Export limit exceeded: 345788 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (345788 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-33753 | 1 Trailofbits | 1 Rfc3161-client | 2026-04-21 | 6.2 Medium |
| rfc3161-client is a Python library implementing the Time-Stamp Protocol (TSP) described in RFC 3161. Prior to 1.0.6, an Authorization Bypass vulnerability in rfc3161-client's signature verification allows any attacker to impersonate a trusted TimeStamping Authority (TSA). By exploiting a logic flaw in how the library extracts the leaf certificate from an unordered PKCS#7 bag of certificates, an attacker can append a spoofed certificate matching the target common_name and Extended Key Usage (EKU) requirements. This tricks the library into verifying these authorization rules against the forged certificate while validating the cryptographic signature against an actual trusted TSA (such as FreeTSA), thereby bypassing the intended TSA authorization pinning entirely. This vulnerability is fixed in 1.0.6. | ||||
| CVE-2017-6740 | 1 Cisco | 2 Ios, Ios Xe | 2026-04-21 | 8.8 High |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | ||||
| CVE-2017-6743 | 1 Cisco | 2 Ios, Ios Xe | 2026-04-21 | 8.8 High |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | ||||
| CVE-2017-6744 | 1 Cisco | 1 Ios | 2026-04-21 | 8.8 High |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | ||||
| CVE-2017-12233 | 1 Cisco | 55 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 52 more | 2026-04-21 | 7.5 High |
| Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334. | ||||
| CVE-2017-12234 | 1 Cisco | 55 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 52 more | 2026-04-21 | 7.5 High |
| Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709. | ||||
| CVE-2017-12235 | 1 Cisco | 31 Industrial Ethernet 2000 16ptc-g-e Switch, Industrial Ethernet 2000 16ptc-g-l Switch, Industrial Ethernet 2000 16ptc-g-nx Switch and 28 more | 2026-04-21 | 7.5 High |
| A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179. | ||||
| CVE-2017-12237 | 1 Cisco | 301 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 298 more | 2026-04-21 | 7.5 High |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277. | ||||
| CVE-2017-12238 | 1 Cisco | 20 C6800-16p10g, C6800-16p10g-xl, Catalyst 6000 and 17 more | 2026-04-21 | 6.5 Medium |
| A vulnerability in the Virtual Private LAN Service (VPLS) code of Cisco IOS 15.0 through 15.4 for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, adjacent attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory management issue in the affected software. An attacker could exploit this vulnerability by creating a large number of VPLS-generated MAC entries in the MAC address table of an affected device. A successful exploit could allow the attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a DoS condition. This vulnerability affects Cisco Catalyst 6800 Series Switches that are running a vulnerable release of Cisco IOS Software and have a Cisco C6800-16P10G or C6800-16P10G-XL line card in use with Supervisor Engine 6T. To be vulnerable, the device must also be configured with VPLS and the C6800-16P10G or C6800-16P10G-XL line card needs to be the core-facing MPLS interfaces. Cisco Bug IDs: CSCva61927. | ||||
| CVE-2017-12240 | 1 Cisco | 265 1000 Integrated Services Router, 1100-4g Integrated Services Router, 1100-4gltegb Integrated Services Router and 262 more | 2026-04-21 | 9.8 Critical |
| The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959. | ||||
| CVE-2017-12231 | 1 Cisco | 329 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router, 1100-4gltegb Integrated Services Router and 326 more | 2026-04-21 | 7.5 High |
| A vulnerability in the implementation of Network Address Translation (NAT) functionality in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper translation of H.323 messages that use the Registration, Admission, and Status (RAS) protocol and are sent to an affected device via IPv4 packets. An attacker could exploit this vulnerability by sending a crafted H.323 RAS packet through an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to use an application layer gateway with NAT (NAT ALG) for H.323 RAS messages. By default, a NAT ALG is enabled for H.323 RAS messages. Cisco Bug IDs: CSCvc57217. | ||||
| CVE-2014-2120 | 1 Cisco | 1 Adaptive Security Appliance Software | 2026-04-21 | 5.4 Medium |
| Cross-site scripting (XSS) vulnerability in the WebVPN login page in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to inject arbitrary web script or HTML via an unspecified parameter, aka Bug ID CSCun19025. | ||||
| CVE-2010-0840 | 4 Canonical, Opensuse, Oracle and 1 more | 7 Ubuntu Linux, Opensuse, Jre and 4 more | 2026-04-21 | 9.8 Critical |
| Unspecified vulnerability in the Java Runtime Environment component in Oracle Java SE and Java for Business 6 Update 18, 5.0 Update 23, and 1.4.2_25 allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors. NOTE: the previous information was obtained from the March 2010 CPU. Oracle has not commented on claims from a reliable researcher that this is related to improper checks when executing privileged methods in the Java Runtime Environment (JRE), which allows attackers to execute arbitrary code via (1) an untrusted object that extends the trusted class but has not modified a certain method, or (2) "a similar trust issue with interfaces," aka "Trusted Methods Chaining Remote Code Execution Vulnerability." | ||||
| CVE-2015-2590 | 6 Canonical, Debian, Opensuse and 3 more | 25 Ubuntu Linux, Debian Linux, Opensuse and 22 more | 2026-04-21 | 9.8 Critical |
| Unspecified vulnerability in Oracle Java SE 6u95, 7u80, and 8u45, and Java SE Embedded 7u75 and 8u33 allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to Libraries, a different vulnerability than CVE-2015-4732. | ||||
| CVE-2025-14243 | 1 Redhat | 2 Mirror Registry, Mirror Registry For Red Hat Openshift | 2026-04-21 | 5.3 Medium |
| A flaw was found in the OpenShift Mirror Registry. This vulnerability allows an unauthenticated, remote attacker to enumerate valid usernames and email addresses via different error messages during authentication failures and account creation. | ||||
| CVE-2012-3152 | 1 Oracle | 1 Fusion Middleware | 2026-04-21 | 9.1 Critical |
| Unspecified vulnerability in the Oracle Reports Developer component in Oracle Fusion Middleware 11.1.1.4, 11.1.1.6, and 11.1.2.0 allows remote attackers to affect confidentiality and integrity via unknown vectors related to Report Server Component. NOTE: the previous information is from the October 2012 CPU. Oracle has not commented on claims from the original researcher that the URLPARAMETER functionality allows remote attackers to read and upload arbitrary files to reports/rwservlet, and that this issue occurs in earlier versions. NOTE: this can be leveraged with CVE-2012-3153 to execute arbitrary code by uploading a .jsp file. | ||||
| CVE-2017-8291 | 3 Artifex, Debian, Redhat | 9 Ghostscript, Debian Linux, Enterprise Linux and 6 more | 2026-04-21 | 7.8 High |
| Artifex Ghostscript through 2017-04-26 allows -dSAFER bypass and remote command execution via .rsdparams type confusion with a "/OutputFile (%pipe%" substring in a crafted .eps document that is an input to the gs program, as exploited in the wild in April 2017. | ||||
| CVE-2017-6884 | 1 Zyxel | 2 Emg2926, Emg2926 Firmware | 2026-04-21 | 8.8 High |
| A command injection vulnerability was discovered on the Zyxel EMG2926 home router with firmware V1.00(AAQT.4)b8. The vulnerability is located in the diagnostic tools, specifically the nslookup function. A malicious user may exploit numerous vectors to execute arbitrary commands on the router, such as the ping_ip parameter to the expert/maintenance/diagnostic/nslookup URI. | ||||
| CVE-2017-7269 | 1 Microsoft | 2 Internet Information Services, Windows Server 2003 | 2026-04-21 | 9.8 Critical |
| Buffer overflow in the ScStoragePathFromUrl function in the WebDAV service in Internet Information Services (IIS) 6.0 in Microsoft Windows Server 2003 R2 allows remote attackers to execute arbitrary code via a long header beginning with "If: <http://" in a PROPFIND request, as exploited in the wild in July or August 2016. | ||||
| CVE-2017-9248 | 2 Progress, Telerik | 2 Sitefinity, Ui For Asp.net Ajax | 2026-04-21 | 9.8 Critical |
| Telerik.Web.UI.dll in Progress Telerik UI for ASP.NET AJAX before R2 2017 SP1 and Sitefinity before 10.0.6412.0 does not properly protect Telerik.Web.UI.DialogParametersEncryptionKey or the MachineKey, which makes it easier for remote attackers to defeat cryptographic protection mechanisms, leading to a MachineKey leak, arbitrary file uploads or downloads, XSS, or ASP.NET ViewState compromise. | ||||