Export limit exceeded: 338702 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (338702 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31964 | 1 Samtools | 1 Htslib | 2026-03-19 | 5.0 Medium |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `CONST`, `XPACK` and `XRLE` encodings did not properly implement the interface needed to do this. Trying to decode records with omitted sequence or quality data using these encodings would result in an attempt to write to a NULL pointer. Exploiting this bug causes a NULL pointer dereference. Typically this will cause the program to crash. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-31965 | 1 Samtools | 1 Htslib | 2026-03-19 | 5.6 Medium |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, validation of the reference id field occurred too late, allowing two out of bounds reads to occur before the invalid data was detected. The bug does allow two values to be leaked to the caller, however as the function reports an error it may be difficult to exploit them. It is also possible that the program will crash due to trying to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-31966 | 1 Samtools | 1 Htslib | 2026-03-19 | N/A |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. As one method of removing redundant data, CRAM uses reference-based compression so that instead of storing the full sequence for each alignment record it stores a location in an external reference sequence along with a list of differences to the reference at that location as a sequence of "features". When decoding CRAM records, the reference data is stored in a char array, and parts matching the alignment record sequence are copied over as necessary. Due to insufficient validation of the feature data series, it was possible to make the `cram_decode_seq()` function copy data from either before the start, or after the end of the stored reference either into the buffer used to store the output sequence for the cram record, or into the buffer used to build the SAM `MD` tag. This allowed arbitrary data to be leaked to the calling function. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-31967 | 1 Samtools | 1 Htslib | 2026-03-19 | N/A |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, the value of the mate reference id field was not validated. Later use of this value, for example when converting the data to SAM format, could result in the out of bounds array reads when looking up the corresponding reference name. If the array value obtained also happened to be a valid pointer, it would be interpreted as a string and an attempt would be made to write the data as part of the SAM record. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-31968 | 1 Samtools | 1 Htslib | 2026-03-19 | N/A |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. For the `VARINT` and `CONST` encodings, incomplete validation of the context in which the encodings were used could result in up to eight bytes being written beyond the end of a heap allocation, or up to eight bytes being written to the location of a one byte variable on the stack, possibly causing the values to adjacent variables to change unexpectedly. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-4396 | 1 Devolutions | 1 Hub Reporting Service | 2026-03-19 | 8.3 High |
| Improper certificate validation in Devolutions Hub Reporting Service 2025.3.1.1 and earlier allows a network attacker to perform a man-in-the-middle attack via disabled TLS certificate verification. | ||||
| CVE-2026-31969 | 1 Samtools | 1 Htslib | 2026-03-19 | N/A |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_STOP` method, an out-by-one error in the `cram_byte_array_stop_decode_char()` function check for a full output buffer could result in a single attacker-controlled byte being written beyond the end of a heap allocation. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-31970 | 1 Samtools | 1 Htslib | 2026-03-19 | N/A |
| HTSlib is a library for reading and writing bioinformatics file formats. GZI files are used to index block-compressed GZIP [BGZF] files. In the GZI loading function, `bgzf_index_load_hfile()`, it was possible to trigger an integer overflow, leading to an under- or zero-sized buffer being allocated to store the index. Sixteen zero bytes would then be written to this buffer, and, depending on the result of the overflow the rest of the file may also be loaded into the buffer as well. If the function did attempt to load the data, it would eventually fail due to not reading the expected number of records, and then try to free the overflowed heap buffer. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. The easiest work-around is to discard any `.gzi` index files from untrusted sources, and use the `bgzip -r` option to recreate them. | ||||
| CVE-2026-31971 | 1 Samtools | 1 Htslib | 2026-03-19 | N/A |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_LEN` method, the `cram_byte_array_len_decode()` failed to validate that the amount of data being unpacked matched the size of the output buffer where it was to be stored. Depending on the data series being read, this could result either in a heap or a stack overflow with attacker-controlled bytes. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-25745 | 1 Openemr | 1 Openemr | 2026-03-19 | 6.5 Medium |
| OpenEMR is a free and open source electronic health records and medical practice management application. In versions up to and including 8.0.0, the message/note update endpoint (e.g. PUT or POST) updates by message/note ID only and does not verify that the message belongs to the current patient (or that the user is allowed to edit that patient’s notes). An authenticated user with notes permission can modify any patient’s messages by supplying another message ID. Commit 92a2ff9eaaa80674b3a934a6556e35e7aded5a41 contains a fix for the issue. | ||||
| CVE-2026-31972 | 1 Samtools | 1 Samtools | 2026-03-19 | N/A |
| SAMtools is a program for reading, manipulating and writing bioinformatics file formats. The `mpileup` command outputs DNA sequences that have been aligned against a known reference. On each output line it writes the reference position, optionally the reference DNA base at that position (obtained from a separate file) and all of the DNA bases that aligned to that position. As the output is ordered by position, reference data that is no longer needed is discarded once it has been printed out. Under certain conditions the data could be discarded too early, leading to an attempt to read from a pointer to freed memory. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. This bug is fixed in versions 1.21.1 and 1.22. There is no workaround for this issue. | ||||
| CVE-2026-31973 | 1 Samtools | 1 Samtools | 2026-03-19 | N/A |
| SAMtools is a program for reading, manipulating and writing bioinformatics file formats. Starting in version 1.17, in the cram-size command, used to write information about how well CRAM files are compressed, a check to see if the `cram_decode_compression_header()` was missing. If the function returned an error, this could lead to a NULL pointer dereference. Exploiting this bug causes a NULL pointer dereference. Typically this will cause the program to crash. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-32321 | 1 Macwarrior | 1 Clipbucket-v5 | 2026-03-19 | 8.8 High |
| ClipBucket v5 is an open source video sharing platform. An authenticated time-based blind SQL injection vulnerability exists in ClipBucket prior to 5.5.3 #80 within the `actions/ajax.php` endpoint. Due to insufficient input sanitization of the `userid` parameter, an authenticated attacker can execute arbitrary SQL queries, leading to full database disclosure and potential administrative account takeover. Version 5.5.3 #80 fixes the issue. | ||||
| CVE-2026-32636 | 1 Imagemagick | 1 Imagemagick | 2026-03-19 | 5.3 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-17 and 6.9.13-42, the NewXMLTree method contains a bug that could result in a crash due to an out of write bounds of a single zero byte. Versions 7.1.2-17 and 6.9.13-42 fix the issue. | ||||
| CVE-2026-32638 | 1 Withstudiocms | 1 Studiocms | 2026-03-19 | 2.7 Low |
| StudioCMS is a server-side-rendered, Astro native, headless content management system. Prior to 0.4.4, the REST API `getUsers` endpoint in StudioCMS uses the attacker-controlled `rank` query parameter to decide whether owner accounts should be filtered from the result set. As a result, an admin token can request `rank=owner` and receive owner account records, including IDs, usernames, display names, and email addresses, even though the adjacent `getUser` endpoint correctly blocks admins from viewing owner users. This is an authorization inconsistency inside the same user-management surface. Version 0.4.4 fixes the issue. | ||||
| CVE-2026-25873 | 1 Beijing Academy Of Artificial Intelligence | 1 Omnigen2-rl | 2026-03-19 | 9.8 Critical |
| OmniGen2-RL contains an unauthenticated remote code execution vulnerability in the reward server component that allows remote attackers to execute arbitrary commands by sending malicious HTTP POST requests. Attackers can exploit insecure pickle deserialization of request bodies to achieve code execution on the host system running the exposed service. | ||||
| CVE-2026-32700 | 1 Heartcombo | 1 Devise | 2026-03-19 | 6.8 Medium |
| Devise is an authentication solution for Rails based on Warden. Prior to version 5.0.3, a race condition in Devise's Confirmable module allows an attacker to confirm an email address they do not own. This affects any Devise application using the `reconfirmable` option (the default when using Confirmable with email changes). By sending two concurrent email change requests, an attacker can desynchronize the `confirmation_token` and `unconfirmed_email` fields. The confirmation token is sent to an email the attacker controls, but the `unconfirmed_email` in the database points to a victim's email address. When the attacker uses the token, the victim's email is confirmed on the attacker's account. This is patched in Devise v5.0.3. Users should upgrade as soon as possible. As a workaround, applications can override a specific method from Devise models to force `unconfirmed_email` to be persisted when unchanged. Note that Mongoid does not seem to respect that `will_change!` should force the attribute to be persisted, even if it did not really change, so the user might have to implement a workaround similar to Devise by setting `changed_attributes["unconfirmed_email"] = nil` as well. | ||||
| CVE-2026-32698 | 1 Opf | 1 Openproject | 2026-03-19 | 9.1 Critical |
| OpenProject is an open-source, web-based project management software. Versions prior to 16.6.9, 17.0.6, 17.1.3, and 17.2.1 are vulnerable to an SQL injection attack via a custom field's name. When that custom field was used in a Cost Report, the custom field's name was injected into the SQL query without proper sanitation. This allowed an attacker to execute arbitrary SQL commands during the generation of a Cost Report. As custom fields can only be generated by users with full administrator privileges, the attack surface is somewhat reduced. Together with another bug in the Repositories_module, that used the project identifier without sanitation to generate the checkout path for a git repository in the filesystem, this allowed an attacker to checkout a git repository to an arbitrarily chosen path on the server. If the checkout is done within certain paths within the OpenProject application, upon the next restart of the application, this allows the attacker to inject ruby code into the application. As the project identifier cannot be manually edited to any string containing special characters like dots or slashes, this needs to be changed via the SQL injection described above. Versions 16.6.9, 17.0.6, 17.1.3, and 17.2.1 fix the issue. | ||||
| CVE-2026-32703 | 1 Opf | 1 Openproject | 2026-03-19 | 9.1 Critical |
| OpenProject is an open-source, web-based project management software. In versions prior to 16.6.9, 17.0.6, 17.1.3, and 17.2.1, the Repositories module did not properly escape filenames displayed from repositories. This allowed an attacker with push access into the repository to create commits with filenames that included HTML code that was injected in the page without proper sanitation. This allowed a persisted XSS attack against all members of this project that accessed the repositories page to display a changeset where the maliciously crafted file was deleted. Versions 16.6.9, 17.0.6, 17.1.3, and 17.2.1 fix the issue. | ||||
| CVE-2026-32722 | 1 Bloomberg | 1 Memray | 2026-03-19 | 3.6 Low |
| Memray is a memory profiler for Python. Prior to Memray 1.19.2, Memray rendered the command line of the tracked process directly into generated HTML reports without escaping. Because there was no escaping, attacker-controlled command line arguments were inserted as raw HTML into the generated report. This allowed JavaScript execution when a victim opened the generated report in a browser. Version 1.19.2 fixes the issue. | ||||