash the kernel in ipgre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ipgre device. [1] skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0 kernel BUG at net/core/skbuff.c:213 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213 Call Trace: <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 | ||||
| CVE-2026-23012 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: remove call_control in inactive contexts If damon_call() is executed against a DAMON context that is not running, the function returns error while keeping the damon_call_control object linked to the context's call_controls list. Let's suppose the object is deallocated after the damon_call(), and yet another damon_call() is executed against the same context. The function tries to add the new damon_call_control object to the call_controls list, which still has the pointer to the previous damon_call_control object, which is deallocated. As a result, use-after-free happens. This can actually be triggered using the DAMON sysfs interface. It is not easily exploitable since it requires the sysfs write permission and making a definitely weird file writes, though. Please refer to the report for more details about the issue reproduction steps. Fix the issue by making two changes. Firstly, move the final kdamond_call() for cancelling all existing damon_call() requests from terminating DAMON context to be done before the ctx->kdamond reset. This makes any code that sees NULL ctx->kdamond can safely assume the context may not access damon_call() requests anymore. Secondly, let damon_call() to cleanup the damon_call_control objects that were added to the already-terminated DAMON context, before returning the error. | ||||
| CVE-2026-1407 | 1 Beetel | 2 777vr1, 777vr1 Firmware | 2026-04-18 | 2 Low |
| A security flaw has been discovered in Beetel 777VR1 up to 01.00.09/01.00.09_55. This affects an unknown part of the component UART Interface. Performing a manipulation results in information disclosure. The attack may be carried out on the physical device. The attack is considered to have high complexity. It is indicated that the exploitability is difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-1408 | 1 Beetel | 2 777vr1, 777vr1 Firmware | 2026-04-18 | 2 Low |
| A weakness has been identified in Beetel 777VR1 up to 01.00.09/01.00.09_55. This vulnerability affects unknown code of the component UART Interface. Executing a manipulation can lead to weak password requirements. The physical device can be targeted for the attack. The attack requires a high level of complexity. It is stated that the exploitability is difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-1409 | 1 Beetel | 2 777vr1, 777vr1 Firmware | 2026-04-18 | 2 Low |
| A security vulnerability has been detected in Beetel 777VR1 up to 01.00.09/01.00.09_55. This issue affects some unknown processing of the component UART Interface. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack on the physical device. The attack's complexity is rated as high. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-1410 | 1 Beetel | 2 777vr1, 777vr1 Firmware | 2026-04-18 | 6.4 Medium |
| A vulnerability was detected in Beetel 777VR1 up to 01.00.09/01.00.09_55. Impacted is an unknown function of the component UART Interface. The manipulation results in missing authentication. An attack on the physical device is feasible. This attack is characterized by high complexity. The exploitability is considered difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-1412 | 1 Sangfor | 1 Operation And Maintenance Security Management System | 2026-04-18 | 7.3 High |
| A vulnerability has been found in Sangfor Operation and Maintenance Security Management System up to 3.0.12. The impacted element is an unknown function of the file /fort/audit/get_clip_img of the component HTTP POST Request Handler. Such manipulation of the argument frame/dirno leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2026-1413 | 1 Sangfor | 1 Operation And Maintenance Security Management System | 2026-04-18 | 6.3 Medium |
| A vulnerability was found in Sangfor Operation and Maintenance Security Management System up to 3.0.12. This affects the function portValidate of the file /fort/ip_and_port/port_validate of the component HTTP POST Request Handler. Performing a manipulation of the argument port results in command injection. The attack can be initiated remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-1414 | 1 Sangfor | 1 Operation And Maintenance Security Management System | 2026-04-18 | 6.3 Medium |
| A vulnerability was determined in Sangfor Operation and Maintenance Security Management System up to 3.0.12. This impacts the function getInformation of the file /equipment/get_Information of the component HTTP POST Request Handler. Executing a manipulation of the argument fortEquipmentIp can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2026-1415 | 1 Gpac | 1 Gpac | 2026-04-18 | 3.3 Low |
| A vulnerability was identified in GPAC up to 2.4.0. Affected is the function gf_media_export_webvtt_metadata of the file src/media_tools/media_export.c. The manipulation of the argument Name leads to null pointer dereference. The attack must be carried out locally. The exploit is publicly available and might be used. The identifier of the patch is af951b892dfbaaa38336ba2eba6d6a42c25810fd. To fix this issue, it is recommended to deploy a patch. | ||||
| CVE-2026-1418 | 1 Gpac | 1 Gpac | 2026-04-18 | 5.3 Medium |
| A security vulnerability has been detected in GPAC up to 2.4.0. This affects the function gf_text_import_srt_bifs of the file src/scene_manager/text_to_bifs.c of the component SRT Subtitle Import. Such manipulation leads to out-of-bounds write. The attack needs to be performed locally. The exploit has been disclosed publicly and may be used. The name of the patch is 10c73b82cf0e367383d091db38566a0e4fe71772. It is best practice to apply a patch to resolve this issue. | ||||
| CVE-2026-1419 | 2 D-link, Dlink | 3 Dcs700l, Dcs-700l, Dcs-700l Firmware | 2026-04-18 | 4.7 Medium |
| A weakness has been identified in D-Link DCS700l 1.03.09. Affected is an unknown function of the file /setDayNightMode of the component Web Form Handler. Executing a manipulation of the argument LightSensorControl can lead to command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-6491 | 1 Libvips | 1 Libvips | 2026-04-18 | 5.3 Medium |
| A security vulnerability has been detected in libvips up to 8.18.2. The affected element is the function im_minpos_vec of the file libvips/deprecated/vips7compat.c of the component nip2 Handler. Such manipulation of the argument n leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed publicly and may be used. The vendor confirms that they will "be removing the deprecated area in libvips 8.19". | ||||
| CVE-2026-6486 | 1 Classroombookings | 1 Classroombookings | 2026-04-18 | 3.5 Low |
| A vulnerability was detected in classroombookings up to 2.17.0. This impacts the function read of the file crbs-core/application/views/layout.php of the component User Display Name Handler. The manipulation of the argument displayname results in cross site scripting. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 2.17.1 will fix this issue. The patch is identified as 69c3c9bb8a17f1ea572d8f4502bf238f0214c98a. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||
| CVE-2026-6494 | 1 Redhat | 1 Ansible Automation Platform | 2026-04-18 | 5.3 Medium |
| A flaw was found in the AAP MCP server. An unauthenticated remote attacker can exploit a log injection vulnerability by sending specially crafted input to the `toolsetroute` parameter. This parameter is not properly sanitized before being written to logs, allowing the attacker to inject control characters such as newlines and ANSI escape sequences. This enables the attacker to obscure legitimate log entries and insert forged ones, which could facilitate social engineering attacks, potentially leading to an operator executing dangerous commands or visiting malicious URLs. | ||||
| CVE-2026-40262 | 1 Enchant97 | 1 Note-mark | 2026-04-18 | 8.7 High |
| Note Mark is an open-source note-taking application. In versions 0.19.1 and prior, the asset delivery handler serves uploaded files inline and relies on magic-byte detection for content type, which does not identify text-based formats such as HTML, SVG, or XHTML. These files are served with an empty Content-Type, no X-Content-Type-Options: nosniff header, and inline disposition, allowing browsers to sniff and render active content. An authenticated user can upload an HTML or SVG file containing JavaScript as a note asset, and when a victim navigates to the asset URL, the script executes under the application's origin with access to the victim's authenticated session and API actions. This issue has been fixed in version 0.19.2. | ||||