| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix enumeration completion
The soundwire subsystem uses two completion structures that allow
drivers to wait for soundwire device to become enumerated on the bus and
initialised by their drivers, respectively.
The code implementing the signalling is currently broken as it does not
signal all current and future waiters and also uses the wrong
reinitialisation function, which can potentially lead to memory
corruption if there are still waiters on the queue.
Not signalling future waiters specifically breaks sound card probe
deferrals as codec drivers can not tell that the soundwire device is
already attached when being reprobed. Some codec runtime PM
implementations suffer from similar problems as waiting for enumeration
during resume can also timeout despite the device already having been
enumerated. |
| A vulnerability was found in libssh, where an uninitialized variable exists under certain conditions in the privatekey_from_file() function. This flaw can be triggered if the file specified by the filename doesn't exist and may lead to possible signing failures or heap corruption. |
| A weakness has been identified in SpyShelter up to 15.4.0.1015. Affected is an unknown function in the library SpyShelter.sys of the component IOCTL Handler. This manipulation causes denial of service. The attack needs to be launched locally. The exploit has been made available to the public and could be exploited. Upgrading to version 15.4.0.1028 is able to address this issue. It is advisable to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both
PCI and VIO buses. struct notifier_block is a linked list node, so this
causes any notifiers later registered to either bus type to also be
registered to the other since they share the same node.
This causes issues in (at least) the vgaarb code, which registers a
notifier for PCI buses. pci_notify() ends up being called on a vio
device, converted with to_pci_dev() even though it's not a PCI device,
and finally makes a bad access in vga_arbiter_add_pci_device() as
discovered with KASAN:
BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00
Read of size 4 at addr c000000264c26fdc by task swapper/0/1
Call Trace:
dump_stack_lvl+0x1bc/0x2b8 (unreliable)
print_report+0x3f4/0xc60
kasan_report+0x244/0x698
__asan_load4+0xe8/0x250
vga_arbiter_add_pci_device+0x60/0xe00
pci_notify+0x88/0x444
notifier_call_chain+0x104/0x320
blocking_notifier_call_chain+0xa0/0x140
device_add+0xac8/0x1d30
device_register+0x58/0x80
vio_register_device_node+0x9ac/0xce0
vio_bus_scan_register_devices+0xc4/0x13c
__machine_initcall_pseries_vio_device_init+0x94/0xf0
do_one_initcall+0x12c/0xaa8
kernel_init_freeable+0xa48/0xba8
kernel_init+0x64/0x400
ret_from_kernel_thread+0x5c/0x64
Fix this by creating separate notifier_block structs for each bus type.
[mpe: Add #ifdef to fix CONFIG_IBMVIO=n build] |
| In the Linux kernel, the following vulnerability has been resolved:
net: prevent skb corruption on frag list segmentation
Ian reported several skb corruptions triggered by rx-gro-list,
collecting different oops alike:
[ 62.624003] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 62.631083] #PF: supervisor read access in kernel mode
[ 62.636312] #PF: error_code(0x0000) - not-present page
[ 62.641541] PGD 0 P4D 0
[ 62.644174] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 62.648629] CPU: 1 PID: 913 Comm: napi/eno2-79 Not tainted 6.4.0 #364
[ 62.655162] Hardware name: Supermicro Super Server/A2SDi-12C-HLN4F, BIOS 1.7a 10/13/2022
[ 62.663344] RIP: 0010:__udp_gso_segment (./include/linux/skbuff.h:2858
./include/linux/udp.h:23 net/ipv4/udp_offload.c:228 net/ipv4/udp_offload.c:261
net/ipv4/udp_offload.c:277)
[ 62.687193] RSP: 0018:ffffbd3a83b4f868 EFLAGS: 00010246
[ 62.692515] RAX: 00000000000000ce RBX: 0000000000000000 RCX: 0000000000000000
[ 62.699743] RDX: ffffa124def8a000 RSI: 0000000000000079 RDI: ffffa125952a14d4
[ 62.706970] RBP: ffffa124def8a000 R08: 0000000000000022 R09: 00002000001558c9
[ 62.714199] R10: 0000000000000000 R11: 00000000be554639 R12: 00000000000000e2
[ 62.721426] R13: ffffa125952a1400 R14: ffffa125952a1400 R15: 00002000001558c9
[ 62.728654] FS: 0000000000000000(0000) GS:ffffa127efa40000(0000)
knlGS:0000000000000000
[ 62.736852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 62.742702] CR2: 00000000000000c0 CR3: 00000001034b0000 CR4: 00000000003526e0
[ 62.749948] Call Trace:
[ 62.752498] <TASK>
[ 62.779267] inet_gso_segment (net/ipv4/af_inet.c:1398)
[ 62.787605] skb_mac_gso_segment (net/core/gro.c:141)
[ 62.791906] __skb_gso_segment (net/core/dev.c:3403 (discriminator 2))
[ 62.800492] validate_xmit_skb (./include/linux/netdevice.h:4862
net/core/dev.c:3659)
[ 62.804695] validate_xmit_skb_list (net/core/dev.c:3710)
[ 62.809158] sch_direct_xmit (net/sched/sch_generic.c:330)
[ 62.813198] __dev_queue_xmit (net/core/dev.c:3805 net/core/dev.c:4210)
net/netfilter/core.c:626)
[ 62.821093] br_dev_queue_push_xmit (net/bridge/br_forward.c:55)
[ 62.825652] maybe_deliver (net/bridge/br_forward.c:193)
[ 62.829420] br_flood (net/bridge/br_forward.c:233)
[ 62.832758] br_handle_frame_finish (net/bridge/br_input.c:215)
[ 62.837403] br_handle_frame (net/bridge/br_input.c:298
net/bridge/br_input.c:416)
[ 62.851417] __netif_receive_skb_core.constprop.0 (net/core/dev.c:5387)
[ 62.866114] __netif_receive_skb_list_core (net/core/dev.c:5570)
[ 62.871367] netif_receive_skb_list_internal (net/core/dev.c:5638
net/core/dev.c:5727)
[ 62.876795] napi_complete_done (./include/linux/list.h:37
./include/net/gro.h:434 ./include/net/gro.h:429 net/core/dev.c:6067)
[ 62.881004] ixgbe_poll (drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3191)
[ 62.893534] __napi_poll (net/core/dev.c:6498)
[ 62.897133] napi_threaded_poll (./include/linux/netpoll.h:89
net/core/dev.c:6640)
[ 62.905276] kthread (kernel/kthread.c:379)
[ 62.913435] ret_from_fork (arch/x86/entry/entry_64.S:314)
[ 62.917119] </TASK>
In the critical scenario, rx-gro-list GRO-ed packets are fed, via a
bridge, both to the local input path and to an egress device (tun).
The segmentation of such packets unsafely writes to the cloned skbs
with shared heads.
This change addresses the issue by uncloning as needed the
to-be-segmented skbs. |
| Insecure Storage of Sensitive Information vulnerability in Birtech Information Technologies Industry and Trade Ltd. Co. Senseway allows Retrieve Embedded Sensitive Data.This issue affects Senseway: through 09022026.
NOTE: Because the product was developed using outdated technology, the manufacturer is unable to fix the relevant vulnerabilities. Users of the Sensaway application are advised to contact the manufacturer and review updated products developed with newer technology. |
| In the Linux kernel, the following vulnerability has been resolved:
media: anysee: fix null-ptr-deref in anysee_master_xfer
In anysee_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach anysee_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
[hverkuil: add spaces around +] |
| Improper Authentication vulnerability in Birtech Information Technologies Industry and Trade Ltd. Co. Senseway allows Authentication Abuse.This issue affects Senseway: through 09022026.
NOTE: Because the product was developed using outdated technology, the manufacturer is unable to fix the relevant vulnerabilities. Users of the Sensaway application are advised to contact the manufacturer and review updated products developed with newer technology. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pv: fix index value of replaced ASCE
The index field of the struct page corresponding to a guest ASCE should
be 0. When replacing the ASCE in s390_replace_asce(), the index of the
new ASCE should also be set to 0.
Having the wrong index might lead to the wrong addresses being passed
around when notifying pte invalidations, and eventually to validity
intercepts (VM crash) if the prefix gets unmapped and the notifier gets
called with the wrong address. |
| O'View MapServer developed by PilotGaea Technologies has a Server-Side Request Forgery vulnerability, allowing unauthenticated remote attackers to exploit this vulnerability to probe internal network. |
| The sr_feuser_register extension through 12.4.8 for TYPO3 allows Remote Code Execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbe: Fix panic during XDP_TX with > 64 CPUs
Commit 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus")
adds support to allow XDP programs to run on systems with more than
64 CPUs by locking the XDP TX rings and indexing them using cpu % 64
(IXGBE_MAX_XDP_QS).
Upon trying this out patch on a system with more than 64 cores,
the kernel paniced with an array-index-out-of-bounds at the return in
ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx
was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example
splat:
==========================================================================
UBSAN: array-index-out-of-bounds in
/var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26
index 65 is out of range for type 'ixgbe_ring *[64]'
==========================================================================
BUG: kernel NULL pointer dereference, address: 0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 65 PID: 408 Comm: ksoftirqd/65
Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu
Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020
RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe]
Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9
00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7
47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0
RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282
RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000
RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000
RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001
R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000
R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c
FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
ixgbe_poll+0x103e/0x1280 [ixgbe]
? sched_clock_cpu+0x12/0xe0
__napi_poll+0x30/0x160
net_rx_action+0x11c/0x270
__do_softirq+0xda/0x2ee
run_ksoftirqd+0x2f/0x50
smpboot_thread_fn+0xb7/0x150
? sort_range+0x30/0x30
kthread+0x127/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x30
</TASK>
I think this is how it happens:
Upon loading the first XDP program on a system with more than 64 CPUs,
ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However,
immediately after this, the rings are reconfigured by ixgbe_setup_tc.
ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls
ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop.
ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if
it is non-zero. Commenting out the decrement in ixgbe_free_q_vector
stopped my system from panicing.
I suspect to make the original patch work, I would need to load an XDP
program and then replace it in order to get ixgbe_xdp_locking_key back
above 0 since ixgbe_setup_tc is only called when transitioning between
XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is
incremented every time ixgbe_xdp_setup is called.
Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this
becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems
with more than 64 CPUs.
Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied
to the number of CPUs present, there is no reason to disable it upon
unloading an XDP program. To avoid confusion, I have moved enabling
ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path. |
| Allocation of Resources Without Limits or Throttling vulnerability in Erlang OTP ssh (ssh_sftp modules) allows Excessive Allocation, Resource Leak Exposure. This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl.
This issue affects OTP form OTP 17.0 until OTP 28.0.3, OTP 27.3.4.3 and 26.2.5.15 corresponding to ssh from 3.0.1 until 5.3.3, 5.2.11.3 and 5.1.4.12. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_pmem: add the missing REQ_OP_WRITE for flush bio
When doing mkfs.xfs on a pmem device, the following warning was
------------[ cut here ]------------
WARNING: CPU: 2 PID: 384 at block/blk-core.c:751 submit_bio_noacct
Modules linked in:
CPU: 2 PID: 384 Comm: mkfs.xfs Not tainted 6.4.0-rc7+ #154
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:submit_bio_noacct+0x340/0x520
......
Call Trace:
<TASK>
? submit_bio_noacct+0xd5/0x520
submit_bio+0x37/0x60
async_pmem_flush+0x79/0xa0
nvdimm_flush+0x17/0x40
pmem_submit_bio+0x370/0x390
__submit_bio+0xbc/0x190
submit_bio_noacct_nocheck+0x14d/0x370
submit_bio_noacct+0x1ef/0x520
submit_bio+0x55/0x60
submit_bio_wait+0x5a/0xc0
blkdev_issue_flush+0x44/0x60
The root cause is that submit_bio_noacct() needs bio_op() is either
WRITE or ZONE_APPEND for flush bio and async_pmem_flush() doesn't assign
REQ_OP_WRITE when allocating flush bio, so submit_bio_noacct just fail
the flush bio.
Simply fix it by adding the missing REQ_OP_WRITE for flush bio. And we
could fix the flush order issue and do flush optimization later. |
| Statistical Database System developed by Gotac has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to read, modify, and delete database contents with high-level privileges. |
| The cs_seo extension through 9.2.0 for TYPO3 allows XSS. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix possible null-ptr-deref in ubi_free_volume()
It willl cause null-ptr-deref in the following case:
uif_init()
ubi_add_volume()
cdev_add() -> if it fails, call kill_volumes()
device_register()
kill_volumes() -> if ubi_add_volume() fails call this function
ubi_free_volume()
cdev_del()
device_unregister() -> trying to delete a not added device,
it causes null-ptr-deref
So in ubi_free_volume(), it delete devices whether they are added
or not, it will causes null-ptr-deref.
Handle the error case whlie calling ubi_add_volume() to fix this
problem. If add volume fails, set the corresponding vol to null,
so it can not be accessed in kill_volumes() and release the
resource in ubi_add_volume() error path. |
| The femanager extension through 8.2.1 for TYPO3 allows Insecure Direct Object Reference. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add preempt_count_{sub,add} into btf id deny list
The recursion check in __bpf_prog_enter* and __bpf_prog_exit*
leave preempt_count_{sub,add} unprotected. When attaching trampoline to
them we get panic as follows,
[ 867.843050] BUG: TASK stack guard page was hit at 0000000009d325cf (stack is 0000000046a46a15..00000000537e7b28)
[ 867.843064] stack guard page: 0000 [#1] PREEMPT SMP NOPTI
[ 867.843067] CPU: 8 PID: 11009 Comm: trace Kdump: loaded Not tainted 6.2.0+ #4
[ 867.843100] Call Trace:
[ 867.843101] <TASK>
[ 867.843104] asm_exc_int3+0x3a/0x40
[ 867.843108] RIP: 0010:preempt_count_sub+0x1/0xa0
[ 867.843135] __bpf_prog_enter_recur+0x17/0x90
[ 867.843148] bpf_trampoline_6442468108_0+0x2e/0x1000
[ 867.843154] ? preempt_count_sub+0x1/0xa0
[ 867.843157] preempt_count_sub+0x5/0xa0
[ 867.843159] ? migrate_enable+0xac/0xf0
[ 867.843164] __bpf_prog_exit_recur+0x2d/0x40
[ 867.843168] bpf_trampoline_6442468108_0+0x55/0x1000
...
[ 867.843788] preempt_count_sub+0x5/0xa0
[ 867.843793] ? migrate_enable+0xac/0xf0
[ 867.843829] __bpf_prog_exit_recur+0x2d/0x40
[ 867.843837] BUG: IRQ stack guard page was hit at 0000000099bd8228 (stack is 00000000b23e2bc4..000000006d95af35)
[ 867.843841] BUG: IRQ stack guard page was hit at 000000005ae07924 (stack is 00000000ffd69623..0000000014eb594c)
[ 867.843843] BUG: IRQ stack guard page was hit at 00000000028320f0 (stack is 00000000034b6438..0000000078d1bcec)
[ 867.843842] bpf_trampoline_6442468108_0+0x55/0x1000
...
That is because in __bpf_prog_exit_recur, the preempt_count_{sub,add} are
called after prog->active is decreased.
Fixing this by adding these two functions into btf ids deny list. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Eksagate Electronic Engineering and Computer Industry Trade Inc. Webpack Management System allows SQL Injection.This issue affects Webpack Management System: through 20251119. |
