Export limit exceeded: 346123 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (346123 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-20096 | 1 Cisco | 3 Enterprise Nfv Infrastructure Software, Unified Computing System, Unified Computing System Software | 2026-04-22 | 6.5 Medium |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with admin-level privileges to perform command injection attacks on an affected system and execute arbitrary commands as the root user. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. Cisco has assigned this vulnerability a Security Impact Rating (SIR) of High, rather than Medium as the score indicates, because additional security implications could occur once the attacker has become root. | ||||
| CVE-2026-20097 | 1 Cisco | 1 Unified Computing System | 2026-04-22 | 6.5 Medium |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with admin-level privileges to execute arbitrary code as the root user. This vulnerability is due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user. Cisco has assigned this vulnerability a SIR of High rather than Medium as the score indicates because additional security implications could occur when the attacker becomes root. | ||||
| CVE-2025-61886 | 1 Fortinet | 4 Fortisandbox, Fortisandbox Cloud, Fortisandbox Paas and 1 more | 2026-04-22 | 4.9 Medium |
| An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability [CWE-79] vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.4, FortiSandbox PaaS 5.0.0 through 5.0.4 may allow an attacker to perform an XSS attack via crafted HTTP requests. | ||||
| CVE-2026-35039 | 1 Nearform | 1 Fast-jwt | 2026-04-22 | 9.1 Critical |
| fast-jwt provides fast JSON Web Token (JWT) implementation. From 0.0.1 to before 6.2.0, setting up a custom cacheKeyBuilder method which does not properly create unique keys for different tokens can lead to cache collisions. This could cause tokens to be mis-identified during the verification process leading to valid tokens returning claims from different valid tokens and users being mis-identified as other users based on the wrong token. Version 6.2.0 contains a patch. | ||||
| CVE-2026-25185 | 1 Microsoft | 30 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 27 more | 2026-04-22 | 5.3 Medium |
| Exposure of sensitive information to an unauthorized actor in Windows Shell Link Processing allows an unauthorized attacker to perform spoofing over a network. | ||||
| CVE-2026-25178 | 1 Microsoft | 30 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 27 more | 2026-04-22 | 7 High |
| Use after free in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-31471 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: only publish mode_data after clone setup iptfs_clone_state() stores x->mode_data before allocating the reorder window. If that allocation fails, the code frees the cloned state and returns -ENOMEM, leaving x->mode_data pointing at freed memory. The xfrm clone unwind later runs destroy_state() through x->mode_data, so the failed clone path tears down IPTFS state that clone_state() already freed. Keep the cloned IPTFS state private until all allocations succeed so failed clones leave x->mode_data unset. The destroy path already handles a NULL mode_data pointer. | ||||
| CVE-2026-31472 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: validate inner IPv4 header length in IPTFS payload Add validation of the inner IPv4 packet tot_len and ihl fields parsed from decrypted IPTFS payloads in __input_process_payload(). A crafted ESP packet containing an inner IPv4 header with tot_len=0 causes an infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the data offset never advances and the while(data < tail) loop never terminates, spinning forever in softirq context. Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct iphdr), which catches both the tot_len=0 case and malformed ihl values. The normal IP stack performs this validation in ip_rcv_core(), but IPTFS extracts and processes inner packets before they reach that layer. | ||||
| CVE-2026-31474 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix tx.buf use-after-free in isotp_sendmsg() isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done. | ||||
| CVE-2026-31475 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup. | ||||
| CVE-2026-31482 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/entry: Scrub r12 register on kernel entry Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"), all entry handlers loaded r12 with the current task pointer (lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That commit removed TIF_ISOLATE_BP, dropping both the branch prediction macros and the r12 load, but did not add r12 to the register clearing sequence. Add the missing xgr %r12,%r12 to make the register scrub consistent across all entry points. | ||||
| CVE-2026-31483 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/syscalls: Add spectre boundary for syscall dispatch table The s390 syscall number is directly controlled by userspace, but does not have an array_index_nospec() boundary to prevent access past the syscall function pointer tables. | ||||
| CVE-2026-31485 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove(). | ||||
| CVE-2026-31486 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) Protect regulator operations with mutex The regulator operations pmbus_regulator_get_voltage(), pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage() access PMBus registers and shared data but were not protected by the update_lock mutex. This could lead to race conditions. However, adding mutex protection directly to these functions causes a deadlock because pmbus_regulator_notify() (which calls regulator_notifier_call_chain()) is often called with the mutex already held (e.g., from pmbus_fault_handler()). If a regulator callback then calls one of the now-protected voltage functions, it will attempt to acquire the same mutex. Rework pmbus_regulator_notify() to utilize a worker function to send notifications outside of the mutex protection. Events are stored as atomics in a per-page bitmask and processed by the worker. Initialize the worker and its associated data during regulator registration, and ensure it is cancelled on device removal using devm_add_action_or_reset(). While at it, remove the unnecessary include of linux/of.h. | ||||
| CVE-2026-31498 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED state to support L2CAP reconfiguration (e.g. MTU changes). However, since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from the initial configuration, the reconfiguration path falls through to l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and retrans_list without freeing the previous allocations and sets chan->sdu to NULL without freeing the existing skb. This leaks all previously allocated ERTM resources. Additionally, l2cap_parse_conf_req() does not validate the minimum value of remote_mps derived from the RFC max_pdu_size option. A zero value propagates to l2cap_segment_sdu() where pdu_len becomes zero, causing the while loop to never terminate since len is never decremented, exhausting all available memory. Fix the double-init by skipping l2cap_ertm_init() and l2cap_chan_ready() when the channel is already in BT_CONNECTED state, while still allowing the reconfiguration parameters to be updated through l2cap_parse_conf_req(). Also add a pdu_len zero check in l2cap_segment_sdu() as a safeguard. | ||||
| CVE-2026-31516 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: prevent policy_hthresh.work from racing with netns teardown A XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. The queued callback, xfrm_hash_rebuild(), retrieves the enclosing struct net via container_of(). If the net namespace is torn down before that work runs, the associated struct net may already have been freed, and xfrm_hash_rebuild() may then dereference stale memory. xfrm_policy_fini() already flushes policy_hash_work during teardown, but it does not synchronize policy_hthresh.work. Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the queued work cannot outlive the net namespace teardown and access a freed struct net. | ||||
| CVE-2026-31517 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner packet 'newskb' that is being reassembled. First a zero-copy approach is tried if it succeeds then newskb becomes non-linear. When a subsequent fragment in the same datagram does not meet the fast-path conditions, a memory copy is performed. It calls skb_put() to append the data and as newskb is non-linear it triggers SKB_LINEAR_ASSERT check. Oops: invalid opcode: 0000 [#1] SMP NOPTI [...] RIP: 0010:skb_put+0x3c/0x40 [...] Call Trace: <IRQ> iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs] iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs] iptfs_input+0x122/0x3e0 [xfrm_iptfs] xfrm_input+0x91e/0x1a50 xfrm4_esp_rcv+0x3a/0x110 ip_protocol_deliver_rcu+0x1d7/0x1f0 ip_local_deliver_finish+0xbe/0x1e0 __netif_receive_skb_core.constprop.0+0xb56/0x1120 __netif_receive_skb_list_core+0x133/0x2b0 netif_receive_skb_list_internal+0x1ff/0x3f0 napi_complete_done+0x81/0x220 virtnet_poll+0x9d6/0x116e [virtio_net] __napi_poll.constprop.0+0x2b/0x270 net_rx_action+0x162/0x360 handle_softirqs+0xdc/0x510 __irq_exit_rcu+0xe7/0x110 irq_exit_rcu+0xe/0x20 common_interrupt+0x85/0xa0 </IRQ> <TASK> Fix this by checking if the skb is non-linear. If it is, linearize it by calling skb_linearize(). As the initial allocation of newskb originally reserved enough tailroom for the entire reassembled packet we do not need to check if we have enough tailroom or extend it. | ||||
| CVE-2026-31525 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN The BPF interpreter's signed 32-bit division and modulo handlers use the kernel abs() macro on s32 operands. The abs() macro documentation (include/linux/math.h) explicitly states the result is undefined when the input is the type minimum. When DST contains S32_MIN (0x80000000), abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged on arm64/x86. This value is then sign-extended to u64 as 0xFFFFFFFF80000000, causing do_div() to compute the wrong result. The verifier's abstract interpretation (scalar32_min_max_sdiv) computes the mathematically correct result for range tracking, creating a verifier/interpreter mismatch that can be exploited for out-of-bounds map value access. Introduce abs_s32() which handles S32_MIN correctly by casting to u32 before negating, avoiding signed overflow entirely. Replace all 8 abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers. s32 is the only affected case -- the s64 division/modulo handlers do not use abs(). | ||||
| CVE-2026-31528 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: Make sure to use pmu_ctx->pmu for groups Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access when group_sched_in() fails and needs to roll back. This *should* be handled by the transaction callbacks, but he found that when the group leader is a software event, the transaction handlers of the wrong PMU are used. Despite the move_group case in perf_event_open() and group_sched_in() using pmu_ctx->pmu. Turns out, inherit uses event->pmu to clone the events, effectively undoing the move_group case for all inherited contexts. Fix this by also making inherit use pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context. Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the group case. | ||||
| CVE-2026-31529 | 1 Linux | 1 Linux Kernel | 2026-04-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix leakage in __construct_region() Failing the first sysfs_update_group() needs to explicitly kfree the resource as it is too early for cxl_region_iomem_release() to do so. | ||||